Replies continued
IllusionXBrossard, QC · Jan 18, 2017#51I snapped this yesterday.. 4300K HID with stock reflector housing.
Picture not included in this copy
Sent from my SM-G930W8 using Tapatalk
ExiwolfmanWasaga beach · Jan 18, 2017#52 Originally Posted by
IllusionX ↑ I snapped this yesterday.. 4300K HID with stock reflector housing.
Picture not included in this copy
Sent from my SM-G930W8 using Tapatalk
Looks good and the cut off is not to crazy
Sent from my SM-G935F using Tapatalk
Kaotic LazagnaCentral Valley, CA · Jan 18, 2017#53 Originally Posted by
IllusionX ↑ I snapped this yesterday.. 4300K HID with stock reflector housing.
Picture not included in this copy
Sent from my SM-G930W8 using Tapatalk
Might just be the way the car was parked, but I think the passenger side needs to be aimed slightly lower 🤷
ExiwolfmanWasaga beach · Jan 18, 2017#54 Originally Posted by
Kaotic Lazagna ↑ Might just be the way the car was parked, but I think the passenger side needs to be aimed slightly lower 🤷
Passenger side can stay higher it's the driver side that should be lower so one does not blind on coming traffic or both even works well too.
Sent from my SM-G935F using Tapatalk
IllusionXBrossard, QC · Jan 18, 2017#55They are aimed exactly the same height. It's the way the headlights are made for LHD, passenger side always angles up toward road side signs.
Sent from my SM-G930W8 using Tapatalk
ExiwolfmanWasaga beach · Jan 18, 2017#56 Originally Posted by
IllusionX ↑ They are aimed exactly the same height. It's the way the headlights are made for LHD, passenger side always angles up toward road side signs.
Sent from my SM-G930W8 using Tapatalk
Yup it does
Sent from my SM-G935F using Tapatalk
Kaotic LazagnaCentral Valley, CA · Jan 18, 2017#57 Originally Posted by
Exiwolfman ↑ Passenger side can stay higher it's the driver side that should be lower so one does not blind on coming traffic or both even works well too.
Sent from my SM-G935F using Tapatalk
Originally Posted by
IllusionX ↑ They are aimed exactly the same height. It's the way the headlights are made for LHD, passenger side always angles up toward road side signs.
Sent from my SM-G930W8 using Tapatalk
The picture makes the passenger hotspot look like it sits higher than the driverside.
I am well aware of LHD and RHD cutoffs. The LHD cut off looks like
____/ ____/
What I was saying is in the picture, the "horizontal line" looks like it's higher than the drivers side, like:
..........._____/
_____/
but like I said, it could just be the way the car was parked in relation to the house.
Kaotic LazagnaCentral Valley, CA · Jan 18, 2017#58Picture not included in this copy
That's what it should look like.
Kaotic LazagnaCentral Valley, CA · Jan 18, 2017#59But I just realized the door is actually not on the same plane as the garage, so that's why the passenger side appears to be higher than the driver side.
IllusionXBrossard, QC · Jan 19, 2017#60I started backing off and turning on a slanted driveway.
Sent from my SM-G930W8 using Tapatalk
Yaris709Thread starterNewfoundland · Jan 20, 2017#61How do I adjust the lights on my yaris sedan guys? The lights aren't aimed properly would like to get them aimed correctly
ExiwolfmanWasaga beach · Jan 20, 2017#62 Originally Posted by
Yaris709 ↑ How do I adjust the lights on my yaris sedan guys? The lights aren't aimed properly would like to get them aimed correctly
Adjust screw at top open hood
Sent from my SM-G935F using Tapatalk
Kaotic LazagnaCentral Valley, CA · Jan 20, 2017#63 Originally Posted by
Yaris709 ↑ How do I adjust the lights on my yaris sedan guys? The lights aren't aimed properly would like to get them aimed correctly
On the back of each headlight, iirc, there are metal adjustment knobs (it's hard to miss). I believe it's an 8mm to adjust.
BennyLavaTexas · Jan 29, 2017#64 Originally Posted by
tmontague ↑ Fwiw i only had condesation on one or m'y headlights after m'y original install when i tried reusing thé oem sealant. I then went To Lowes and bought à proper sealant that stays flexible and since then have had no issues in all types of weather and temperatures.
Imo if you don't want to deal with properly sealing them or the potential headache then don't do the mod, or pay for someone else to do it. Or like you did, manually point them down so they don't blind others - however this ends up leading to poor light patterns like you stated which brings me back to my previous point of do it properly or not at all
Do you have a thread where you took apart the Yaris headlight and installed the lenses? I don't want to blind anyone, but I want those LED's! I'm no stranger to DIY so hopefully I can just copy whatever you did. I have a 2009 sedan. I hope you don't lose any brightness and/or visibility by using a lens. But I have to have some kind of cuttoff for the beam where I am, because as far as I know its against the law to have lights that blind people and you will get pulled over for it.
tarkusYYZ · Feb 11, 2017#65Yaris874Nahant M.A · Mar 6, 2017#66I got one different brand on ebay for 22 am goin to try to do it today may be
Sent from my SM-G935T using Tapatalk
Yaris874Nahant M.A · Mar 6, 2017#67The ones on ebay ar not built in hid
So the Amazon are is the only difference
Sent from my SM-G935T using Tapatalk
Yaris874Nahant M.A · Mar 6, 2017#68But u still have to buy the ballast on the Amazon ones the ebay ones u buy ur Owen so u can pick ur color and 35w or 55w
Sent from my SM-G935T using Tapatalk
tarkusYYZ · Mar 6, 2017#69 Originally Posted by
Yaris874 ↑ I got one different brand on ebay for 22 am goin to try to do it today may be
Sent from my SM-G935T using Tapatalk
Can you share the eBay link?
Sent from my phone with Tapatalk. Please excuse any typpos.
Yaris874Nahant M.A · Mar 6, 2017#70Picture not included in this copy
Sent from my SM-G935T using Tapatalk
Yaris874Nahant M.A · Mar 6, 2017#71Picture not included in this copy
Sent from my SM-G935T using Tapatalk
Right side in the projector left is regular
Yaris874Nahant M.A · Mar 6, 2017#72 Originally Posted by ryryAP2 ↑
Plan on using LEDs or HIDs to pair with them?
U can only fit hid
Sent from my SM-G935T using Tapatalk
Yaris874Nahant M.A · Mar 6, 2017#73 Originally Posted by
tarkus ↑ Can you share the eBay link?
Sent from my phone with Tapatalk. Please excuse any typpos.
Picture not included in this copy Sent from my SM-G935T using Tapatalk
Yaris874Nahant M.A · Mar 6, 2017#74 Originally Posted by ryryAP2 ↑
@Yaris874
Thanks for the good info and pictures. If you can get us some night time photos as well. I'm thinking of going this route now Picture not included in this copy
Ok give me couple days I just did it on my lunch brake just did one side I take some pictures when am done
Sent from my SM-G935T using Tapatalk
Yaris874Nahant M.A · Mar 6, 2017#75Thanks
Sent from my SM-G935T using Tapatalk
Yaris874Nahant M.A · Mar 6, 2017#76Picture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copy this is all low beam
I Google how height to aim the lights they said 25 feet 3.5 height ??? They look high
I haven't connected the high beam am waiting for the cables I put some pictures of high beam when I get it
Sent from my SM-G935T using Tapatalk
shiroyarisOC · Mar 6, 2017#77874 thanks for your time and efforts in getting the pictures... definitely considering them, just have to get the ballasts and relay's and all the other stuff!!!
Kaotic LazagnaCentral Valley, CA · Mar 7, 2017#78Park on a level surface parallel to a wall (driver side to the wall). Adjust driver side headlight until the cutoff is on a slight decline (ideal is 1* downward). Then park perpendicular to the wall on a level surface (farther the better to be around 30 feet away). Adjust passenger side headlight so that the top portion of the stepped cutoff of the driver side matches the passenger side's stepped cutoff.
You've just now adjusted your headlights based off your car's ride height so that it doesn't blind on coming traffic.
Kaotic LazagnaCentral Valley, CA · Mar 7, 2017#79So based on 874's third pic down (provided the ground is level, which is hard to tell), it looks like his driver side headlight is at least +10*. Given he's gone for the the double stepped cutoff (top part of the driver side is in line with the passenger side bottom), potentially blinding on coming traffic pretty bad. Again, it could just be that road is going down hill in the third pic.
Yaris874Nahant M.A · Mar 7, 2017#80So this is everything I got from ebay except the ballast because I had somePicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copy
Sent from my SM-G935T using Tapatalk
thebarberGrand Rapids, MI · Mar 7, 2017#81Picture not included in this copy
Yaris874Nahant M.A · Mar 7, 2017#82Picture not included in this copy ok so I when to one of my friends gas station the they do inspection stickers the is 12 feet from the wall 25" from the floor
Sent from my SM-G935T using Tapatalk
Kaotic LazagnaCentral Valley, CA · Mar 7, 2017#83 Originally Posted by
Yaris874 ↑ Picture not included in this copy ok so I when to one of my friends gas station the they do inspection stickers the is 12 feet from the wall 25" from the floor
Sent from my SM-G935T using Tapatalk
As long as it ends up being a declined angle. Also decided on a single step vs a double step adjustment?
Yaris874Nahant M.A · Mar 7, 2017#84Am getting confused single step double step can u explain ??
so they way off r.l bi 6" l.l bi 3 " am goin to check tonight
Sent from my SM-G935T using Tapatalk
Kaotic LazagnaCentral Valley, CA · Mar 7, 2017#85 Originally Posted by
Yaris874 ↑ Am getting confused single step double step can u explain ??
so they way off r.l bi 6" l.l bi 3 " am goin to check tonight
Sent from my SM-G935T using Tapatalk
Sorry. Okay, you know how projectors have a cutoff? The cutoff is comprised of a lower line, slant in the middle, and continues as a higher line, so a single step. When the passenger side's lower line is at the same level as the driver side's higher line, the entire cutoff is comprised of two steps.
Yaris874Nahant M.A · Mar 7, 2017#86Picture not included in this copy so this is single step
Sent from my SM-G935T using Tapatalk
Kaotic LazagnaCentral Valley, CA · Mar 7, 2017#87Single step set up:
Picture not included in this copy
Double step set up:
Picture not included in this copy
Kaotic LazagnaCentral Valley, CA · Mar 7, 2017#88 Originally Posted by
Yaris874 ↑ Picture not included in this copy so this is single step
Sent from my SM-G935T using Tapatalk
That would be a double step.
It's all just preference, but I ended up going to the single step (proper way actually) from a double step. In order for me to not blind on coming traffic at the time, I had to get the passenger side along a parallel wall to be as close to horizontal as possible, and then adjust the driver side down. Well, that sacrificed some throw in favor of shining up road signs, and that just wasn't worth it to me.
Yaris874Nahant M.A · Mar 7, 2017#89Thank u bro I learn something new today thank u
Sent from my SM-G935T using Tapatalk
Kaotic LazagnaCentral Valley, CA · Mar 7, 2017#90 Originally Posted by
Yaris874 ↑ Thank u bro I learn something new today thank u
Sent from my SM-G935T using Tapatalk
No problem. Drive around which each set up to see which you like better. 👍
Yaris874Nahant M.A · Mar 7, 2017#91Maybe u can help me with this so I put the hid h3 in but because was h4 so I connected the Lil motor for the cutoff for high beam I connected to ground of the h4 plug and positive on the highbeam plug so when I flick to high beam the hid cut off so I purchased this maybe Thas the issue?? What u think
Picture not included in this copy
Sent from my SM-G935T using Tapatalk
Kaotic LazagnaCentral Valley, CA · Mar 7, 2017#92Try unpinning the two vertical prongs on the harness (the part that plugs into the OEM connector) and switch the two and repin. Try that to see if it fixes your high beam issue.
Yaris874Nahant M.A · Mar 7, 2017#93Ok thanks
Sent from my SM-G935T using Tapatalk
Yaris874Nahant M.A · Mar 8, 2017#94 Originally Posted by
Kaotic Lazagna ↑ Try unpinning the two vertical prongs on the harness (the part that plugs into the OEM connector) and switch the two and repin. Try that to see if it fixes your high beam issue.
Picture not included in this copy Sent from my SM-G935T using Tapatalk
Yaris874Nahant M.A · Mar 8, 2017#95 Originally Posted by ryryAP2 ↑
@yaris847 was thinking of doing the same setup without the relay. Amazon had similar products, but of course I needed to get ballasts and bulbs. I went with Kensington ballasts and bulbs and iJDMTOy easy relay harness for the bi-xenon.
Nice take some pictures when u done
Sent from my SM-G935T using Tapatalk
Kaotic LazagnaCentral Valley, CA · Mar 8, 2017#96 Originally Posted by
Yaris874 ↑ Picture not included in this copy
Sent from my SM-G935T using Tapatalk
So you went back with the double step set up?
Also, did switching the prongs help your high beam issues?
Yaris874Nahant M.A · Mar 8, 2017#97 Originally Posted by
Kaotic Lazagna ↑ So you went back with the double step set up?
Also, did switching the prongs help your high beam issues?
I switch the prongs around an the other side star working so I think I need that plug with the relay I got it is on the way
Sent from my SM-G935T using Tapatalk
David CMontreal · Mar 4, 2018#98Update on the mini projector installation ?
ojeyskyNigeria · Jan 4, 2019#99 Originally Posted by
Yaris709 ↑ Just wondering if the newer type led's with the heat sink on back will work in the h4 yaris headlights? Since the h4's have that rubber seal around the back of the bulb. And a good bright reputable led if anyone knows what brand is good!
I recently purchased one of these and I am having a hard time fitting the rubber seals. Any suggestions?
2 attachments not included in this copy
IllusionXBrossard, QC · Jan 4, 2019#100 Originally Posted by
ojeysky ↑ I recently purchased one of these and I am having a hard time fitting the rubber seals. Any suggestions?
I had to cut the 4 nibbles out. You have to install the holder, out the rubber on and turn to lock the LED in place.
Sent from my CLT-L04 using Tapatalk