Kaotic LazagnaOriginal postCentral Valley, CA · Dec 24, 2016#1Ladies and gents, I'd like to introduce Dory. Finding Dory was long and difficult. I spent at least half a year looking for a new daily driver...just happened to be blue, so I thought "Dory" was a fitting name 😆. She's going to give Snow White some rest from daily driver duties. haha
Picture not included in this copy
She had a little under 21,200 miles on her when I picked her up a few days ago.
This pic was taken when I pulled into my insurance office.
Picture not included in this copy
After giving her a much needed vacuum and interior wipe down, I installed some pure white interior LEDs in the interior.
Picture not included in this copy
As mentioned, she's the new DD, so I won't be going crazy on the mods; but stay tuned, I do have some other stuff on the way. haha
Replies 291
scratchpaddyPhoenix · Dec 24, 2016#2Holy crap, it hasn't even been broken in yet! 😲 Is it an '07 or '08? Great color choice. 😁
Look at all that ground clearance! I bet this one won't get stuck at work. 😉
Kaotic LazagnaThread starterCentral Valley, CA · Dec 24, 2016#3 Originally Posted by
scratchpaddy ↑ Holy crap, it hasn't even been broken in yet! 😲 Is it an '07 or '08? Great color choice. 😁
Look at all that ground clearance! I bet this one won't get stuck at work. 😉
😆 😆 😆
I still have my Tein S.Tech springs from the Vios, so Dory will eventually be lower. Haha. Don't think enough to get stuck like Snow White. Hahaha
Dory is an '08 stick, btw.
Kaotic LazagnaThread starterCentral Valley, CA · Dec 24, 2016#4Miles are unbelievable, right!?
DabuuNo Bueno Park, CA · Dec 24, 2016#5Beautiful! Love the blue.
The wifey affectionately nicknamed ours Bailey. 😛
Kaotic LazagnaThread starterCentral Valley, CA · Dec 25, 2016#6 Originally Posted by
Dabuu ↑ Beautiful! Love the blue.
The wifey affectionately nicknamed ours Bailey. 😛
👍
Any reasoning behind "Bailey?"
Kaotic LazagnaThread starterCentral Valley, CA · Dec 25, 2016#7Installed white LEDs in the reverse lights. The OEM ones weren't good at all (worse than the FR-S, which I didn't think were possible).
Picture not included in this copy
Also installed LEDs in the parking lights and rear license plate light. Didn't bother taking pics of those tho.
Kaotic LazagnaThread starterCentral Valley, CA · Dec 25, 2016#8Installed this Sony HU this Christmas morning:
Picture not included in this copy
ern-dizCA all day · Dec 26, 2016#9Nice!! Kaotic back in a Yaris - too cool lol.
Kaotic LazagnaThread starterCentral Valley, CA · Dec 27, 2016#10 Originally Posted by
ern-diz ↑ Nice!! Kaotic back in a Yaris - too cool lol.
lol. Couldn't pass her up. I wiped off the coolant spray under the hood to see if the WP needs to be replaced, or was replaced but just never documented (would be the one maintenance that wasn't). So far, don't see the line.
yarisugiハワイ · Dec 27, 2016#11Wow. How were you able to find one with such low miles?!!
May I ask how much it was?
Kaotic LazagnaThread starterCentral Valley, CA · Dec 27, 2016#12 Originally Posted by
yarisugi ↑ Wow. How were you able to find one with such low miles?!!
May I ask how much it was?
Was looking for one for well over half a year. Ended up finding Dory 400 miles away from me. 😆
She was $5k, which, in my eyes, was one helluva deal! 👍
scratchpaddyPhoenix · Dec 27, 2016#13It took me three months to find mine, almost identical to yours, cheaper, but way higher miles. Yours is a steal! Especially in California. Great job finding it. Gotta love those low gas prices. Everybody "needs something bigger" all of the sudden. 🙄
Kaotic LazagnaThread starterCentral Valley, CA · Jan 9, 2017#14Installed VLEDs HVA LEDs in the rear turn signals. OEM on the left, VLEDs on the right for comparison.
Picture not included in this copy
ern-dizCA all day · Jan 9, 2017#15Nice
DabuuNo Bueno Park, CA · Jan 9, 2017#16 Originally Posted by
Kaotic Lazagna ↑ 👍
Any reasoning behind "Bailey?"
No reason, just that she loves Bailey from the movie. 😆
Love the lighting mods!
ern-dizCA all day · Jan 10, 2017#17lol my sister named her new Audi, Bailey.
Kaotic LazagnaThread starterCentral Valley, CA · Jan 19, 2017#18Dory gets to breathe better now.
Picture not included in this copy
ern-dizCA all day · Jan 19, 2017#19Nice. I still trip out on how I actually felt an improvement with the K&N - but not until the ECU was reset.
Kaotic LazagnaThread starterCentral Valley, CA · Jan 19, 2017#20 Originally Posted by
ern-diz ↑ Nice. I still trip out on how I actually felt an improvement with the K&N - but not until the ECU was reset.
I didn't really feel a difference when I did it in the Vios. I felt a big difference when I got the K&N Typhoon intake for it. I didn't feel like dropping that kind of cash for Dory tho. I'll go to Home Depot tomorrow to see if I can find any tubing that's the same diameter as the inlet hole for the snorkel/silencer tube. That way I can plumb it to get fresh, cooler air.
Funny thing is with the FR-S, I felt a negative difference with a SRI. Loss of power, loss of driveability, bogging down. Went back to the K&N drop in for it (which I felt a positive difference from the OEM filter).
Kaotic LazagnaThread starterCentral Valley, CA · Jan 19, 2017#21ern-dizCA all day · Jan 19, 2017#22How interesting.
Kaotic LazagnaThread starterCentral Valley, CA · Jan 20, 2017#23 Originally Posted by
ern-diz ↑ How interesting.
Yeah, I guess the FR-S intake is pretty efficient and optimized. It has a duct that leads to the front bumper to pull in fresh/cooler air. There's not much restriction in the intake system either, so a drop in filter is all you really need for the FR-S unless you want to get rid of the intake noise generator and/or dress up the engine bay.
For me, it just wasn't worth it. I don't drive in the top end very much, so any "gains" that an aftermarket intake could potentially give in the FR-S wasn't worth the sacrifice of abysmal low end performance. With the stock intake, bumper to bumper traffic is manageable, and flooring it from a standstill is possible. With that Injen SRI, bumper to bumper was horrible because of the heat soak (engine would almost stall out). Flooring it from a standstill was impossible. Engine revs, but then would bog down and car wouldn't accelerate, just bucks. Totally not safe in an emergency situation.
ern-dizCA all day · Jan 20, 2017#24 Originally Posted by
Kaotic Lazagna ↑ Totally not safe in an emergency situation.
I can see how it wouldn't be.
Kaotic LazagnaThread starterCentral Valley, CA · Jan 20, 2017#25Replaced the RC car antenna with an OEM Honda 7" antenna.
Picture not included in this copy
I could not find any plastic ducting though. I'll have to keep looking for that (especially for the same diameter as the silencer tube).
malibuguyWestminster, MD · Jan 21, 2017#26 Originally Posted by
Kaotic Lazagna ↑ I didn't really feel a difference when I did it in the Vios. I felt a big difference when I got the K&N Typhoon intake for it. I didn't feel like dropping that kind of cash for Dory tho. I'll go to Home Depot tomorrow to see if I can find any tubing that's the same diameter as the inlet hole for the snorkel/silencer tube. That way I can plumb it to get fresh, cooler air.
Funny thing is with the FR-S, I felt a negative difference with a SRI. Loss of power, loss of driveability, bogging down. Went back to the K&N drop in for it (which I felt a positive difference from the OEM filter).
A 3" silicone intake coupler clamps right on the snorkle dick sticking out of the airbox. Look at the passenger side of the radiator/core support...there is a filler panel with a spot thats money for a high pressure outside air feed (kinda like whats stock on an Gt86)
Also did you remove the carbon trap out of the air lid yet?
Kaotic LazagnaThread starterCentral Valley, CA · Jan 21, 2017#27 Originally Posted by
malibuguy ↑ A 3" silicone intake coupler clamps right on the snorkle dick sticking out of the airbox. Look at the passenger side of the radiator/core support...there is a filler panel with a spot thats money for a high pressure outside air feed (kinda like whats stock on an Gt86)
Also did you remove the carbon trap out of the air lid yet?
I popped the hydrocarbon trap out. I removed the silencer tube. I would want the duct to have the least amount of bends in it, so I was just thinking of routing it from the opening left behind by removing the silencer tube, down towards the ground near the splash guard. Do you think it'll be more beneficial to route it from the opening along the radiator fan, and do the passenger side of the radiator support you mentioned?
malibuguyWestminster, MD · Jan 21, 2017#28High pressure air is better then low pressure. You can probably pull it off with mainly a 90* bend to face forward. I think its pretty much a straight shot past the fans. But then you must consider possibly using reflective heat wrap to help with the heat coming off the radiator.
Its something Ive always wanted to try and just never got to.
I used to run a 'hot air' duct that took air off the exhaust side to help reclaim lost MPG during the winter. Killed power but hey 50+ during winter on winter fuel
Thats how I know the 3" clamps on lol
Kaotic LazagnaThread starterCentral Valley, CA · Jan 21, 2017#29 Originally Posted by
malibuguy ↑ High pressure air is better then low pressure. You can probably pull it off with mainly a 90* bend to face forward. I think its pretty much a straight shot past the fans. But then you must consider possibly using reflective heat wrap to help with the heat coming off the radiator.
Its something Ive always wanted to try and just never got to.
I used to run a 'hot air' duct that took air off the exhaust side to help reclaim lost MPG during the winter. Killed power but hey 50+ during winter on winter fuel
Thats how I know the 3" clamps on lol
Dang, 50 mpg!? I'm getting 39-41 mpg right now (that's with traffic everyday and rain).
Considering I sit in stop and go traffic on pretty much a daily basis, I don't want to have to deal with heat soaking (which was what I was afraid of in your idea). Plus, I won't be using the snorkel at all. Right now, I'm fine with the opening by itself since it's been cold lately, but once warmer temps start again, I must have that opening filled with the ducting work.
Are there any high pressure areas on the driver's side? How can you find out where high pressure areas are at anyway?
malibuguyWestminster, MD · Jan 21, 2017#30Basically any source of air from ahead of the radiator/condenser. About 1/4 of the surface area of the heat exchangers actually flow air...so all that extra air needs to go somewhere. This is where most OEMs source outside higher pressure air to aid in performance
Kaotic LazagnaThread starterCentral Valley, CA · Jan 21, 2017#31 Originally Posted by
malibuguy ↑ Basically any source of air from ahead of the radiator/condenser. About 1/4 of the surface area of the heat exchangers actually flow air...so all that extra air needs to go somewhere. This is where most OEMs source outside higher pressure air to aid in performance
So if I can some how route the ducting to the side, bottom, or top of the radiator, it should be sufficient? I saw an article online about how on an NA gen Miata, there was a good duct placement at the cowl. I don't think the Yaris has any space near the cowl tho.
malibuguyWestminster, MD · Jan 22, 2017#32Yeah same pricipal. We do not have a cowl quite like them.
Ive seen FiST cars with a cowl intake...maybe Ill take a look at mine tomorrow and see if thats feasible.
But yeah a path with direct access to air ahead of the radiators will do the job
Kaotic LazagnaThread starterCentral Valley, CA · Jan 22, 2017#33 Originally Posted by
malibuguy ↑ Yeah same pricipal. We do not have a cowl quite like them.
Ive seen FiST cars with a cowl intake...maybe Ill take a look at mine tomorrow and see if thats feasible.
But yeah a path with direct access to air ahead of the radiators will do the job
FiST cars?
I'll have to take a look around the radiator on the driver side to see where the best access would be.
But first thing's first, didn't realize the OEM battery in the FR-S is weak, so after not driving it for 9 to 10 days, I went to start it and was denied (lol). So I gotta a find a jumper pack (don't own one and no longer have cables).
DabuuNo Bueno Park, CA · Jan 22, 2017#34Fiesta ST.
Yay, I contributed. :P
malibuguyWestminster, MD · Jan 22, 2017#35You sir have a bad battery or a draw. 10days a healthy battery shouldnt even bat an eye to start a car. Its not a diesel semi truck in -20 westher
Kaotic LazagnaThread starterCentral Valley, CA · Jan 22, 2017#36 Originally Posted by
malibuguy ↑ You sir have a bad battery or a draw. 10days a healthy battery shouldnt even bat an eye to start a car. Its not a diesel semi truck in -20 westher
Good ol Subaru to thank for since they're the ones that made the FRS. Other owners experience the same thing, and my friend who is a service advisor for a Subaru dealership said he sees it all the time there since Subaru uses weak batteries in relation to their cars electrical system. I just gotta drive it once a week at least.
Kaotic LazagnaThread starterCentral Valley, CA · Jan 22, 2017#37 Originally Posted by
Dabuu ↑ Fiesta ST.
Yay, I contributed. :P
Lol. Thanks for the answer.
Kaotic LazagnaThread starterCentral Valley, CA · Jan 23, 2017#38 Originally Posted by
malibuguy ↑ Yeah same pricipal. We do not have a cowl quite like them.
Ive seen FiST cars with a cowl intake...maybe Ill take a look at mine tomorrow and see if thats feasible.
But yeah a path with direct access to air ahead of the radiators will do the job
So I tried looking, there's really no way to get in front of the radiator. I might be forced to pop off the driver side fog light cover and route the ducting to that opening. I'm thinking that should be a high pressure zone anyway since many people use that location on cars for brake cooling.
Kaotic LazagnaThread starterCentral Valley, CA · Feb 21, 2017#39Update.
Installed the Tein S.Tech springs I had left over from the Vios.
Picture not included in this copy
Also installed replica RS taillights and Tanabe axle-back.
Picture not included in this copy
Since I couldn't use the VLEDs HVA bulbs in the RS tails, I moved them to the front.
Picture not included in this copy
Also removed the towing harness from the car, so the front end looks better and no extra, unneeded wiring going from the front to the rear.
scratchpaddyPhoenix · Feb 21, 2017#40Looks goofy with the lowered stance and stock hubcaps. Especially if you started at the back, saw the low bumper, nice exhaust and taillights, and... wait a minute... 😆
I definitely like the exterior of the '08 and '07 hatchbacks over the refresh they did in '09. The changes are subtle, but I don't think for the better. I like the post-refresh interior changes, though.
Kaotic LazagnaThread starterCentral Valley, CA · Feb 22, 2017#41 Originally Posted by
scratchpaddy ↑ Looks goofy with the lowered stance and stock hubcaps. Especially if you started at the back, saw the low bumper, nice exhaust and taillights, and... wait a minute... 😆
I definitely like the exterior of the '08 and '07 hatchbacks over the refresh they did in '09. The changes are subtle, but I don't think for the better. I like the post-refresh interior changes, though.
Would that count as a neck breaker if they turned their head to do a double take because of the hub caps? LOL
It's the daily driver. lol. I'll eventually get wheels, just waiting for a sale or some deal. I'll run down these tires first, and get wheels and tires at the same time. I'm thinking 15x8 949Racing 6UL in tungsten would look nice. I'd like the set up to be near or even lighter than the OEM steelies and tires.
I prefer the zenki years too. I like the interior of the new Yaris, but their seats, imo, are terrible. Can't sit in one for more than 5 minutes.
DabuuNo Bueno Park, CA · Feb 22, 2017#42Looking good!
I love 949racing wheels. I wish they still made their 15x7 +42, super light for a decent price.
scratchpaddyPhoenix · Feb 22, 2017#43I don't think the steelies and hubcaps look bad. It's just not what I'm used to seeing on a lowered car. It seems like most people start with the wheels, then move on to exhaust, springs, etc.
I was only talking about the '09 refresh, with the little horizontal strips at the corners of the bumpers, different grille, nicer HVAC knobs, and different fabric on otherwise identical seats. I don't think most people even notice the differences.
ern-dizCA all day · Feb 22, 2017#44If I had to do it over again, I would have lowered before getting wheels. In hindsight, it was a more satisfying mod.
Kaotic LazagnaThread starterCentral Valley, CA · Feb 22, 2017#45It's usually best to lower the car first and then get wheels. I say this because if you get wheels and then lower it, you might have clearance issues. If you lower first, you can research the wheel specs to get the fitment you want.
Kaotic LazagnaThread starterCentral Valley, CA · Feb 22, 2017#46 Originally Posted by
Dabuu ↑ Looking good!
I love 949racing wheels. I wish they still made their 15x7 +42, super light for a decent price.
Yeah, only Miata specs now for 15x7. They still have a 15x6 tho. 😆
Originally Posted by
scratchpaddy ↑ I don't think the steelies and hubcaps look bad. It's just not what I'm used to seeing on a lowered car. It seems like most people start with the wheels, then move on to exhaust, springs, etc.
I was only talking about the '09 refresh, with the little horizontal strips at the corners of the bumpers, different grille, nicer HVAC knobs, and different fabric on otherwise identical seats. I don't think most people even notice the differences.
Ah, I'll have to look at the knobs the next time I'm in a kouki. I do like how they got a tach 😆
scratchpaddyPhoenix · Feb 22, 2017#47I've never heard of this zenki/kouki thing. Had to look it up. Very cool, now I know.
I'm not sure who got a tach. My '09 certainly didn't. 🙁 The kouki HVAC knobs are knurled instead of ribbed, which I like better. They also have amber backlighting instead of green.
Picture not included in this copy Picture not included in this copy
Picture not included in this copy Picture not included in this copy
Picture not included in this copy Picture not included in this copy
I think the Yaris became about 3% more bland in 2009. 😆
ern-dizCA all day · Feb 22, 2017#48 Originally Posted by
scratchpaddy ↑ I think the Yaris became about 3% more bland in 2009. 😆
Man, after reviewing the pics side-by-side the way you presented them, this is such a great statement lmao.
KalispelArizona (USA) · Feb 22, 2017#49 I like the interior of the new Yaris, but their seats, imo, are terrible. Can't sit in one for more than 5 minutes.
You have to opt for the SE trim for the good seats (among other things). Very comfortable! 👍
Kaotic LazagnaThread starterCentral Valley, CA · Feb 22, 2017#50 Originally Posted by
scratchpaddy ↑ I've never heard of this zenki/kouki thing. Had to look it up. Very cool, now I know.
I'm not sure who got a tach. My '09 certainly didn't. 🙁 The kouki HVAC knobs are knurled instead of ribbed, which I like better. They also have amber backlighting instead of green.
Picture not included in this copy Picture not included in this copy
Picture not included in this copy Picture not included in this copy
Picture not included in this copy Picture not included in this copy
I think the Yaris became about 3% more bland in 2009. 😆
Yeah, I learned about the "zenki" and "kouki" terminology way back when I was interested in S13 240SX's.
I actually like the ribbed knobs better than the knurled style. Although the knurled ones are probably more grippy. I'm not a fan of the blue dotted fabric of the zenki, and would prefer the kouki seats (more like the sedan seats).