Yarisworld Archive

Finding Dory

292 posts · 180,830 views · page 3 of 6

Replies continued

Kaotic LazagnaThread starterCentral Valley, CA · Jun 18, 2017#101
Originally Posted by Kalispel ↑
I usually don't like the design of virtually any aftermarket wheels that I have seen for sale in the USA, but I have to admit those (Sparco TROFEO 4) look good 👍 on your Yaris, minus the rectangular company lettering plastered the very outer rims. Much nicer wheel stance at 37mm offset (16 in version). I would be tempted to spring for the slightly altered Sparco TROFEO 5 design on mine (in Light Grey), which I prefer a bit over the TROFEO 4 design, but they aren't available for the Yaris (I assume due to the integrated 5-lug only type design) - go figure. 😆

Picture not included in this copy

Versus

Picture not included in this copy

I had hoped that the stickers would be optionally placed on the wheels, but unfortunately they're not. That's the one thing that bothered me about the Trofeo 4.

I do like split 5-spoke designs, actually got the WedsSport TC105N on my FR-S.

Picture not included in this copy

But I don't think they would pair too well with a 4-lug pattern unless the hub portion was recessed in like in the various wheels I had on my previous Yaris (like how the TC105N are above).

Picture not included in this copy


Otherwise, they impose on the design like so (another set of split 5-spoke I had):

Picture not included in this copy
Kaotic LazagnaThread starterCentral Valley, CA · Jun 20, 2017#102
Picture not included in this copy


Finally can have some clean, filtered air in Dory. My interior shouldn't get as dusty and linty as quickly now.

Also got her a 100w Bazooka bass tube. I'll install that once I get a HU for her (the Sony I posted in the first page was returned due to its craptastic performance in every aspect).
ABSPLASTICCALIFORNIA · Jun 20, 2017#103
Woo!
Kaotic LazagnaThread starterCentral Valley, CA · Jun 20, 2017#104
Originally Posted by ABSPLASTIC ↑
Woo!
👍
heeroyuy01195Florida · Jun 22, 2017#105
Is it just me, or does anyone else think the pattern on that air filter looks like it would make a good paint scheme on a Yaris? lol
ern-dizCA all day · Jun 22, 2017#106
Originally Posted by heeroyuy01195 ↑
Is it just me, or does anyone else think the pattern on that air filter looks like it would make a good paint scheme on a Yaris? lol
That would be just you lol jk.

On a related note, that new honeycomb carbon fiber I'm starting to see is pretty interesting, but I doubt it'll have the staying power that the traditional CF weave does.
Kaotic LazagnaThread starterCentral Valley, CA · Jun 22, 2017#107
Originally Posted by heeroyuy01195 ↑
Is it just me, or does anyone else think the pattern on that air filter looks like it would make a good paint scheme on a Yaris? lol
You may be alone on that one. lol. =P


Originally Posted by ern-diz ↑
That would be just you lol jk.

On a related note, that new honeycomb carbon fiber I'm starting to see is pretty interesting, but I doubt it'll have the staying power that the traditional CF weave does.
I think that type of CF weave is one of the stronger patterns.

http://www.carbon.ee/en/n/carbon-fib...erns-explained
ern-dizCA all day · Jun 22, 2017#108
Wow; who knew there were so many.
heeroyuy01195Florida · Jun 23, 2017#109
Aww shucks nobody liked the air filter look on their car :( lol

There's tons of different weave patterns for composites for various applications. Each has a strength and weakness. When I was making the hull for my engineering project many moons ago when I was still in college, we stuck with what was cheap vs. what was actually good for our application due to budgets. Would have been nice to play with some basalt fiber on that project.
ern-dizCA all day · Jun 23, 2017#110
Originally Posted by heeroyuy01195 ↑
Aww shucks nobody liked the air filter look on their car :( lol

There's tons of different weave patterns for composites for various applications. Each has a strength and weakness. When I was making the hull for my engineering project many moons ago when I was still in college, we stuck with what was cheap vs. what was actually good for our application due to budgets. Would have been nice to play with some basalt fiber on that project.
Don't get me wrong, I can totally see a hydrodip in that pattern. Maybe a valve cover done in that style. It's definitely a personal preference thing, so no right or wrong answer, or disrespect intended.

I would absolutely rock a wrap in that color and pattern over some of the wraps I've seen out there 🙄
heeroyuy01195Florida · Jun 23, 2017#111
Originally Posted by ern-diz ↑
Don't get me wrong, I can totally see a hydrodip in that pattern. Maybe a valve cover done in that style. It's definitely a personal preference thing, so no right or wrong answer, or disrespect intended.

I would absolutely rock a wrap in that color and pattern over some of the wraps I've seen out there 🙄
No offence taken, I personally wouldn't wrap my whole car in that pattern but I would do a valve cover or something like you said lol. Maybe if it was a drift car where crazy/ridiculous, over the top stuff is common...
Kaotic LazagnaThread starterCentral Valley, CA · Jun 23, 2017#112
Yup lots of weaves, but I have only seen the simple weaves for the automotive world.
scratchpaddyPhoenix · Jun 24, 2017#113
Well, carbon fiber body panels replace metal that's slightly stronger than aluminum foil, so it doesn't have to be all that strong. 🤣
heeroyuy01195Florida · Jun 24, 2017#114
Originally Posted by scratchpaddy ↑
Well, carbon fiber body panels replace metal that's slightly stronger than aluminum foil, so it doesn't have to be all that strong. 🤣
So true!😆
Kaotic LazagnaThread starterCentral Valley, CA · Jul 6, 2017#115
New head unit is in. Really good one with a lot of features for it's price point. I would have also had the Bazooka basstube (100w) in as well if Bazooka didn't forget to put in the FAST-9999 harness that was supposed to come with it.

Picture not included in this copy
bradbowlHawaii · Jul 6, 2017#116
Originally Posted by Kaotic Lazagna ↑
New head unit is in. Really good one with a lot of features for it's price point. I would have also had the Bazooka basstube (100w) in as well if Bazooka didn't forget to put in the FAST-9999 harness that was supposed to come with it.
Wow, I love all the work you've done and I absolutely love the Blazing Blue! I'm going to follow this thread and may ask you for some tips when I finally find a Yaris similar to yours. :) I've been looking for a Yaris like this for awhile now in Hawaii and actually flew to the Bay Area to buy one at a dealership to ship back home, but it didn't work out.

Awesome job!
heeroyuy01195Florida · Jul 6, 2017#117
Originally Posted by Kaotic Lazagna ↑
New head unit is in. Really good one with a lot of features for it's price point. I would have also had the Bazooka basstube (100w) in as well if Bazooka didn't forget to put in the FAST-9999 harness that was supposed to come with it.
🎉 Looking good! I had an 80w tube in mine that mysteriously started blowing fuses. Curious to see how the 100w does in the little hatch. Keep us posted!
ern-dizCA all day · Jul 6, 2017#118
Android head unit, very nice.
Kaotic LazagnaThread starterCentral Valley, CA · Jul 6, 2017#119
Originally Posted by bradbowl ↑
Wow, I love all the work you've done and I absolutely love the Blazing Blue! I'm going to follow this thread and may ask you for some tips when I finally find a Yaris similar to yours. :) I've been looking for a Yaris like this for awhile now in Hawaii and actually flew to the Bay Area to buy one at a dealership to ship back home, but it didn't work out.

Awesome job!
Thanks! A blazing blue hatchback was what I originally wanted when I got my first Yaris and intended on getting one new back in 2006. Went into a dealership and saw a flint mica Yaris sedan, and took it home. lol.

So it's funny that after spending over 6 months looking for a good used Yaris, that it's the one that I found. I drove all the way down to SoCal to get her.

As long as you don't finance it, you should be able to ship back a car to Hawaii. Check SoCal's craigslist as well, never know, might find one like I did.



Originally Posted by heeroyuy01195 ↑
🎉 Looking good! I had an 80w tube in mine that mysteriously started blowing fuses. Curious to see how the 100w does in the little hatch. Keep us posted!
Will do. I have a 50w one in the FR-S that's thumping along. This 100w one should be fine as well since I won't have to turn up the gains as much. I'll set a LPF crossover on it as well (can't remember if it already has one).



Originally Posted by ern-diz ↑
Android head unit, very nice.
Doesn't do Android auto, but that wasn't a requirement for me anyway. It says it can control an Android phone, but I really don't know what the difference is.
kimonaHuntington Bch, CA · Jul 6, 2017#120
Nice install on the Kenwood. Looks good and fits perfectly.
bradbowlHawaii · Jul 6, 2017#121
Originally Posted by Kaotic Lazagna ↑
Thanks! A blazing blue hatchback was what I originally wanted when I got my first Yaris and intended on getting one new back in 2006. Went into a dealership and saw a flint mica Yaris sedan, and took it home. lol.
So clearly we were separated at birth! I pre-ordered a Blazing Blue hatchback with a six week wait time, but a Bayou Blue hatchback came in a couple weeks later, so I brought that one home instead. The impetuousness of youth.

Now that I'm 10 years wiser, that Blazing Blue hatchback will finally be mine someday. The long search will make it even sweeter!
ern-dizCA all day · Jul 6, 2017#122
Originally Posted by Kaotic Lazagna ↑
Doesn't do Android auto, but that wasn't a requirement for me anyway. It says it can control an Android phone, but I really don't know what the difference is.
Yeah, that wouldn't matter to me either. As long as I can pair my phone and run my apps from the radio, I wouldn't care that it wasn't native to the radio. If there are any benefits to android auto running native on the radio, aside from not having to sync your phone to it, I'm unaware of them.
Kaotic LazagnaThread starterCentral Valley, CA · Jul 7, 2017#123
Originally Posted by kimona ↑
Nice install on the Kenwood. Looks good and fits perfectly.
There's a slight gap at the top and bottom of the HU, but not enough to make me go crazy. lol.


Originally Posted by ern-diz ↑
Yeah, that wouldn't matter to me either. As long as I can pair my phone and run my apps from the radio, I wouldn't care that it wasn't native to the radio. If there are any benefits to android auto running native on the radio, aside from not having to sync your phone to it, I'm unaware of them.
Yeah, then no use for me either. 😆


Originally Posted by bradbowl ↑
So clearly we were separated at birth! I pre-ordered a Blazing Blue hatchback with a six week wait time, but a Bayou Blue hatchback came in a couple weeks later, so I brought that one home instead. The impetuousness of youth.

Now that I'm 10 years wiser, that Blazing Blue hatchback will finally be mine someday. The long search will make it even sweeter!
lol, keep searching and you'll find a gem out there.
Kaotic LazagnaThread starterCentral Valley, CA · Jul 7, 2017#124
Dory's miles will increase considerably as my commute has gone from 30 miles to 60 miles each way.
bradbowlHawaii · Jul 7, 2017#125
Originally Posted by Kaotic Lazagna ↑
Dory's miles will increase considerably as my commute has gone from 30 miles to 60 miles each way.
You'll be well on our way to seeing hitting the 100,000 mile club in no time! :)

Seriously though, a 60 mile commute doesn't sound awesome. That'll mean less time to work on Dory. :(
zoidberg444Birmingham, UK · Jul 7, 2017#126
Originally Posted by bradbowl ↑
You'll be well on our way to seeing hitting the 100,000 mile club in no time! :)

Seriously though, a 60 mile commute doesn't sound awesome. That'll mean less time to work on Dory. :(
Poor Dory. 😣

I'm putting 86 miles a day on mine. Until 3 months ago i was doing 100-200 miles a day.

Sent from my SM-G930F using Tapatalk
Kaotic LazagnaThread starterCentral Valley, CA · Jul 7, 2017#127
Originally Posted by bradbowl ↑
You'll be well on our way to seeing hitting the 100,000 mile club in no time! :)

Seriously though, a 60 mile commute doesn't sound awesome. That'll mean less time to work on Dory. :(
Yeah, I'll hit 100k in the next two years. My days off are the only time I work on my cars anyway. lol. Not looking forward to the spark plug change on the FR-S.


Originally Posted by zoidberg444 ↑
Poor Dory. 😣

I'm putting 86 miles a day on mine. Until 3 months ago i was doing 100-200 miles a day.

Sent from my SM-G930F using Tapatalk
200 miles a day!? Jeez!
Kaotic LazagnaThread starterCentral Valley, CA · Jul 11, 2017#128
Had some left over points from Toyota before I resigned, so ordered these. They have some weight to them, just concerned because of the brand. Lol

Picture not included in this copy
scratchpaddyPhoenix · Jul 11, 2017#129
Originally Posted by Kaotic Lazagna ↑
Not looking forward to the spark plug change on the FR-S.
Picture not included in this copy
Kaotic LazagnaThread starterCentral Valley, CA · Jul 12, 2017#130
Originally Posted by scratchpaddy ↑
Picture not included in this copy
🤣
Kaotic LazagnaThread starterCentral Valley, CA · Jul 12, 2017#131
Cut out the factory speakers:
Picture not included in this copy

And installed (before and after):
Picture not included in this copy
bradbowlHawaii · Jul 12, 2017#132
Originally Posted by Kaotic Lazagna ↑
Cut out the factory speakers
Pardon my lack of knowledge, but since I would like to do this as well, I have a few questions.

1. It appears that the stock speakers don't attach with screws but actually need to be cut out of a speaker holder?

2. How did you attach the new speakers to the speaker hole? Did your speakers come with that black circular mounting bracket?

3. Did you run new speaker wires to the head unit?

I've seen a few threads on how to remove the door panels so that seems not too bad. Thanks for your input! I love seeing all your progress. 👍
Kaotic LazagnaThread starterCentral Valley, CA · Jul 12, 2017#133
Originally Posted by bradbowl ↑
Pardon my lack of knowledge, but since I would like to do this as well, I have a few questions.

1. It appears that the stock speakers don't attach with screws but actually need to be cut out of a speaker holder?

2. How did you attach the new speakers to the speaker hole? Did your speakers come with that black circular mounting bracket?

3. Did you run new speaker wires to the head unit?

I've seen a few threads on how to remove the door panels so that seems not too bad. Thanks for your input! I love seeing all your progress. 👍
Yeah, removing the door is pretty easy.

1. Pop off the arm rest panel.
2. Pop off the middle panel that has the switches and disconnect switches.
3. Pop off the panel above that panel.
4. Pop off a small black plastic piece at the front of the door panel (kinda hard to remove, I used a wide flat head screw driver and gently popped it off, wrap the tip with electrical tape to help prevent damaging the plastics).
5. Remove the screw at the door handle.
6. Remove the three screws under panels from step 1 and 2.
7. Starting from the bottom, pop off the door panel and work your way up.
8. Lift up and remove the door panel (gotta unhook the door handle and door lock).

Removing the speaker is straight forward too if you don't plan on reusing the factory speakers.
1. Disconnect the wire harness from the speaker.
2. With a hobby/xacto knife, cut out the factory paper speakers (I cut them out at the surrounds).
3. Snip the plastic pieces holding the speaker onto the bracket.
4. Pulled off the factory wires from the speaker. It takes some finessing, but it'll come off. Remove any blue sealant from the solder (provided there are still solder on the wire after ripping it off the speaker).
5. Remove the wire from the black holder to free them.
6. Hold up the new speaker onto the factory mounting bracket and center it.
7. Using a Sharpie, dot onto the foam piece where the screws will go through.
8. With the new speaker out, use the xacto knife to make a pilot hole through the foam and onto the gray plastic piece.
9. Using the screws provided with the new speaker, screw in and remove from pilot holes.
10. Attach the wires to the speaker. I shortened mine and attached butt connectors to the ends.
11. Connect the butt connectors to the appropriate factory wires. Follow the colors to see which wire is which.
LF Speaker: pink-, purple+
RF Speaker: gray-, blue+
10. If your speaker has a screw mount, slip it over the foam and plastic mount.
11. Hold the new speaker into place and carefully screw it onto the foam/gray mount.
12. Plug the wire connector back in and test the speakers to make sure they are working before putting everything back together.
Kaotic LazagnaThread starterCentral Valley, CA · Jul 12, 2017#134
This one I cut out where the cone meets the surrounds, but it's more difficult, so the other side I cut it out at the surrounds.
Picture not included in this copy
bradbowlHawaii · Jul 12, 2017#135
Wow, thanks so much for the detailed walkthrough!

Can we expect to see pictures of new rear speakers soon? ;D

Maybe lose the spare tire and put a sub in there (like the GTI's soundbox sub)?
Kaotic LazagnaThread starterCentral Valley, CA · Jul 12, 2017#136
Originally Posted by bradbowl ↑
Wow, thanks so much for the detailed walkthrough!

Can we expect to see pictures of new rear speakers soon? ;D

Maybe lose the spare tire and put a sub in there (like the GTI's soundbox sub)?
Since Dory is my "beater car," I'm not really looking to spend money if I don't have to...I know, I know, I bought the Kenwood HU and the wheels and tires, but there was a reason for those. I needed USB connection to play music and BT for safety. I had to replace the tires because the factory tires were coming off in chunks (might as well replace the wheels, lol).

I got these CV speakers for free, as well as the Bazooka bass tube, from my previous employment (recently resigned there). I even got the other Bazooka bass tube for the FR-S for free there as well. Items were bought using points earned (don't want anyone thinking I stole them). So, unless the rear speakers blow out, I will not be replacing them. I have the HU set so that the rear speakers aren't producing any low ends, only mids and highs. I have the HPF set to like 150hz and at a 12dB/octave slope. So I don't foresee them blowing anytime soon. lol. I have the front speakers set to 60hz HPF at 18dB/octave slope.

I'm just waiting for Bazooka to send me the FAST-9999 harness that was supposed to be in the box, and then I'll have some nice lows. 👍
Kaotic LazagnaThread starterCentral Valley, CA · Jul 12, 2017#137
Oh, and the only wires I ran to the HU were the Bazooka FAST-BTAH RCAs to the sub outputs.
bradbowlHawaii · Jul 13, 2017#138
Originally Posted by Kaotic Lazagna ↑
Dory is my "beater car"
Bro, your beater car is 100x nicer than my daily driver. Haha! 😆

It's cool that you're able to make great upgrades to Dory on the cheap. I guess that means we won't be seeing you install a turbo like in the YouTube videos of various Yarii that I've been watching. From the sound of how talented you are with a wrench, I bet you could do it too. :)
Kaotic LazagnaThread starterCentral Valley, CA · Jul 13, 2017#139
Originally Posted by bradbowl ↑
Bro, your beater car is 100x nicer than my daily driver. Haha! 😆

It's cool that you're able to make great upgrades to Dory on the cheap. I guess that means we won't be seeing you install a turbo like in the YouTube videos of various Yarii that I've been watching. From the sound of how talented you are with a wrench, I bet you could do it too. :)
lol, that's why I put "beater car" in quotes. I still treat her as if she's my only car.

If anyone's getting force fed, it'll be Snow White (FR-S). lol. She's on standby for now as the only mods I want to get some time in the future for her are front and side splitters, and rear diffuser. Those four pieces will cost around $1.5k though as I would get the Velox pieces (so they're both form and function).
Kaotic LazagnaThread starterCentral Valley, CA · Jul 13, 2017#140
The harness that should have come in the box finally arrived. So finally got to put in the Bazooka tube into the Yaris.

Picture not included in this copy
kimonaHuntington Bch, CA · Jul 13, 2017#141
^^^ What's it for?
Kaotic LazagnaThread starterCentral Valley, CA · Jul 13, 2017#142
Originally Posted by kimona ↑
^^^ What's it for?
It's a highly explosive rocket launcher. Lol. JK. It's an amplified ported 8 inch subwoofer. 😁
kimonaHuntington Bch, CA · Jul 13, 2017#143
^^^ I had to look that up on Wikipedia: "A subwoofer (or sub) is a woofer, or a complete loudspeaker, which is dedicated to the reproduction of low-pitched audio frequencies known as bass."

So, I guess that will make your car really "thump"?
Kaotic LazagnaThread starterCentral Valley, CA · Jul 13, 2017#144
Originally Posted by kimona ↑
^^^ I had to look that up on Wikipedia: "A subwoofer (or sub) is a woofer, or a complete loudspeaker, which is dedicated to the reproduction of low-pitched audio frequencies known as bass."

So, I guess that will make your car really "thump"?
They won't rattle windows or win any sound awards, but it's an all-in-one system that doesn't require any additional power cables through the firewall and is easy to disconnect for Costco runs. lol
kimonaHuntington Bch, CA · Jul 13, 2017#145
So, you can just unplug and remove it as necessary. That's cool.
Kaotic LazagnaThread starterCentral Valley, CA · Jul 13, 2017#146
Originally Posted by kimona ↑
So, you can just unplug and remove it as necessary. That's cool.
Yup. You can see the wire harness in the pic. Just unclip it, and out the tube goes. I did the same with the FR-S when it was my only car. It's not that heavy either, so you can just use one hand and grab it by the port and lift it out.

I recommend them if you don't need window rattling bass and/or you don't want to run a power cable through the firewall (only the 50w and 100w powered versions).
Kaotic LazagnaThread starterCentral Valley, CA · Aug 13, 2017#147
Installed a backup camera. Not bad for 12 bucks. lolololol. Gotta finish the install by connecting the reverse lead on the HU to that one wire in the fuse box.

Picture not included in this copy
bradbowlHawaii · Aug 17, 2017#148
^Awesome! Did you mount the camera by the license plate?
Kaotic LazagnaThread starterCentral Valley, CA · Aug 17, 2017#149
Originally Posted by bradbowl ↑
^Awesome! Did you mount the camera by the license plate?
Yup. I didn't feel like drilling any holes anywhere. Haha. Simple and easy way to install a BU can. Haha
kimonaHuntington Bch, CA · Aug 17, 2017#150
12 bucks? That's great!