CT_CJOriginal postEast Bumfrak CT · Mar 8, 2016#1Hey guys,
Since it worked out well before, I figured I'd ask here.
I am considering plastic dipping my hood. My paint is absolutely red, and chops from this last winter make it look speckled. I washed and waxed it every two weeks but at this point my hood is 2/3 red and 1/3 white.
Since I don't have a sprayer or any equipment I'm stuck with rattle can. Calling local body shops yields quotes in the 300-500 dollar range (before materials and tax)which seems excessive for such a small hood.
In leiu of buying paint in cans that will probably look like garbage/chip all over again, I was thinking plast dip, but a couple questions...
When it's time to remove, will it pull even more paint with it?
Anyone know offhand how close it is to 3po red (probably just buy a can and see myself)
How resistant have you guys found it? How well does it hold up at the car wash/to waxing. I wash/wax a every other week and try to use carnuba wax once a month.
Will gloss plastic dip or glossifier give a decent finish?
Thanks!
Replies 26
oxideWPG CAN · Mar 8, 2016#2Gloss officer might do the trick and maybe a clear bra to top it off as well
I plan on reprinting a couple parts in spring and hood will be one of them for sure
saraptexas · Mar 8, 2016#3If u do it, make sure you add significant amount of coats, the more coats the easier it peels off. We used to have customers bring in plasti dip cars, with very thin coats, making removal for body work a really big hassle. They now sell a gloss that can be applied over the initial plasti dip coats, it won't match of course considering how hard red is to match as it is, but yeah main key is to make sure you've layered on really good coverage and a lot of coats to help you when you want to remove it later on. I wouldn't really try and wax it, just clean it gently with soapy water and a nice sponge, Hope that helps
tmontagueCaledonia Ont. · Mar 8, 2016#4IMO, the glossifier will not make it look nearly as glossy as regular paint. This is based off experience using platidip. As stated above don't try and wax platidip just wash it and layer it on thick to make removal easier.
It isn't probably the most durable thing for hood protection and I don't think it will hold up as well as you think. The best solution would be to either paint it yourself, or pay extra and get a shop to paint it. Then install a clear vinyl like 3M Rock guard and replace that every couple years.
Just my $0.02
saraptexas · Mar 8, 2016#5On a side note, there is a new clear that is out for dips, it does anything and everything paint would do except for the fact that it's all removable, couple of high end dip shops here in Houston offer it, it's crazy because they did a gloss test and compared clear coats of a Porsche, bmw, and their product on the shop skyline, and the gloss put out a 94% gloss average over the factory "high end" OEM paints. It's even sand-able and buff-able ! Out of curiosity I got a price quote -____- 3200 !
Check them out on IG @hellawetdips @pearlsandpigments pretty neat stuff
saraptexas · Mar 8, 2016#6Sorry to go off topic, but here's a pic of it in action !
I'm in no way affiliated with them, or trying to purposely promote the shop, just the product haha
Picture not included in this copy oxideWPG CAN · Mar 8, 2016#7ooo hella wet
CT_CJThread starterEast Bumfrak CT · Mar 9, 2016#8Thanks for all the input. If I can't find a shop cheaper here I did find a brand new painted hood for a little less than the quotes I have.
That's awesome sarap. Too bad there aren't any dip shops here. Eastern Connecticut is a vacuous hole lol.
justjesusOrange County · Mar 9, 2016#9Other options:
- Find another red hood, and see if it's in better shape
- Dr. Colorchip to fill in the chips yourself. The kits range from like 29-69, or so.
QUESTIONS:
- why do you wax every two weeks?
-- what wax do you use for this?
- why do you wax with carnauba once a month?
-- hehe, what wax do you use for this?
edit: forgot to mention. I've seen videos on youtube showing plastidip taking some "abuse" in various ways, including off roading in a 4x4. Other videos showing it being pressure washed at a local coin-op
CT_CJThread starterEast Bumfrak CT · Mar 9, 2016#10I live in the rust belt area of the US and they use a ton of sand and salt. And a huge portion of vehicles in my area are large trucks that kick up alot of debris.
I tend to use Maguire's gold carnuba wax.
My previous car was an 88 mustang and washing/waxing like that kept the paint looking awesome, especially pushing 30 years old.
I thought about doctorchip or duplicolor, but I never have good results with rattle can paint, and with no garage I would end up with specks/debris in it.
tmontagueCaledonia Ont. · Mar 9, 2016#11If you're using wax primarily for protection and less about getting a "warm glow" then switch to synthetic wax aka paint sealer. Last long and is much more durable. I switched this past year and have been happy I did.
CT_CJThread starterEast Bumfrak CT · Mar 10, 2016#12Thanks. Honestly never heard of that before. I'll definitely try it.
RMcGNorth America · Aug 8, 2019#13 Originally Posted by
tmontague ↑ If you're using wax primarily for protection and less about getting a "warm glow" then switch to synthetic wax aka paint sealer. Last long and is much more durable. I switched this past year and have been happy I did.
tmontague,
This is an older post, but I am looking for solutions to protect the paint on my roof and a few other smaller horizontal areas where the clear coat is peeling. The color of my car is "Bayou Blue." Can you elaborate more about synthetic wax, why do you say AKA paint sealer? Is it chemically the same as or similar to paint sealer?
Do you think it would do well protecting the paint and underlying body on horizontal areas where the clear coat is peeling?
Any comments from you or others will be appreciated.
Thanks,
R.
tmontagueCaledonia Ont. · Aug 8, 2019#14Synthetic wax just tends to last longer and be more durable, it just lacks that warm glow you get with carnuba wax.
I now use ceramic coating as it lasts even longer and is much more durable than any wax. The prep takes longer but it is well worth it.
I am not sure if it will help on already peeling clear coat, but it will definitely help protect the clear coat that is still intact
06YarisRSFredericton, New Brunswick, Canada · Aug 9, 2019#15 Originally Posted by
RMcG ↑ tmontague,
This is an older post, but I am looking for solutions to protect the paint on my roof and a few other smaller horizontal areas where the clear coat is peeling. The color of my car is "Bayou Blue." Can you elaborate more about synthetic wax, why do you say AKA paint sealer? Is it chemically the same as or similar to paint sealer?
Do you think it would do well protecting the paint and underlying body on horizontal areas where the clear coat is peeling?
Any comments from you or others will be appreciated.
Thanks,
R.
I don't think that any wipe-on product is going to help with your issue. Doing decent repairs isn't that difficult. With spray bombs for your base coat and a catalyzed 2K clear coat like SprayMax a decent job can be achieved. You can feather the repair area into the panel, then clear the entire panel. I'll link you to some repairs I did before I decided to build a booth and paint my whole car. I did these repairs outside and it turned out pretty good. I did get a wee bit of stuff in the clear, but much of it will wetsand and polish out.
Here is a spray bomb of paint:
https://www.ebay.com/itm/For-Toyota-...-/252897489304 Touchups on my Yaris. The blending and clear coat starts at post #36:
Front Lip...Ordered one today (99 - 00 Civic) Booth building and full repaint:
Paint Booth for Full Respray RMcGNorth America · Aug 9, 2019#16 Originally Posted by
tmontague ↑ Synthetic wax just tends to last longer and be more durable, it just lacks that warm glow you get with carnuba wax.
I now use ceramic coating as it lasts even longer and is much more durable than any wax. The prep takes longer but it is well worth it.
I am not sure if it will help on already peeling clear coat, but it will definitely help protect the clear coat that is still intact
Thanks tmontague,
Do you think that ceramic coating (or synthetic wax) will protect underlying paint even if the clear coat has peeled off? Is there a particular brand of ceramic coating (or synthetic wax) that you (or others) prefer? (Some ceramic coatings are pretty expensive.)
My time is limited, so I may use ceramic coating or some other wipe on product for the time being, (like, e.g., a highly rated Consumer Reports wax like Nu-Finish or Meguiar's, the CR rating hopefully includes synthetic waxes) and then look into spray bombs for the base coat and a catalyzed 2K clear coat as recommended by 06YarisRS below for later.
R.
RMcGNorth America · Aug 9, 2019#17 Originally Posted by
06YarisRS ↑ I don't think that any wipe-on product is going to help with your issue. Doing decent repairs isn't that difficult. With spray bombs for your base coat and a catalyzed 2K clear coat like SprayMax a decent job can be achieved. You can feather the repair area into the panel, then clear the entire panel. I'll link you to some repairs I did before I decided to build a booth and paint my whole car. I did these repairs outside and it turned out pretty good. I did get a wee bit of stuff in the clear, but much of it will wetsand and polish out.
Here is a spray bomb of paint:
https://www.ebay.com/itm/For-Toyota-...-/252897489304 Touchups on my Yaris. The blending and clear coat starts at post #36:
Front Lip...Ordered one today (99 - 00 Civic) Booth building and full repaint:
Paint Booth for Full Respray
Thanks 06YarisRS,
Your links look quite interesting and the products do not look pricey. It looks like you did a panel outside, so that is of interest to me, since I do not have a garage. What kind of prep of the old peeling clear coat & paint is needed before putting on the base coat? The actual color of my Yaris is BAYOU BLUE/FB18. Is that color available in a spray bomb?
(I think the spray bomb link in your post is to a slightly different color than mine.)
Thanks,
R.
06YarisRSFredericton, New Brunswick, Canada · Aug 10, 2019#18 Originally Posted by
RMcG ↑ Thanks 06YarisRS,
Your links look quite interesting and the products do not look pricey. It looks like you did a panel outside, so that is of interest to me, since I do not have a garage. What kind of prep of the old peeling clear coat & paint is needed before putting on the base coat? The actual color of my Yaris is BAYOU BLUE/FB18. Is that color available in a spray bomb?
(I think the spray bomb link in your post is to a slightly different color than mine.)
Thanks,
R.
I would sand all of the peeling clearcoat away and a good inch or two into the good clearcoat. I would also apply a high build primer before the base coat. You'll want to sand with an absolute minimum of 400 - preferably 600 - before spraying the base coat. I would not use anything finer as you are looking for a good mechanical bond. No sanding of the base coat before clear coat and I would apply 3 - 4 coats of base (the first two should literally be dustings as this will help eliminate any adverse reactions between your primer and base) a few minutes apart and within 20 minutes, at least 3 coats of clear, maybe 10 minutes apart, depending on heat and humidity conditions at the time. Oh, an although I'm not a religious type, "cleanliness is next to godliness". Invest in some tack cloths to use between your primer and base, and base and clear. Degrease and tackcloth after sanding primer and tackcloth
only between base and clear
What would be most beneficial is if you took pics of all sections concerned and posted them here. That would give a much better idea of approach. I also have some tips that I will share with you if you do this; one of which is laying the metallic base coat in a uniform way with an orientation coat. Metallics look really bad if the flakes aren't evenly dispersed and uniformily oriented. It just too easy to get tiger stripes and blotches that become abundantly apparent, especially in the sunshine.
I could not find any reference to FB18, only Bayou Blue Metallic (8T1).
tmontagueCaledonia Ont. · Aug 10, 2019#19 Originally Posted by
RMcG ↑ Thanks tmontague,
Do you think that ceramic coating (or synthetic wax) will protect underlying paint even if the clear coat has peeled off? Is there a particular brand of ceramic coating (or synthetic wax) that you (or others) prefer? (Some ceramic coatings are pretty expensive.)
My time is limited, so I may use ceramic coating or some other wipe on product for the time being, (like, e.g., a highly rated Consumer Reports wax like Nu-Finish or Meguiar's, the CR rating hopefully includes synthetic waxes) and then look into spray bombs for the base coat and a catalyzed 2K clear coat as recommended by 06YarisRS below for later.
R.
It will definitely help protect what is under it but I don't know what it will look like in the end.
I have used CQuarts UK and I am a big fan of it
RMcGNorth America · Aug 11, 2019#20 Originally Posted by
06YarisRS ↑ I would sand all of the peeling clearcoat away and a good inch or two into the good clearcoat. I would also apply a high build primer before the base coat. You'll want to sand with an absolute minimum of 400 - preferably 600 - before spraying the base coat. I would not use anything finer as you are looking for a good mechanical bond. No sanding of the base coat before clear coat and I would apply 3 - 4 coats of base (the first two should literally be dustings as this will help eliminate any adverse reactions between your primer and base) a few minutes apart and within 20 minutes, at least 3 coats of clear, maybe 10 minutes apart, depending on heat and humidity conditions at the time. Oh, an although I'm not a religious type, "cleanliness is next to godliness". Invest in some tack cloths to use between your primer and base, and base and clear. Degrease and tackcloth after sanding primer and tackcloth only between base and clear
What would be most beneficial is if you took pics of all sections concerned and posted them here. That would give a much better idea of approach. I also have some tips that I will share with you if you do this; one of which is laying the metallic base coat in a uniform way with an orientation coat. Metallics look really bad if the flakes aren't evenly dispersed and uniformily oriented. It just too easy to get tiger stripes and blotches that become abundantly apparent, especially in the sunshine.
I could not find any reference to FB18, only Bayou Blue Metallic (8T1).
Thanks for your reply 06YarisRS,
I have attached pictures.
I figured out the Toyota Color code is 8T1, not FB18. As you can see, in addition to the extensive peeling of the clear coat, the car suffered some damage from a hail storm (some pock marks in the roof and a pock mark with a resulting crease & some rust in a panel over the front passenger window) that I feel I did not have the money to repair. This was the worst hailstorm I have ever experienced: it was like somebody swinging a ball-peen hammer with both hands as hard as they could each time a hail stone hit. It's a wonder it did not do more damage.
Any comments from 06YarisRS or anybody else are would be welcomed.
(
P.S. : I have used the convention that "left" and "right"
for the vehicle refer to the same left and right of a driver sitting in the car for the titles of the photos, but that may not be relevant, since the titles don't seem to have come through on uploading the photos.)
Thanks,
R.
14 attachments not included in this copy
RMcGNorth America · Aug 11, 2019#21 Originally Posted by
tmontague ↑ It will definitely help protect what is under it but I don't know what it will look like in the end.
I have used CQuarts UK and I am a big fan of it
Thanks tmontague,
I have included photos in another post in this thread. For the time being, I may just want to protect the paint as much as possible over the upcoming winter and not worry about appearance for now. And then try for a more long term solution, like the one advocated by others, like DIY painting/DIY clear coating or DIY plasti-dipping. I really don't have the money, nor the inclination to spend on a professional paint or clear coat job.
Thanks again,
R.
06YarisRSFredericton, New Brunswick, Canada · Aug 11, 2019#22Well, it's definitely repairable albiet a little more extensive than I had expected. The roof would have to be completely repainted, but you have natural boundary lines there and, because it's essentially perpendicular to the other panels, a slight difference in color/texture would be less noticeable. You would probably want to feather the paint down into the A-pillar a bit. The liftgate would likely have to be blended into the rear quarter panels a bit with some feathering of the base coat. But, you might get away with painting just the liftgate. I guess it all depends on the quality of job you're looking for. Removing all the bits and pieces on the liftgate is pretty easy and you'd certainly want to do that.
Is there any chance that a friend/relative has a garage that you could do this in? You wouldn't need a full booth, just somewhere out of the wind, given the size of the panels you're tackling. The roof is a very large area and would be highly susceptible to contamination.
You are going to need a fair bit of material for this job. I painted my entire car with about 1.5 - 2 quarts (including 50% reducer) of basecoat and about 1 gallon of clear coat.
I would buy at least three full size aerosol color-matched basecoat and likely 4 - 5 cans of the SprayMax, but you'd want to calculate a little more carefully.
BTW, my car too suffered what appeared to be hail damage. It was contained to the roof and there were 4 - 5 good sized pock marks. Since I was repainting the car anyway, I just filled them with bondo and sanded them nice and flat before priming.
RMcGNorth America · Aug 13, 2019#23 Originally Posted by
06YarisRS ↑ Well, it's definitely repairable albiet a little more extensive than I had expected. The roof would have to be completely repainted, but you have natural boundary lines there and, because it's essentially perpendicular to the other panels, a slight difference in color/texture would be less noticeable. You would probably want to feather the paint down into the A-pillar a bit. The liftgate would likely have to be blended into the rear quarter panels a bit with some feathering of the base coat. But, you might get away with painting just the liftgate. I guess it all depends on the quality of job you're looking for. Removing all the bits and pieces on the liftgate is pretty easy and you'd certainly want to do that.
Is there any chance that a friend/relative has a garage that you could do this in? You wouldn't need a full booth, just somewhere out of the wind, given the size of the panels you're tackling. The roof is a very large area and would be highly susceptible to contamination.
You are going to need a fair bit of material for this job. I painted my entire car with about 1.5 - 2 quarts (including 50% reducer) of basecoat and about 1 gallon of clear coat.
I would buy at least three full size aerosol color-matched basecoat and likely 4 - 5 cans of the SprayMax, but you'd want to calculate a little more carefully.
BTW, my car too suffered what appeared to be hail damage. It was contained to the roof and there were 4 - 5 good sized pock marks. Since I was repainting the car anyway, I just filled them with bondo and sanded them nice and flat before priming.
Thanks 06YarisRS,
Yes I do have a relative with a garage, so I may be able to talk them in to letting me use the garage. In order to try to understand better the requirements,
1) how long would a paint job take in your estimation? I suppose I could do it in increments, and not all at once.
In addition,
2) is there a temperature range I need to shoot for? I am presently in the Pacific Northwest of the US, so it generally does not get terribly hot or cold here, regardless of the season.
3) You mention sanding (above & in a previous post), would it be realistic to just hand sand, or would I realistically need some kind of sander? 4) You also say, "you'd want to calculate a little more carefully". what is the calculation in terms of area per can of paint and clear coat? Based on what you said above, it looks like the cost for paint and clear coat would be about $150 to $200.
Does that sound correct? Thanks,
R.
06YarisRSFredericton, New Brunswick, Canada · Aug 13, 2019#24 Originally Posted by
RMcG ↑ Thanks 06YarisRS,
Yes I do have a relative with a garage, so I may be able to talk them in to letting me use the garage. In order to try to understand better the requirements, 1) how long would a paint job take in your estimation? I suppose I could do it in increments, and not all at once.
In addition, 2) is there a temperature range I need to shoot for? I am presently in the Pacific Northwest of the US, so it generally does not get terribly hot or cold here, regardless of the season.
3) You mention sanding (above & in a previous post), would it be realistic to just hand sand, or would I realistically need some kind of sander?
4) You also say, "you'd want to calculate a little more carefully". what is the calculation in terms of area per can of paint and clear coat?
Based on what you said above, it looks like the cost for paint and clear coat would be about $150 to $200. Does that sound correct?
Thanks,
R.
Hey. I'll get back to you tomorrow with responses to your questions, but, yes, you can do it in stages.
Edit: I'll share my thoughts on a couple of your questions tonight.
2) I think as long as you're over 60 F you should be fine. It was terribly hot and humid the day I painted my car. I had condensation develop in my compressor. You won't have to worry about that. Above 60, your off gassing times between coats wll just be a bit shorter. Your paints should have Instructions on them.
3) hand sanding is time consuming. I would pick up a cheap palm sander if you don't already have one. If you do use a high build primer, you can block sand manually. We could talk about that a bit later if you move forward with the project.
4) I would just do some rough measurements and calculate the approximate surface area. Your product cans will give you a sense of single coat coverage. I would think that a couple hundred $ should be close to your anticipated costs, less some extras like sandpaper (400 -600 grit for before base coat and 1500 and 2500 for wetsanding your cured clearcoat), a block sanding block, a palm sander (if needed to be purchased), a solvent such as lacquer thinner, tack cloths, painters tape etc.
More to follow...
RMcGNorth America · Aug 17, 2019#25 Originally Posted by
06YarisRS ↑ Well, it's definitely repairable albiet a little more extensive than I had expected. ........ You would probably want to feather the paint down into the A-pillar a bit. The liftgate would likely have to be blended into the rear quarter panels a bit with some feathering of the base coat. But, you might get away with painting just the liftgate. I guess it all depends on the quality of job you're looking for.
06YarisRS,
I appreciate your advice. Can you give a little more detail on how to do the feathering or blending?
Thanks,
R.
06YarisRSFredericton, New Brunswick, Canada · Aug 19, 2019#26 Originally Posted by
RMcG ↑ 06YarisRS,
I appreciate your advice. Can you give a little more detail on how to do the feathering or blending?
Thanks,
R.
Sure. The idea of feathering the basecoat is to create a gradient that blends the color over a distance so that the change in color (there will be one as the paint is never a perfect match) becomes unnoticeable. You an do this by pulling the can away as you reach the end of your pass, or you can roll the can away from being perpendicular to the panel by twisting or flicking your wrist. You are essentially applying lots of paint at the area of damage and fading away (applying paint more thinly the farther you get from the damage). Once you have adequately covered (created your gradient), you mist the gradient.This will give a more uniform finish and the metallics will line up better.
So in summary, you don't paint to the edge of any panel, but blend over a distance. Now, you will clear coat the entire panel, otherwise you will have a different texture and reflectivity. Wet sanding and polishing the clear coat - especially with a high quality product such as SprayMax - will result in great gloss and depth.
Here is a video. I was mistaken earlier as I did not do what is technically an orientation coat. I did what I referred to as misting the panel. Because spray can spray patterns are much narrower than a spray gun, the paint is more prone to striping.
https://www.youtube.com/watch?v=4fvSA27QrWI RMcGNorth America · Aug 22, 2019#27 Originally Posted by
06YarisRS ↑ Sure. The idea of feathering the basecoat is to create a gradient that blends the color over a distance so that the change in color (there will be one as the paint is never a perfect match) becomes unnoticeable. You an do this by pulling the can away as you reach the end of your pass, or you can roll the can away from being perpendicular to the panel by twisting or flicking your wrist. You are essentially applying lots of paint at the area of damage and fading away (applying paint more thinly the farther you get from the damage). Once you have adequately covered (created your gradient), you mist the gradient.This will give a more uniform finish and the metallics will line up better.
So in summary, you don't paint to the edge of any panel, but blend over a distance. Now, you will clear coat the entire panel, otherwise you will have a different texture and reflectivity. Wet sanding and polishing the clear coat - especially with a high quality product such as SprayMax - will result in great gloss and depth.
Here is a video. I was mistaken earlier as I did not do what is technically an orientation coat. I did what I referred to as misting the panel. Because spray can spray patterns are much narrower than a spray gun, the paint is more prone to striping.
https://www.youtube.com/watch?v=4fvSA27QrWI
Thank you 06YarisRS,
You have truly inspired me (as has the entire forum many times). I think what I am going to do is to start out by plasti-dipping the large areas, like the roof and do some of the paint work on the smaller areas. That way I will get more experience with the painting process, which is less reversible than plasti-dip. Eventually I will remove the plasti-dip, fix the hail-induced pock marks and paint the larger areas when I have more time and experience with paint.
Unfortunately, I am pretty busy, and plasti-dip will give me some protection through the upcoming winter, is removable, and does not require as much prep or work as the more permanent solution of paint.
As you have correctly noted, there are natural boundary lines between the roof (and some other areas) and the rest of the car, so I do not necessarily have to have a match in color between those areas and the remainder of the car. In fact, I may use different plasti-dip colors. Some of the areas, however, lend themselves much more naturally to being painted with a color matched to the original color.
I'll also use the wipe on product recommended tmontague to protect the older painted areas.
Thanks again,
R. 🙂