Yarisworld Archive

2016 yaris sedan Cruise control

17 posts · 9,796 views

Eduardo_mtyOriginal postNov 27, 2015#1
A friend bought a 2016 yaris sedan with automatic transmission.

I tell him, buy this oem parts
84632-08021 switch Speed control
84633-02020 Cruise control wire
90080-15079 screw w/washer

A few minutes ago, i installed but no work.

any help i will appreciated
Installation pics

uploadfromtaptalk1448666277224.jpghttp://<a href="http://[ATTACH]56198...1;/ATTACH]</a>
uploadfromtaptalk1448667047239.jpguploadfromtaptalk1448667055626.jpg

Replies 16

CTScottUSA, CT · Nov 27, 2015#2
Is it a US market Yaris or one from another market?
Eduardo_mtyThread starterNov 27, 2015#3
I live in México and VIN start with J
CTScottUSA, CT · Nov 27, 2015#4
Originally Posted by Eduardo_mty ↑
I live in México and VIN start with J
OK. I thought that was the case.

Check for the presence of the connector D3 wires on the steering column connector. My 06-11 cruise control DIY shows the wire locations:

DIY: 2006-2011 Yaris OEM Cruise Control Complete Installation
Eduardo_mtyThread starterNov 27, 2015#5
I found this
Eduardo_mtyThread starterNov 27, 2015#6
uploadfromtaptalk1448672084129.jpg
CTScottUSA, CT · Nov 27, 2015#7
OK. I see the blue and brown under the black, which should mean that it is wired for cruise. It also looks like it is wired for steering wheel audio controls. Do you see the cruise control indicators in the instrument cluster?
Eduardo_mtyThread starterNov 27, 2015#8
yes, the cruise control icon i can see it with flash light
CTScottUSA, CT · Nov 27, 2015#9
Originally Posted by Eduardo_mty ↑
yes, the cruise control icon i can see it with flash light
OK. I am not sure about differences in features for the Mexican market Yaris, but it sounds like everything necessary is in place.

The only other thing I can think of to check is the presence of the ECM connector pin.
Eduardo_mtyThread starterNov 27, 2015#10
thank you i will check tomorrow the ECM connector pin
Eduardo_mtyThread starterNov 28, 2015#11
I Checked, And i will need to buy ECM Comnector A21 Pin (82998-24240)

See pictures

Picture lost · images.tapatalk-cdn.com
Picture lost · images.tapatalk-cdn.comPicture lost · images.tapatalk-cdn.comPicture lost · images.tapatalk-cdn.com
Eduardo_mtyThread starterNov 28, 2015#12
CTScott do you think... Traction control will be install it, with "simple" /easy wiring and switch


See pictures


Picture lost · images.tapatalk-cdn.com
CTScottUSA, CT · Nov 28, 2015#13
The A21 pin being missing on the 2016 may mean that the Mexico market ECM does not support cruise control.

Traction control requires support of both the ECM and the ABS ECU, so it can not be added without changing those (and making sure that all of the supporting sensors are present).
Eduardo_mtyThread starterNov 28, 2015#14
Originally Posted by CTScott ↑
The A21 pin being missing on the 2016 may mean that the Mexico market ECM does not support cruise control.

Then if i do that you do in your 34 pages manual (section 3), i cant get Cruise control
CTScottUSA, CT · Nov 28, 2015#15
Originally Posted by Eduardo_mty ↑
Then if i do that you do in your 34 pages manual (section 3), i cant get Cruise control
For the US Market Yaris that is true. I have not had experience with adding cruise to Mexico market Yaris, so we will find out with your work.

To test it, you can remove the rubber plug from that pin hole and stick a small piece of wire in from the back of the connector. If you measure the voltage on that wire with the ignition switch in the ON position you will see +12 V on that pin, if your car supports cruise control.
Eduardo_mtyThread starterNov 28, 2015#16
Thank you, i will do tomorrow
I will do....
1. Remove the negative wire from battery.

2. Remove the EMC Connector.
2.1 remove the waterproof Rubber plug
2. 2 install a wire

3. Reconnect the EMC connector
4. Reconnect negative wire to battery

5. Turn on the key
5.1 check wire voltage , if show 12v, it will work

This is the steps that i will do, its ok
laobovietnam · Aug 8, 2017#17
Originally Posted by Eduardo_mty ↑
Thank you, i will do tomorrow
I will do....
1. Remove the negative wire from battery.

2. Remove the EMC Connector.
2.1 remove the waterproof Rubber plug
2. 2 install a wire

3. Reconnect the EMC connector
4. Reconnect negative wire to battery

5. Turn on the key
5.1 check wire voltage , if show 12v, it will work

This is the steps that i will do, its ok
Hi friend. Did you have? Review your final
Can you show me. which is number pin of ECM ( ECU) for signal ccs ?
my car is 2014-2017 year