Yarisworld Archive

Tein Street Basis Coilover Install - 2007 Yaris Sedan NCP93 Stock

75 posts · 27,773 views · page 2 of 2

Replies continued

sheekeebutThread starterMississauga, GTA, Toronto, ON · Jun 25, 2014#51
Originally Posted by cali yaris ↑
The 2993 rears are just fine (in fact, feel better) on the Yaris. We've sold dozens of sets with no problems, no failures, and no complaints.

Happy to ship to Canada. Side note: I didn't get a million messages. Or a PM. Or an email, I *think*. Happy to PM you my personal cell phone number.
Then again, I wouldn't like to check a million messages. I'd think the caller was a jerk. 😛
vaironl-- · Jun 25, 2014#52
I have to save up for my school first, so in about 2 weeks I should be able to buy the tokicos from Garm. I saw them at around $15 less on a website, but I prefer to order from microimage. I made Garm go through hell with a purchase and he still treated me really nice 😆.

By the way you could have save some money with the springs, but now you do have adjustable height. In case of horrible winters/weather you have the option to raise the car.

And also, those pictures are sexy!!!!!!!!!!!!!


Sent from my iPhone using Tapatalk
sheekeebutThread starterMississauga, GTA, Toronto, ON · Jun 25, 2014#53
Thanks! For once, somebody who doesn't berate me for not going slammed! It's like peer pressure, I tell you.


And you're right about the adjustability. It's my nature to tweak things, so this worked out well. I'd like to keep adjustments to a minimum though, because alignments aren't cheap.

I take it you're all too familiar with winters. Are you from the GTA?


Sent from my XT1032 using Tapatalk
yariseggvvtiCali · Jun 26, 2014#54
Originally Posted by sheekeebut ↑
Thanks! For once, somebody who doesn't berate me for not going slammed! It's like peer pressure, I tell you.


And you're right about the adjustability. It's my nature to tweak things, so this worked out well. I'd like to keep adjustments to a minimum though, because alignments aren't cheap.

I take it you're all too familiar with winters. Are you from the GTA?


Sent from my XT1032 using Tapatalk
I didnt do any alignement at all and I had install adjustable front sway link too. I dont see or feel any problem to aliigment. I think those tech are b.s about aligments. it costs 150 each time.
sheekeebutThread starterMississauga, GTA, Toronto, ON · Jun 26, 2014#55
Originally Posted by yariseggvvti ↑
I didnt do any alignement at all and I had install adjustable front sway link too. I dont see or feel any problem to aliigment. I think those tech are b.s about aligments. it costs 150 each time.
Well it's true that after install and lowering, it neither pulls to one side nor tilts the wheel, which I guess is a good sign. And I can't tell for sure, but the Yaris seems more confident holding the front end at turns, at the same time feeling like the steering wheel is a bit more compliant, though sluggish, if you get what I mean. I'm pretty sure that the front camber and toe could be adjusted a bit to reflect the drop, if only to assign some quantifiable before/after parameters and be absolutely sure that there's nothing uneven going on.

And after reading Tamago's writeup

Tamago's guide to ultimate yaris handling

I'd be interested in adding a touch more toe-in and negative camber over stock, if they're not at that spot already. And if I feel a little adventurous, I'll try that flat washer shimming on the bolts between rear hubs and axles to get my rear toe and camber set. Those, after all, can be reset to "defaults" without needing the shop's rack, right?

Sure, it's only 1 1/2" (38 mm) of lowering, but I only intend to make up to 1/2" (13 mm) of adjustment up or down anyway. Assuming this logic works, if the alignment is set to my "midway" height -- the parameters of which you can bet will be recorded for future reference -- there should be no real need for realignment afterwards, as long as I stay within that +/- 1/2" of adjustment. Not like I'll miss anything far below or above that.

And the place I'm having it done at will let me dictate some last minute adjustments of my own while the thing's up on their lift. $102 gets all that done, and for quite some time afterwards I doubt I'll need it redone.
sheekeebutThread starterMississauga, GTA, Toronto, ON · Jun 26, 2014#57
Originally Posted by Exiwolfman ↑
Lol headlights ...I have been meaning to do same after I lowered my Yaris

sent from Mars using Moto g !
Well, this walks you right through it.

http://www.microimageonline.com/down...s/Lighting.pdf

Starting at page LI-88 (pdf page 89)
sheekeebutThread starterMississauga, GTA, Toronto, ON · Jun 26, 2014#58
And hey Garm. Like Yoda, but wiser and more powerful you are.

Thanks for managing pretty much everything I need to know about my car.
vaironl-- · Jun 26, 2014#59
Originally Posted by sheekeebut ↑
And thanks to microimage resources

http://microimageonline.com/forums/s...TECH-TSB-FILES
More specifically http://www.microimageonline.com/down...Suspension.pdf starting at page SP-59 (pdf file page 61)

I can visualise the axles' mounting plates and bolt patterns without even having to jack my car up.
Thanks a lot for diggin this up, I totally forgot about the MI PDF section I'm gonna have to do more research on the alignment stuff... I don't know if it's to the car, tires, or what the heck. I have to change my two front tires soon as they are rotting.
sheekeebutThread starterMississauga, GTA, Toronto, ON · Jun 26, 2014#60
Wait I don't get it. Something wrong with your ride, vaironl?
vaironl-- · Jun 26, 2014#61
Originally Posted by sheekeebut ↑
Wait I don't get it. Something wrong with your ride, vaironl?

Sorry I typed that message in a rush. Right now my two front tires are rotting (actually since I got the car), so I have to change those.but after lowering the car I keep hearing the need to do an alignment after about a week or two. I'm just not sure if it's for the tires or the car itself or what the hell it's for. Let's keep in mind this is literary the first time I'm doing this so a lot of research must be done.


Sent from my iPhone using Tapatalk
sheekeebutThread starterMississauga, GTA, Toronto, ON · Jun 26, 2014#62
Most if not all posts I've been reading suggest 1 week/200km to "settle", then get the alignment done. Mine happens this Saturday.

As for rotting, wow. Are the tires that old?
vaironl-- · Jun 26, 2014#63
Originally Posted by sheekeebut ↑
Most if not all posts I've been reading suggest 1 week/200km to "settle", then get the alignment done. Mine happens this Saturday.

As for rotting, wow. Are the tires that old?

I guess so, it was a car with around 27k miles on it. I don't know why but I have the feeling it might better to wait a bit more just in case (2-3 weeks)


Sent from my iPhone using Tapatalk
sheekeebutThread starterMississauga, GTA, Toronto, ON · Jun 26, 2014#64
I've already logged an extra 250 km (150 miles) since the installation. That does not play well with my OCD
vaironl-- · Jun 26, 2014#65
Put some new tires just today. This thread got me wondering and found a good place with low prices, I did get some really cheap tires called milestar, but the older ones were dry rotting (just learned that today) and had the risk of popping any time on me.
cali yarisCanoga Park, CA · Jun 26, 2014#66
hehe, you're welcome. 🙂 Don't forget, you only need a FRONT alignment -- don't let them charge you for a four wheel alignment. Nothing to adjust back there.

And hey Garm. Like Yoda, but wiser and more powerful you are.

Thanks for managing pretty much everything I need to know about my car.
sheekeebutThread starterMississauga, GTA, Toronto, ON · Jun 27, 2014#67
In fact, all the shops I asked were fairly up front (pardon the pun) about it. When I asked them if they were willing to use some washers I'd provide to have them do rear camber and toe, they said it really would use up their time, because that involves removing everything that bolts to the axle every time they need to adjust with another washer. A tech's time isn't cheap, and I respect that.

I think I'll try to figure out the rear settings myself after the front alignment is done. If the rear torsion bar's camber/toe are hard-set, I can't imagine any difficulty getting back to those settings by simply removing all washers.
sheekeebutThread starterMississauga, GTA, Toronto, ON · Jun 27, 2014#68
Originally Posted by vaironl ↑
Put some new tires just today. This thread got me wondering and found a good place with low prices, I did get some really cheap tires called milestar, but the older ones were dry rotting (just learned that today) and had the risk of popping any time on me.
What tire size?
vaironl-- · Jun 27, 2014#69
Originally Posted by sheekeebut ↑
What tire size?

195/60/r15 rear(new tires) 185/60/r15 in the front. I didn't even check at the shop :/ just asked for cheap tires. I also got a bit desperate and bought the tokicos from MI today lol. You guys wont even want to know the talk I had to go through with my mom.


Sent from my iPhone using Tapatalk
sheekeebutThread starterMississauga, GTA, Toronto, ON · Jun 27, 2014#70
Well, different tire sizes don't lend themselves well to tire rotations. That's why I don't want to stagger, nor get directionals. I'm on a budget, too.

Good on you though for getting the shocks before the springs, and not the other way around.

Is it the mom's ownership or yours?
vaironl-- · Jun 27, 2014#71
Originally Posted by sheekeebut ↑
Well, different tire sizes don't lend themselves well to tire rotations. That's why I don't want to stagger, nor get directionals. I'm on a budget, too.

Good on you though for getting the shocks before the springs, and not the other way around.

Is it the mom's ownership or yours?

Moms but I have to pay for everything lol.


Sent from my iPhone using Tapatalk
sheekeebutThread starterMississauga, GTA, Toronto, ON · Jun 27, 2014#72
Sorry to hear that. So you've got all the expenses, all the responsibility, AND all the nagging and criticism?

Pretty tough, man. I've felt your pain.
vaironl-- · Jun 27, 2014#73
Originally Posted by sheekeebut ↑
Sorry to hear that. So you've got all the expenses, all the responsibility, AND all the nagging and criticism?

Pretty tough, man. I've felt your pain.
I probably made it sound worst than it is. My mom just got a bit sad because of financial circumstances at the moment. She just had a baby recently so she doesn't work and I have to use part of the money from school/house/ and car payments to buy the shocks and struts. She's ok with it now. She also says that I shouldn't put money into a car that I will sell in the future 😆.
sheekeebutThread starterMississauga, GTA, Toronto, ON · Jun 27, 2014#74
Yeah, when it comes to resale value, modifications don't help at all. I've already accepted the fact that nobody cares about my personal preferences. They want to buy that car as close to new and original as possible.

At least you've gone with better shocks & struts. Should be a quick and painless installation, and I don't think you'll even need alignment done.
sheekeebutThread starterMississauga, GTA, Toronto, ON · Jun 28, 2014#75
So I've gone with most people's advice and stuck it out with just a 1.5" drop all around. It will take some getting used to, and I hope it hasn't fudged the roll couple much. Not like I'll be able to feel or measure it.

We'll see how that @$$hole Old Man Winter treats me this year, before I adjust anything else. I plan on a rear sway, then a short shift, probably in spring '15. Anything else afterwards will be simply for driver comforts, like a tint and low powered sub to complement the stock audio system. I do not expect this car to be a looker, EVER.

Thanks for coming to see the thread, everyone. Makes me feel special.