Yarisworld Archive

Official YARIS Wheel & Tire Guide

392 posts · 1,288,550 views · page 6 of 8

Replies continued

CueBallUtah · May 22, 2012#251
Originally Posted by kimona ↑
16x7, ET37, 195/50/16 will be a good fit. ET37 is the lowest offset I would trecommend with 195's.
I just got some 15x6.5, ET37 wheels.. Want to put 205/55R15's on them.. Will this be ok? What about a 205/50R15?
33OHDover, Ohio · May 23, 2012#252
Originally Posted by CueBall ↑
I just got some 15x6.5, ET37 wheels.. Want to put 205/55R15's on them.. Will this be ok? What about a 205/50R15?
Either tire will work well.

The 205/55/15 will have a more cushy sidewall, better ride, etc.

The 205/50/15 is closer to stock height, and will handle better.

Depends on what you're looking for.
CueBallUtah · May 23, 2012#253
Originally Posted by Black Yaris ↑
__________________________________________________ _______

Recommended offsets (ET) and tyre widths (mm):

ET35+ = 175-185
ET38-ET40 = 175-195
ET42-ET45 = 195-205
ET45+ = up to 215

Optional tyre sizes (diameter in inches):

*Commonly recommended replacement sizes

Fitment depends on wheel width, offset, and suspension mods.


185/60/15 = 23.7*
195/60/15 = 24.2*
195/55/15 = 23.4*
205/55/15 = 23.9*
195/50/15 = 22.7
205/50/15 = 23.1* (Most lowered applications)
215/50/15 = 23.5
225/50/15 = 23.9
^from first page of theread^
Maybe I'm reading this chart wrong, but wouldn't the 205/55/15 be closer to stock tire height than the 205/50/15? (23.9" high vs 23.1" high)
Thanks again! 😁
33OHDover, Ohio · May 23, 2012#254
Depends on which OEM size you go off of, I have always went off of the 175/65/14 tires that come on the base model - which is 23" tall.

At least on my speedometer (with my GPS and an iPhone app that tells speed) - this has always been more accurate than the larger 185/60/15 upgraded tire size that comes on the 15" package.
CueBallUtah · May 23, 2012#255
Oh I see that now. I was going off the 185/60/15's which is what I have now.
One last one.. will the 215/50/15's rub with the ET37 offset?
allyartJakarta, Indonesia · Jun 14, 2012#256
i got my yokohama s drive 195/55 R15 at USD70 each, new condition. think it was a good price.

visit my car: red yaris from jakarta
feel free to drop any comments and/or critism :)
new-yaris-ownerMontreal, Qc · Jul 10, 2012#257
Hi there !

Would like to know if my DAI Racer 15'' of 6,5'' wide will fit on 185/ tires?
yarisugiハワイ · Jul 11, 2012#258
^ yes, it will.
new-yaris-ownerMontreal, Qc · Jul 12, 2012#259
Thanks a lot for the answer !

Just trying to find out what type of rims are these ? There is no name on it, just Made in China

Picture not included in this copy
caineroadToronto · Sep 12, 2012#260
Will 215/45/17 work on stock suspension?
oryarisalberta, canada · Nov 17, 2012#261
Hi would 185/70/14 fit onto stock 2008 hatchback? THX
DeathBeardLos Angeles, CA · Nov 28, 2012#262
Chinese tires are sketchy at best
1.5Tampa · Nov 29, 2012#263
17 will fit just watch width and offset. With springs you might get minor rubbing on turns but should be fine.
phaznetYGK · Dec 6, 2012#264
I'm interested in some wheels on sale by one of the forum members.
Would 205/40 tires on 16x7 wheels work on yaris with tein s tech springs?
FHT_RacingHouston, TX · Jan 30, 2013#265
Just in case it hasn't been brought up before, the factory 15x5.5" steel wheels weigh in at 14.8lbs :)

My 15x7" WORK Emotion CR Kai's weigh in at 15.6lbs, so I'll be switching to Team Dynamics 15x7" which I hear weigh in at just over 13lbs...
33OHDover, Ohio · Feb 17, 2013#266
Joao, how wide are the wheels? If they are 16x7's, you won't have any issues at all with that offset and tire size.
why?harnett county NC · Feb 18, 2013#267
16x7 is probably pushing it weight wise, but at least you will have the torque of the diesel to help.
LOKinkCrestview, Fl/ Stafford, Va · Feb 19, 2013#268
I have an 07 Hatch lowered with springs, I am looking at putting on 17x7 Sparco Asetto Gara with 195/40/17 will I have any problems with rubbing or anything?
vtencolumbus · Feb 19, 2013#269
I'm running similar setup , with +37 offset . No rub at all ..... But after I added a 10mm spacer on the rear, it rub a little on a large dip .
LOKinkCrestview, Fl/ Stafford, Va · Feb 19, 2013#270
thank you! wheels and tires ordered.
Mikkelsen_7Denmark · Apr 23, 2013#271
Hello, i hope there is someone who can help me,
i am trying to figure this out..

I have a:
Toyota Yaris Hybrid.
right now i am driving on 15" standard weels and 175/65/r15 tires...

I want to go to 16" MAK Iguan Matt White.
(195/50r16 tirers)

But i dont know about the ET and the others thing...

I dont now what my 15" are in ET.....

What i can read, this might be the right one for 16"?

16" x 6 mm x4x100 mm ET43 57 mm
(thats the MAK Iguan)

Would these work?

Regards
Peter
yarisugiハワイ · Apr 23, 2013#272
16x6" ET43.
pcd 4x100
It will work.

16x7" would be ideal.
But the MAK Website says "not available". You may have to contact them first.
Mikkelsen_7Denmark · Apr 23, 2013#273
why would a wider rim, be better on a hybrid? ... then you got a bigger surface, that uses more BHP ?
mario98cPuerto Rico · Jun 2, 2013#274
15x7" +30 offset 205/50/15 tires. Will it rub?
jdmryePhilippines · Sep 17, 2013#275
16x7 et42 205/50 will they rub if i drop 1 inch all around?

thanks in advance
33OHDover, Ohio · Sep 18, 2013#276
Originally Posted by mario98c ↑
15x7" +30 offset 205/50/15 tires. Will it rub?
Likely to have minor rubbing there - it will be close and depend on your drop.

Originally Posted by jdmrye ↑
16x7 et42 205/50 will they rub if i drop 1 inch all around?

thanks in advance
You'll be fine.
speedysilvertexas · Sep 18, 2013#277
help choosing tires for two different sets. My car 3dr hatch would be lowered more +1
15x7 +32 looking at 195/50
16x7 +35 looking at 205/40

thank you in advance
1.5Tampa · Sep 18, 2013#278
what do you mean help? I dont see a question?

Are you asking which of those two you should go with? That would be a personal preference. If you like the way 15s look go with that, if you like the way 16s look go with that. I would not go wider than 195 on a 7, not saying you CANT go wider, that is only my preference
WeeYariGeorgetown, Ontario, Canada · Sep 18, 2013#279
Originally Posted by speedysilver ↑
help choosing tires for two different sets. My car 3dr hatch would be lowered more +1
15x7 +32 looking at 195/50
16x7 +35 looking at 205/40

thank you in advance
Those tire sizes are too short. 50 series should be on 16s and 40 series should be on 17s.
speedysilvertexas · Sep 18, 2013#280
Originally Posted by 1.5 ↑
what do you mean help? I dont see a question?

Are you asking which of those two you should go with? That would be a personal preference. If you like the way 15s look go with that, if you like the way 16s look go with that. I would not go wider than 195 on a 7, not saying you CANT go wider, that is only my preference
Sorry to clarify...I would like to know what size tires would fit best on a lowered yaris considering the wheel specs I posted?

Originally Posted by WeeYari ↑
Those tire sizes are too short. 50 series should be on 16s and 40 series should be on 17s.
so you're saying 50 series on both?
1.5Tampa · Sep 18, 2013#281
I disagree with WeeYari, I have run 45/50 on 15s 40/45/55 on 16s without issue. The shorter the sidewall the lower you will be to the ground and give the harsher the ride. Thicker side walls are usually more cushy.

Its going to come down to your wheel preference. Find the wheel you want and then find a tire to match.

Think of what you want out of your new tire/wheel setup like weight, performance, looks, stance, handling, etc thats a good way to start
WeeYariGeorgetown, Ontario, Canada · Sep 18, 2013#282
He's only dropping 1" so with a 195/50/15 or 205/40/16 it would almost be pointless if an objective is to reduce wheel gap.

This was me when I had 195/50/16s dropped 1.5". Wheel offset is +42 with 10mm spacers in the rear. Essentially +42 in the front, +32 in the rear.

2 attachments not included in this copy

yarisgeo13North Lauderdale, FL. · Sep 18, 2013#283
I agre about putting over sized tire/wheel combo on a Yaris
33OHDover, Ohio · Sep 19, 2013#284
Originally Posted by speedysilver ↑
help choosing tires for two different sets. My car 3dr hatch would be lowered more +1
15x7 +32 looking at 195/50
16x7 +35 looking at 205/40

thank you in advance
Originally Posted by speedysilver ↑
Sorry to clarify...I would like to know what size tires would fit best on a lowered yaris considering the wheel specs I posted?


so you're saying 50 series on both?

He's saying 205/50/15 (or 195/55/15) on the 15", and 195/50/16 (or 205/45/16) on the 16".
bcbushcubBritish Columbia · Oct 13, 2013#285
hey guys
Just a old man with a stock daily driver.
But I needed new tires and I do sometimes push it a tad in corners.
I went with the advice that gets posted on here from those in the know.
And Im happier then a pig in....Well you know.
So thanks guys! 😁
RigaudRigaud, Quebec, Can. · Mar 30, 2014#286
Originally Posted by 1.5 ↑
I disagree with WeeYari, I have run 45/50 on 15s 40/45/55 on 16s without issue. The shorter the sidewall the lower you will be to the ground and give the harsher the ride. Thicker side walls are usually more cushy.

Its going to come down to your wheel preference. Find the wheel you want and then find a tire to match.

Think of what you want out of your new tire/wheel setup like weight, performance, looks, stance, handling, etc thats a good way to start
Precisely. If you go with lower profile sidewalls then invest in better shocks/struts. Your ride will be harsh. Theirs always a domino effect when you start changing your cars set up from stock specs. Been doing this for almost 33 years now, I see all kinds of messed up upgrades or set ups still.
why?harnett county NC · Mar 30, 2014#287
That is why I got coilovers and tires with a massive sidewall. I get sensational handling and tires with a gigantic sidewall to protect my wheels. Couple that with the stock seats and while I hear every bump I don't feel anything.
KTSTrinidad and Tobago · Jun 13, 2014#288
Hello everyone,
I have a question/concern.....
I put my OEM Vitz RS rims [16x6, ET51] with 205/50/16 on my wife 07 ncp92r 4 door sedan. The tire now rubs on the front shock and chassis with the steering at full lock. I installed a 5mm spacer and it still does the same. I observed that the sedan has a much, much smaller turning radius than my 07 Vitz RS. This combination was never a problem on my car. I am now using her 15x7 ET42 205/50/15 which gave no problems on either car.
Is it normal for the 16x6 ET51 with 205/50/16 to have fitment issues on the sedans????
What can be done to rectify the fitment issues without future problems????
Buying new wheel/tire combos for either car is not an option but if we have to switch back we will both be disappointed.
Any assistance will be appreciated.
Thank you.
rockyyChicago · Sep 9, 2014#289
Guys can i put 14" wheels on my yaris from 2013 year?
sheekeebutMississauga, GTA, Toronto, ON · Sep 9, 2014#290
Yes
stevens_ukUnited Kingdom · Oct 11, 2014#291
Does anyone know if Toyota sells these wheels? from the older 1.8 SR model.

Picture not included in this copy
thebeaglebeagleVermont · Nov 4, 2014#292
1. Is this updated for 2015? My Yaris has 175/65HR15s.

2. Is it safe/a good idea to put on 185s or 195s for snow tires? It is sometimes difficult to find a 175s.
JimKellyfanthe good Carolina · Nov 11, 2014#293
I will post pics when I get em on, I just ordered through Ford ,Michelin Premier A/S 205/50/16 V rated, to replace bone stock T rated cooper slide in rain tires....
Also, Konig Feather Black, 13.8 pound rims, woo hoo....Getting the tires for 142 and change each with a 70 dollar rebate and got the feathers for 426 on discount tire direct....they have some smoking deals, as I was having trouble between the DR 41 and the DR 16 and DR 31, or the feathers. Had my eye on the feathers for some time now. sold the wife's camry rims, which help offset, the cost, sold them for 370, so it's like 50 some bucks for my rims I tell her....nice, cannot wait....
WasabiAngelToronto · Nov 13, 2014#294
Need Help Please...

I know there's some very inclusive details on the first page with all the numbers, but I'm not too familiar with this stuff.. so, was wondering if I can get some help.

I have a 2010 Yaris 5 Dr Hatch LE. No mods.

Looking to put winter's on and I see Costco has a sale for Michelin - X-Ice® Xi3.
Tire Size: 175/65R14/XL 86T
Including taxes (Cdn) and installation per tire it's $137.28.

Good choice? Good price? Correct size?
Thank you for all your help!
Ben_SLC, UT · Dec 7, 2014#295
how about 225/45/15x7 et40 with coilovers? will this need spacers?
JimKellyfanthe good Carolina · Dec 15, 2014#296
Here are the pics from just after install.
To report, the tires do rub a bit (11 am position LF -- 1 pm position RF) up front when driving severely (40-50 mph around a sharp turn)...
A friend was saying I could have a body shop roll the fenders....
I was wantin to get high performance or heavier sprung springs.
Currently, I think coil overs are the only option, as I definitely not lowering it.
(an example, on old Caprice, I could put regular front or rear, or the ones I went with, cargo coils in rear - no HP available, and in front HP springs) Then, coil over shocks...
I was hopin someone made HP coils for us...anyone know of any, PM me pls.

Someone earlier asked about Michelin X-Ice (awesome and should fit no issues on a 14 inch rim)

2 attachments not included in this copy

WeeYariGeorgetown, Ontario, Canada · Dec 17, 2014#297
Originally Posted by Ben_ ↑
how about 225/45/15x7 et40 with coilovers? will this need spacers?

225s! You trying to float the thing on water?


Sent from my iPhone using Tapatalk
Ben_SLC, UT · Dec 17, 2014#298
Lol! If I ever get enough money together for a set of dedicated auto x tires I want to get my moneys worth. 15x7 rims and 225 tires are the fattest tires that are legal for stf class which is what I would plan on running. Go big or go home!
markcubanMassachusetts · Jan 27, 2015#299
I'm looking at a set of ICW racing rims from a craigslist ad the are 15" universal 4 lug pattern. Will they fit my 07 Yaris?
Ben_SLC, UT · Jan 27, 2015#300
The easiest way to check is to go down there and try them. If they bolt upa and don't scrape the brakes or the fender/body you are good