Yarisworld Archive

Official YARIS Wheel & Tire Guide

392 posts · 1,288,550 views · page 2 of 8

Replies continued

brickhardmeatInner City, Dallas · Jun 26, 2007#51
Originally Posted by kurokoma-kun ↑
OK. please, please don't flame me for this question. I have searched and read and I do understand what the x/x/x numbers mean, 😛 but...

Why is 195/60/15 not recommended size?

My reason for asking is I just bought 15x6.5 wheels, and have been trying to find 195/55s, but no local shop has them in stock! Another option is Discount Tire Direct because I have a $50 coupon, but the 55s are MUCH more expensive than the 60s!

I'm guessing the 60s will be ok, even tho speedo will be off a bit, just wanted to run it by the experts...

60 is too much side wall babe

I went with 205/50/15

edgeracing.com may have exactly what you are looking for or you could go 205/55/15
kurokoma-kunmy own little world · Jun 26, 2007#52
Originally Posted by brickhardmeat ↑
60 is too much side wall babe
Yeah, you're right. I know you are supposed to maintain stock wheel/tire diameter so as not affect suspension geometry. But I was not understanding clearly how much increased sidewall height affects cornering. That extra flex supposedly gives better ride but makes for sloppy cornering, exact opposite of what i'm going for.

Was just trying to save money again--dayam, why am I so cheap? 😳 But it turns out there are LOTS of good 205/50 choices so that what I'm getting! 😁 Springs/shocks next!
brickhardmeatInner City, Dallas · Jun 26, 2007#53
Originally Posted by kurokoma-kun ↑
Yeah, you're right. I know you are supposed to maintain stock wheel/tire diameter so as not affect suspension geometry. But I was not understanding clearly how much increased sidewall height affects cornering. That extra flex supposedly gives better ride but makes for sloppy cornering, exact opposite of what i'm going for.

Was just trying to save money again--dayam, why am I so cheap? 😳 But it turns out there are LOTS of good 205/50 choices so that what I'm getting! 😁 Springs/shocks next!

205/50/15 is my #1 choice on this car. It will only slightly thow the speedo and the odo at 10000 will likely read 10300 not enough to make any difference for me. It just looks right to me. you will want a good drop though because you'll be dealing with an extra 1/2 inch of wheel gap so I would suggest DF's or Coilovers or Tein springs. Just something to consider. I got my Basics today and I am drooling over them right now.
EddAustralia · Jun 27, 2007#54
Heh, you should go extremely the other way, so when you go to sell "Yaris, 7 miles, excellent condition, 5 years old". 😉
WolfWingsKansas City, MO, USA · Sep 13, 2007#55
Originally Posted by brickhardmeat ↑
205/50/15 is my #1 choice on this car. It will only slightly thow the speedo and the odo at 10000 will likely read 10300 not enough to make any difference for me.
Hell, the factory 15" OEM versus 14" OEM tires have more of a difference than that. 10000 on the 15" factory tires would read as 10400ish on the 14" factory tires.
c-one yarisLas Vegas · Sep 28, 2007#56
i lowered my yaris with the tanabe DF210 springs... i want to know if these will fit my car WITHOUT ANY KIND OF RUBBING WHAT SO EVER:

RIM:15"x7" DRAG DR-30
TIRES: 225/50/15 Falken ZEIX ZE-512

AND if you have any suggestions i would also appreciate that.
THANKS!
Black YarisThread starterToledo, OH · Sep 28, 2007#57
no they will not fit with out ANY rubbing, that is why I got rid of my my 225/50R15's
c-one yarisLas Vegas · Sep 28, 2007#58
ok. now what's the widest i can go on 15", 16", and 17"?? better yet, is there an official tire guide for lowered yaris'?? that be a lot easier. Thanks Black Yaris!
Black YarisThread starterToledo, OH · Sep 28, 2007#59
widest you realy want to go on the front is a 205 when you are lowered, you can go 215 in the rear... you want to run staggard or not?
here are some recs to run all the way around
15-205/50, 205/55
16-205/50
17-205/40, 205/45
kimonaHuntington Bch, CA · Sep 28, 2007#60
Originally Posted by c-one yaris ↑
ok. now what's the widest i can go on 15", 16", and 17"?? better yet, is there an official tire guide for lowered yaris'?? that be a lot easier. Thanks Black Yaris!
That answer depends on wheel width and offset.

If you post those specs, we can probably help you with tire sizing.
Black YarisThread starterToledo, OH · Sep 28, 2007#61
Originally Posted by kimona ↑
That answer depends on wheel width and offset.

If you post those specs, we can probably help you with tire sizing.
true... I was just giving general sizing options
EnergiserWollongong, Australia · Oct 21, 2008#62
Hey guys,

I'm looking at getting some new wheels for my Yaris. It's been a fairly lengthy process with me finding something I like, then finding it isn't appropriate for one reason or another (usually associated to my expensive taste, and the fact I'm trying to get nice 16" wheels in Australia...)

The wheels I'm looking into at the moment are Enkei SC03's, 16" x 7", pcd of 4x100, and am planning to put 205/50/R16 rubber on them. The problem comes when I'm trying to figure out the offset.

From what I can find online, these wheels come in a +35 variety, and a +43 variety. I've noticed a few people on the forums with slightly larger offset on the front as opposed to the back (say +42 on front, +36 on back) and was wondering if it's worth going to that sort of trouble, or if I'm better off going +43 all around?

I haven't gone looking for quotes on these yet, wanted to finalise what I want before I start... so for all I know, these could be more expensive than I'm willing to pay, too.

Regards,
Energiser

Edit: Where on the Yaris is the tyre placard generally located? I can find a sticker inside the glove box which mentions my stock 14 x 5 steel wheels, but I thought they were supposed to list the range of wheels suitable for the car. Or at least the range available from the dealership as options (which are 15 x 6 here in Australia).
kimonaHuntington Bch, CA · Oct 21, 2008#63
ET43FR//ET35RR would make a great staggered offset with 205/50 rubber. I run a set of 45/38's on mine with 205's and the fitment is excellent. I'm not a fan of tyre rotation, so that's not an issue for me... but, it may be a consideration for you.
aruntoIndy · Nov 3, 2008#64
Will 15x6.5" 38mm offset with 195/55/15's with Tanabe DF's rub?
whooppee777Maryland · Nov 10, 2008#65
i want to get these rims.

http://www.axiswheels.com/wheels.php?id=racer-x

15x7 in the front and 15x8 in the rear. I know the front will be fine, my only worry is the -.27 offset on the rear wheels. can it be done? Also i'm dropped on Tanabe DF210's

Picture not included in this copy
mchllp925winnipeg, MB · Nov 10, 2008#66
Hello everyone.
So for clarification...I use racing discs over my 185/60R15's allseasons, can I put 205/50R15's on my Yaris without any issues such as rubbing? I do not intend to lower my car.
I just want wider tires. And if so, do you think it would throw off the speedometer?
kimonaHuntington Bch, CA · Nov 10, 2008#67
Originally Posted by mchllp925 ↑
Hello everyone.
So for clarification...I use racing discs over my 185/60R15's allseasons, can I put 205/50R15's on my Yaris without any issues such as rubbing? I do not intend to lower my car.
I just want wider tires. And if so, do you think it would throw off the speedometer?
If you're not lowering, then install 205/55/15's with no worries. 205/50/15's are too short with stock suspension. Your speedo will be fine.
Black YarisThread starterToledo, OH · Nov 10, 2008#68
oh shit, i almost forgot about this thread.... I will do some updating to the first post
Kimona, feel free to make any edits you see fit
mchllp925winnipeg, MB · Nov 10, 2008#69
Thanks for the quick reply Kimona.
Appreciate it!
Darrin
darthbauerUSA · Nov 14, 2008#70
So will these fit and rub?

17x7.5 offset is 45 wheel with 215/40 rubber?
kimonaHuntington Bch, CA · Nov 14, 2008#71
Originally Posted by darthbauer ↑
So will these fit and rub?

17x7.5 offset is 45 wheel with 215/40 rubber?
Are you lowered, and if so, how much?
kimonaHuntington Bch, CA · Nov 14, 2008#72
Originally Posted by Black Yaris ↑
oh shit, i almost forgot about this thread.... I will do some updating to the first post
Kimona, feel free to make any edits you see fit
Okay. I'll take a peek later.

EDIT: I've made a few changes to the wheel/tyre guide. I'll get back to it another time and update tyre size recommendations.
darthbauerUSA · Nov 14, 2008#73
Right now I am not lowered. If I do lower I will go with the TRD sportivo set up with the shocks and springs.
kimonaHuntington Bch, CA · Nov 14, 2008#74
17x7.5 ET45, 215/40 rubber. Should be okay with TRD drop.
whooppee777Maryland · Nov 17, 2008#75
u wont rub with that. any takers for my question above?
kimonaHuntington Bch, CA · Nov 17, 2008#76
Here you go...777:

"...the one of a kind 15x8 has a 5 inch lip! This is done with a negative 27 offset, and can only fit the most extreme widebody fitments."
kimonaHuntington Bch, CA · Nov 24, 2008#77
Originally Posted by DJexor ↑
Hello there, I see all sizes for a new Yaris. Does anyone know what the max offset would be on an 2001 TS model (oldest model)? Would prefere 17". Thinking of Work CR Kai 17x7 off +42
Don't know what the min/max wheel/tyre fitments are for the 2001 model, but I believe that 17x7, ET42 should work... no worries.
Black YarisThread starterToledo, OH · Nov 24, 2008#78
you can run low offsets similar to the scions if you want
hafeezBrampton, Ontario, Canada · Jan 21, 2009#79
i am going to lower my yaris sedan with the tanabe DF210 springs. i just want to know if these rims will fit without it rubbing or causing any problems. They are 17" x 7" Tenzo Passion 5 ET42 wrapped in 205/40/17 Kumho Ecsta tires. Thanks in advance.
kimonaHuntington Bch, CA · Jan 21, 2009#80
Originally Posted by hafeez ↑
i am going to lower my yaris sedan with the tanabe DF210 springs. i just want to know if these rims will fit without it rubbing or causing any problems. They are 17" x 7" Tenzo Passion 5 ET42 wrapped in 205/40/17 Kumho Ecsta tires. Thanks in advance.
Should be okay with that setup.
kounj · Jan 21, 2009#81
i am looking at 15''/7'' et38 should i get 205/50 or 195/55.
kimonaHuntington Bch, CA · Jan 21, 2009#82
Originally Posted by kou ↑
i am looking at 15''/7'' et38 should i get 205/50 or 195/55.
Are you lowered?
kounj · Jan 21, 2009#83
yes trd sportivo.thanks
kimonaHuntington Bch, CA · Jan 21, 2009#84
Originally Posted by kou ↑
yes trd sportivo.thanks
Well, with 15x7, ET38, I would prefer to run 195mm rubber.

195/55/15 tyres sound like a good choice with your setup.
kounj · Jan 21, 2009#85
thank you i will start looking.
Black YarisThread starterToledo, OH · Jan 21, 2009#86
I like the updated guide Kimona!
kimonaHuntington Bch, CA · Jan 21, 2009#87
Originally Posted by Black Yaris ↑
I like the updated guide Kimona!
Thanks. I did that a while back. Not complete yet. I'll get on it one of these days and finish it up.
kimonaHuntington Bch, CA · Jan 21, 2009#88
Originally Posted by kou ↑
thank you i will start looking.
You can find a bunch of tyre choices at this site: tires-easy.com

Sort by price, then click on shipping quote to find the real price. Shipping varies quite significantly by tyre.
hafeezBrampton, Ontario, Canada · Jan 21, 2009#89
thanks a lot kimona
MarfulionFlorida · Feb 4, 2009#90
Performance wise, what would be the best tire, rim, etc size for a yaris puttin out about 150hp? thanks
GrayFoxAustralia · Feb 22, 2009#91
Here is another good calculator, just in case you found the other ones a bit too confusing. This is also good to compare stock size with any aftermarket size.

http://www.miata.net/garage/tirecalc.html
SaggioSeattle WA, · Mar 5, 2009#92
Subscribed. Thanks!
tonygtoronto · Mar 16, 2009#93
those TRD wheels make no sense. With the TRD springs and the TRD Option 18x7.5, ET42, 215/35/18 = 23.9

can someone explain to me how these wouldnt rub big time? If 205 rubs on stock wheels, how is 215 with a 42 offset not going to rub?
pixithaPortland, OR · Apr 7, 2009#94
Does anyone know the exact dimensions of this wheel: http://www.trdsparks.com/displaypart...&parts_id=1101

I have the standard steel wheel black and ugly with ghetto hubcaps and wan't something else...

I have 185/60/15 on the wheels right now and want to make sure the Toyota alloy wheels from TRD will still work with those and such?

thanks!
-pix
goku87AK · Apr 16, 2009#95
4x100
scapeBeaufort, South Carolina · May 1, 2009#96
from a performance and wallet stand point, what is a recommended setup for standard springs and 1.5" dropped? I keep finding 15" x 6.5" is about as large without getting too heavy (i was hoping to go as light or lighter than stock, if that's possible while still going slightly taller and much wider). assuming 15x6.5, is 185/55 a good fit, or are the tires too skinny for the rim?
scapeBeaufort, South Carolina · May 1, 2009#97
now that i'm looking around 205/50/15 looks more appealing on a 15x6.5
derickveliz2Central, MA · May 1, 2009#98
I have 205/50/15!

.
scapeBeaufort, South Carolina · May 25, 2009#99
Originally Posted by Black Yaris ↑
Staggered fitments:


2. Staggered tyre widths are less common, especially on front wheel drive cars. These applications even out front to rear fitment. They are not recommended for the track, but as an appearance option they are safe under normal driving conditions. Staggered tyre widths preclude tyre rotation.

Example: FR 205/55/15//RR 225/50/15

Example: FR 205/50/16//RR 215/50/16

Example: FR 205/40/17//RR 215/40/17
why are staggered tire sizes not recommended for the yaris? too much understeer as a result?
tk-421Dagobah · May 26, 2009#100
Originally Posted by derickveliz2 ↑
I have 205/50/15!

.
+1
Although 205/55/15 is still perfectly acceptable if you'd rather fill out the wells a bit more. I'm very happy with my setup though.