duende_80Original postLeon, Spain. · Sep 24, 2013#1Hi all, I am installing a central locking kit in my yaris 5 door 2008, this in particular:
http://www.ebay.es/itm/221177044983?...84.m1497.l2649 I followed the steps of the central locking Tutorial CTScott the first post of this thread:
Remote Start DIY Wiring Guide 2006-2010 Yaris, the problem is that I have understood that the closure centralized is negative, but I am only works for positive / negative and put it in doubt wrong not sure I would like to put it wrong.
Do not know if this scheme does not work for my car being European is not written English and half do not understand.
The scheme uses my kit is this:
Picture lost · sim1.subirimagenes.net Picture lost · sim1.subirimagenes.net And that works for me is the outline:"positive and negative trigger" and I believed that it was worth for the yaris was: "negative trigger"
A greeting and thanks.
Replies 12
CTScottUSA, CT · Sep 24, 2013#2Welcome!
The Yaris does require negative triggers for the lock and unlock, so you will wire your European Yaris the same as the Japanese built US Yaris.
duende_80Thread starterLeon, Spain. · Sep 24, 2013#3Thanks for the reply CTScott, then I understand that I have to do the outline on the left (negative trigger), but doing it that way works I just lock release button and the lock does not work, but if I use the scheme right (positive and negative trigger) it works perfectly, but I understand that with this scheme unlock'm getting positive and if require negative trigger the car be damaged something.
Picture lost · sim1.subirimagenes.net
I'm doing well or I am failing you?
A greeting and thanks.
CTScottUSA, CT · Sep 24, 2013#4Are you using aftermarket lock actuators or did your car come with power locks?
duende_80Thread starterLeon, Spain. · Sep 25, 2013#5My car comes with original central locking remote control, what I wanted to do was change the original remote control of another key with remote control
CTScottUSA, CT · Sep 25, 2013#6 Originally Posted by
duende_80 ↑ My car comes with original central locking remote control, what I wanted to do was change the original remote control of another key with remote control
A fuse would blow if the car was not happy, so you may be OK. Were the wire colors on your car the same as in my document?
If they were not, which ones were different.
duende_80Thread starterLeon, Spain. · Sep 25, 2013#7Yes, the colors are the same color, but still later ire and otherwise confirmed the car because if the colors were very similar.
duende_80Thread starterLeon, Spain. · Sep 25, 2013#8CTScottUSA, CT · Sep 25, 2013#9Try it with the positive/negative method, but do not connect +12 volts to the two wires where it shows +12. Just leave those two wires not connected.
duende_80Thread starterLeon, Spain. · Sep 25, 2013#10With the positive / negative trigger works well, if you say I can do it I will fio me more about your experience than mine.
So I'll take and will put the final installation of automatic rearview mirror indoor to what I have now provisionally.
duende_80Thread starterLeon, Spain. · Sep 27, 2013#11CTScott, our car has door control receiver, you could remove the door control receiver and set the exchange of kit? or incompatible? Because I think the other way I will not have all the options you have the original closure, is not it?
What I do like about your car is that you have to give 2 clicks to open all the doors in the car with a pulsation our open all doors and more settings like yours.
CTScottUSA, CT · Sep 27, 2013#12 Originally Posted by
duende_80 ↑ CTScott, our car has door control receiver, you could remove the door control receiver and set the exchange of kit? or incompatible? Because I think the other way I will not have all the options you have the original closure, is not it?
What I do like about your car is that you have to give 2 clicks to open all the doors in the car with a pulsation our open all doors and more settings like yours.
You could remove the door control receiver if you are using an aftermarket one. Having both in place should not cause problems, but is is better to just have one in the system.
The single or double click for the doors is usually programmable with both OEM and aftermarket central locks. With Toyota, you need the Toyota service tool to change from one mode to the other.
duende_80Thread starterLeon, Spain. · Sep 28, 2013#13Thanks CTScott, I think I found a bug in my scheme, I put a wire had to go to ground and opening, I saw the outline of a yaris club mate of Spain which is the same pattern and I saw that the opening Cable is the top of the dough, when it stops raining in the car proves negative trigger.