Yarisworld Archive

Sedan GT Street Kit Install Thread (WIP)

85 posts · 23,351 views · page 1 of 2

47_MasoN_47Original postNorthwest Alabama · May 30, 2013#1
Snagged this kit late last week and it came in yesterday. I didn't have a chance to do a test fit then, but after work today me and my dad got after it and got it mocked up. It fits really well! The back has one side that may need a little work, but I think the rest I should be able to paint and install myself.

Enough talk, on to the pics!

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Replies 84

Betriventedmonton · May 30, 2013#2
Lookin' good! Hard to imagine it painted though. You gonna do blue or some kind of dark grey?
Kaotic LazagnaCentral Valley, CA · May 30, 2013#3
Lucky! One of the best kits available.

Your face is looking a little burnt, might want to use more sun screen and stay away from direct sunlight. hahaha j/k =P
47_MasoN_47Thread starterNorthwest Alabama · May 30, 2013#4
Originally Posted by Betrivent ↑
Lookin' good! Hard to imagine it painted though. You gonna do blue or some kind of dark grey?
Thanks! I'm really torn on what to paint it. My first thought was to just go with the body color (I still have a fair bit left after painting my wing), however I think a dark grey would look good too. I can't make up my mind... Anyone got suggestions?

lol Kaotic, that's my dad. 100% scottish (I'm 75%) so we have a lot of red tint :P
fnkngrvIn The Hotbox · May 30, 2013#5
go bright orange and make a statement
TickleTimeTimArkansas · May 30, 2013#6
I think silver or charcoal would look good but that's just me. Can't wait to see finished product.
Kaotic LazagnaCentral Valley, CA · May 31, 2013#7
Originally Posted by 47_MasoN_47 ↑
Thanks! I'm really torn on what to paint it. My first thought was to just go with the body color (I still have a fair bit left after painting my wing), however I think a dark grey would look good too. I can't make up my mind... Anyone got suggestions?

lol Kaotic, that's my dad. 100% scottish (I'm 75%) so we have a lot of red tint :P
😆



I'm going to go against everyone and say paint matched. Otherwise, people might think either A. you're a ricer, and/or B. you're too cheap to paint the kit. With that said, it's your car and you should do what you like 😉
Kaotic LazagnaCentral Valley, CA · May 31, 2013#8
I'm not that great at paint matching. 😛

1 attachment not included in this copy

cali yarisCanoga Park, CA · May 31, 2013#9
^ good photoshop!
TickleTimeTimArkansas · May 31, 2013#10
Looks pretty good
cali yarisCanoga Park, CA · May 31, 2013#11
You can put red reflective tape under the rear fogs, or I can get you some legit rear fogs for that.
47_MasoN_47Thread starterNorthwest Alabama · May 31, 2013#12
Snap, that photoshop looks awesome! Thanks for doing that, I'm saving that for sure!

Hmm, I'd be interested in those rear lights, what would that cost?
1.5Tampa · May 31, 2013#13
That looks like the trd sportivo kit. Best Vios kit out there.
cali yarisCanoga Park, CA · May 31, 2013#14
^ It says GT Street on it. 🤷
Kaotic LazagnaCentral Valley, CA · May 31, 2013#15
Was going to post these last night, but the site went missing 😆

3 attachments not included in this copy

Kaotic LazagnaCentral Valley, CA · May 31, 2013#16
And the rest.

4 attachments not included in this copy

Kaotic LazagnaCentral Valley, CA · May 31, 2013#17
Originally Posted by cali yaris ↑
^ good photoshop!
Thanks 👍


Originally Posted by 47_MasoN_47 ↑
Snap, that photoshop looks awesome! Thanks for doing that, I'm saving that for sure!

Hmm, I'd be interested in those rear lights, what would that cost?
Thanks and no problem 🙂
cali yarisCanoga Park, CA · May 31, 2013#18
Matching the wheels (gun metal) or body color are best.
SeptembersrainSan Antonio · May 31, 2013#19
Photoshop with black trim? That's the only other color I'd put if it wasn't painted to match.

Edit: Yes, I'm weird. =D
MyzticZ3r0Las Vegas, NV · May 31, 2013#20
I like the gunmetal look - it's clean with the rims!
47_MasoN_47Thread starterNorthwest Alabama · May 31, 2013#21
Oh man, I really like that gunmetal. Ugh, so torn between whether to go with the body color or the wheel color.... It looks great either way...
jcboyAsia · May 31, 2013#22
great! this is the only bodykit that i liked. other than a "Euro" setup, rubber front lip (home depot) and/or side skirts only, that is.

unfortunately, ABS plastic kits are not available here (or not cheap, either way means the same for me) and i dont want to go fiberglass.

question, how do you plan to install the sideskirts? i won't suggest drilling holes in the body (the only hole available is for the front mudguard AFAIK). do we have holes at the bottom for clips or is it purely 3m mounting tape to install?

BTT, id say color-matched with black front center and rear center parts --like the factory installed ones on white.

Picture not included in this copy

Picture not included in this copy
cali yarisCanoga Park, CA · May 31, 2013#23
gunmetal will be a way more forgiving color if you are doing it yourself
TickleTimeTimArkansas · May 31, 2013#24
Do gunmetal. Makes it look less corolla s.
Betriventedmonton · May 31, 2013#25
Oh god I lol'd so hard at the other colours
Kaotic LazagnaCentral Valley, CA · May 31, 2013#26
Glad I could be of some help and confuse you even more. HAHAHA
Kaotic LazagnaCentral Valley, CA · May 31, 2013#27
Originally Posted by Betrivent ↑
Oh god I lol'd so hard at the other colours
lol, you never know. I had it open at the time and just went crazy. 😆 😆 😆
fnkngrvIn The Hotbox · May 31, 2013#28
I like the gunmetal and peeps can say what they want, but I also like the brighter yellow combo too.
Kaotic LazagnaCentral Valley, CA · May 31, 2013#29
For me it's color matched. If not, then for some reason I'm leaning towards bright yellow or that red color. haha
fnkngrvIn The Hotbox · May 31, 2013#30
This thread is really getting me to chomp at the bit for the winter to come around so I can bring my car down to Alabama again to have the exterior redone. 🤤
47_MasoN_47Thread starterNorthwest Alabama · May 31, 2013#31
Be sure and drop by flotown :)
47_MasoN_47Thread starterNorthwest Alabama · Jun 1, 2013#32
I started to prime this today and then remembered that I was going to have to pull the bumper cover off to do the projector conversion I've been putting off. Rather than put the kit on just to have to take it off again later I finally got the motivation to install the projectors.

Everything pulled off the car
Picture not included in this copy

Missy, my favorite assistant
Picture not included in this copy

Do you like your headlight medium, or well done?
Picture not included in this copy

Picture not included in this copy

I was going to paint when suddenly a wild rainstorm appeared. Taking a break now, probably going to take a shower and play some games for a little while, then do the sanding and paint if the rain has quit.
Betriventedmonton · Jun 1, 2013#33
Why did the rain stop you?
47_MasoN_47Thread starterNorthwest Alabama · Jun 1, 2013#34
Dad doesn't want me painting stuff in the garage.
AstromanWenatchee, WA · Jun 1, 2013#35
Nice looking kit, I like it.
henryleeUnited States · Jun 5, 2013#36
Body color paint. I think any other colors makes the car look cheap. Also what springs are you on?
47_MasoN_47Thread starterNorthwest Alabama · Jun 5, 2013#37
I'm on NF210s.
47_MasoN_47Thread starterNorthwest Alabama · Jul 16, 2013#38
Well, TRS still has halos on backorder. Car is still torn apart in the garage. At least I've gotten some painting done though...

I decided to go with wheel color for the kit. The paint was cheaper and I just liked the idea of 2 tone. I'll be clearcoating this one today, and possibly starting to mount it.

Picture not included in this copy
Picture not included in this copy
jRossIndianapolis, IN · Jul 16, 2013#39
Yellow looks the best!
jRossIndianapolis, IN · Jul 16, 2013#40
Originally Posted by 47_MasoN_47 ↑
I'm on NF210s.
What size wheels/tires?
malibuguyWestminster, MD · Jul 16, 2013#41
Damnit thats the kit I want...
47_MasoN_47Thread starterNorthwest Alabama · Jul 16, 2013#42
Originally Posted by jRoss ↑
What size wheels/tires?
The wheels are 16", I can't remember if they are 16x6.5 or 16x7.5. The tires are 205/50/16.
47_MasoN_47Thread starterNorthwest Alabama · Jul 17, 2013#43
One skirt is done. 2 coats of primer, 4 coats of paint, 3 coats of clear.

The other skirt has 2 coats of primer and 2 coats of paint. I'll try to finish it up today if possible. Everyone in my family is out of town except me this week so I don't have anyone to help me install it though :(
47_MasoN_47Thread starterNorthwest Alabama · Jul 18, 2013#44
Finally got around to redoing a bunch of wiring under the dash. Rerouted all my boost wiring through conduit and then up under the carpet to the center console. Not related to this really, but since the car isn't drivable at the moment it was a good time.

TRS shipped my halos last night though, so hopefully I'll have some projectors installed this weekend.
47_MasoN_47Thread starterNorthwest Alabama · Jul 21, 2013#45
Will this housing being so close effect the cutoff any?

Picture not included in this copy
Picture not included in this copy
Kaotic LazagnaCentral Valley, CA · Jul 22, 2013#46
Cut off shouldn't be affected, but you may get a black spot(s) from where there should be light output closer to the car. Cut off is half way up the projector.
cali yarisCanoga Park, CA · Jul 22, 2013#47
might get hot too -- hard to tell.
BrianRiverside, CA · Jul 22, 2013#48
You'll be fine. Sedan headlights are too small for most projectors without a lot of work.
47_MasoN_47Thread starterNorthwest Alabama · Jul 22, 2013#49
Originally Posted by Brian ↑
You'll be fine. Sedan headlights are too small for most projectors without a lot of work.
Yeah, this whole process has been quite a bit of suck.

I stuck everything together just to see how it worked and this is what came out of it. I'm guessing that's not really how it's supposed to look.

Picture not included in this copy
cali yarisCanoga Park, CA · Jul 22, 2013#50
Are the projectors oriented correctly? and left one on the left?