Try reinstalling them. Maybe the rubber grommet/washer/spacer thing is twisted or something. They are pointed WAY too down.
Sedan GT Street Kit Install Thread (WIP)
85 posts · 23,351 views · page 2 of 2
Replies continued
Yeah the housing isn't actually mounted, it's just sitting in the car so I expected it to be pointed down. I just wasn't expecting that weird jaggy line.
The projector is oriented correctly, but I didn't see any indication of left/right.
The projector is oriented correctly, but I didn't see any indication of left/right.
There should not be a driver and passenger side projector. Only LHD and RHD projectors from what I've seen. What jaggy line? The step is the cut off, so that way you don't blind on coming traffic, and throw out more light towards the passenger side. Only problem I can see, now that you mentioned it was just sitting on the car, is trying to seat the bulb better. If the cut off bows up or down towards the ends, the bulb isn't seated as best that it can be. I'm not sure if it's just your driveway or not, but the left end looks like it's bowing upwards slightly. For me, that isn't a big issue since it's just slight (mine is like that too, and I got frustrated so I left it as it is now).
You can set it up like this where the driver and passenger side cut off's stack (has two "steps"):
Picture not included in this copy
Or the conventional overlapping way (has one "step"):
Picture not included in this copy
Picture not included in this copy
Or the conventional overlapping way (has one "step"):
Picture not included in this copy
Oh, so it's not supposed to be a straight line, it's supposed to have that drop in it?
The only projectors that I can think of having a driver and passenger side are the LS430/460 projectors since they utilize both a projector and a small reflective housing right under the projector to get maximum width and throw.
Yup. Should have a step like that. Now, if it was a downward step, then they would have accidentally shipped you a RHD projector 😆Originally Posted by 47_MasoN_47 ↑Oh, so it's not supposed to be a straight line, it's supposed to have that drop in it?
Ok well I've finally gotten the housings cut up sufficiently where I feel like I can permanently mount the projectors in there.
Picture not included in this copy
I seated the lights properly in the front of the car so that they aren't pointing directly at the ground this time.
Picture not included in this copy
It gets a nice cutoff (most of the light above the cutoff is just from the camera), but is way too low. I looked through my car's manual and couldn't find anything on headlight adjustment, but they need to be cranked up a fair bit.
Picture not included in this copy
Here's the view from inside the car showing why they need to be raised.
Low beam
Picture not included in this copy
High beam
Picture not included in this copy
So does anyone know how to adjust the headlights on the Yaris sedan?
Picture not included in this copy
I seated the lights properly in the front of the car so that they aren't pointing directly at the ground this time.
Picture not included in this copy
It gets a nice cutoff (most of the light above the cutoff is just from the camera), but is way too low. I looked through my car's manual and couldn't find anything on headlight adjustment, but they need to be cranked up a fair bit.
Picture not included in this copy
Here's the view from inside the car showing why they need to be raised.
Low beam
Picture not included in this copy
High beam
Picture not included in this copy
So does anyone know how to adjust the headlights on the Yaris sedan?
Turn the knobs on the back of the headlights to raise and lower. You can do it by hand or with a socket or screwdriver.Originally Posted by 47_MasoN_47 ↑So does anyone know how to adjust the headlights on the Yaris sedan?
Thanks Brian, I'll try that. I thought that's what that thing might have been but I didn't want to jack something up.
Also, if you can, rotate the projectors slightly counter clock wise as they're a bit crooked.
If you park parallel to a wall on a flat surface, adjust the headlights so they are slightly on a decline from being completely horizontal along the wall. Adjust either side, then re-park perpendicular to the wall, 50 ft would be good, farther the better (just not too far), and then adjust the other side so that it matches the side you adjusted parallel to the wall (with either way I mentioned a few posts back; single or double "steps").
If you park parallel to a wall on a flat surface, adjust the headlights so they are slightly on a decline from being completely horizontal along the wall. Adjust either side, then re-park perpendicular to the wall, 50 ft would be good, farther the better (just not too far), and then adjust the other side so that it matches the side you adjusted parallel to the wall (with either way I mentioned a few posts back; single or double "steps").
Alright, Yeah I'll try to rotate them some, unfortunately they turned a bit while I was tightening them up.
Thanks for the advice. These are setup to be used in that double step fashion. After I looked at the boxes for the projectors I noticed there is a specific one for the left and right, it's just labeled on the box and not the projector. Luckily I had kept up with which one was in which box!
Thanks for the advice. These are setup to be used in that double step fashion. After I looked at the boxes for the projectors I noticed there is a specific one for the left and right, it's just labeled on the box and not the projector. Luckily I had kept up with which one was in which box!
Yeah, tightening them is tricky. Just trial and error I guess since I don't really have a way to suggest. lol.
Double step, eh? Okay, parallel park with the passenger side towards the wall and aim so that it's horizontal. Then park perpendicular to the wall and adjust the driver side so that it creates that first step. ;)
Very odd. I wonder why it has a driver and passenger side since the cut offs look the same to me. I can see why there would be if the passenger side had a flare at it's right most end.
Double step, eh? Okay, parallel park with the passenger side towards the wall and aim so that it's horizontal. Then park perpendicular to the wall and adjust the driver side so that it creates that first step. ;)
Very odd. I wonder why it has a driver and passenger side since the cut offs look the same to me. I can see why there would be if the passenger side had a flare at it's right most end.
Got one finished.
Progress has been slow on everything in general. Lot of family stuff going on at the moment, work being busy, etc. Once this headlight junk is finished and the car is drivable again, I'll spend some more time looking for the best way to mount those side skirts.
Picture not included in this copy
Progress has been slow on everything in general. Lot of family stuff going on at the moment, work being busy, etc. Once this headlight junk is finished and the car is drivable again, I'll spend some more time looking for the best way to mount those side skirts.
Picture not included in this copy
status???
Agreed, my first choice would be match it up to the body colour 100% to make it look OEM.Originally Posted by cali yaris ↑Matching the wheels (gun metal) or body color are best.
The only other option would be the dark grey, to match the wheels as stated, but personally I'd match up the factory colour.
the shrouds on your projectors, are they the Gatling gun or the mini Gatling gun?
were about to do the same thing. but we are doing the mini's
were about to do the same thing. but we are doing the mini's
I will shoot Jason an email or a call to get an update.
The shrouds are mini gatling gun. The full size gatling gun wouldn't even fit in the sedan housing at all haha.
Sorry about the lack of updates. The 2 skirts are 100% ready for install and the front piece is about 80% sanded getting ready for primer. I've had a lot going on with family stuff and then catching up on some work the truck needed. Since the Yaris is running again I've mostly just been driving it instead of doing more work haha. The interior is all torn apart where I've been installing that new head unit I got from a member here. That thing is awesome but I've got some wiring work to do to get it to work with the custom ports I'd added with the last HU.
Sorry about the lack of updates. The 2 skirts are 100% ready for install and the front piece is about 80% sanded getting ready for primer. I've had a lot going on with family stuff and then catching up on some work the truck needed. Since the Yaris is running again I've mostly just been driving it instead of doing more work haha. The interior is all torn apart where I've been installing that new head unit I got from a member here. That thing is awesome but I've got some wiring work to do to get it to work with the custom ports I'd added with the last HU.
Common man, post some finished pictures. Your car is one of the most interesting sedans out there.
Well, about the time I was going to get balls deep in this project again my grandad's health took a turn for the worst. He passed away last weekend. That kindof derailed my work for a bit, but I should get the front piece finished this week. The rear part needs a little fitting work, so I'm not going to paint that until I figure out how I want to go about fitting that properly, but I should be able to get the front and skirts installed.
Got a lot of work to do on the interior getting the new radio wired up right and adding some ports and whatnot. Also, after talking with Kaotic I think I'm going to paint some of the panels on the interior to match the lip kit. Should look pretty good when it's done.
This is certainly taking a lot more time than I planned, but with painting weather quickly fading I've been trying to finish up a bunch of work on the truck as well. I didn't get near as much done this summer as I wanted, but I guess that's how it goes.
When I bought this light rail it was pink and had about 5 layers of paint underneath that. Sanding all that junk off and then getting it primed/painted took a good bit of work, but I wanted to finish that before the winter so I could go ahead and get the lights mounted. The lighting on this truck is horrid. Those old sealed beams aren't worth a fart in a jar and the reverse lights literally do nothing other than tell other people that you're in reverse.
Picture not included in this copy
Got a lot of work to do on the interior getting the new radio wired up right and adding some ports and whatnot. Also, after talking with Kaotic I think I'm going to paint some of the panels on the interior to match the lip kit. Should look pretty good when it's done.
This is certainly taking a lot more time than I planned, but with painting weather quickly fading I've been trying to finish up a bunch of work on the truck as well. I didn't get near as much done this summer as I wanted, but I guess that's how it goes.
When I bought this light rail it was pink and had about 5 layers of paint underneath that. Sanding all that junk off and then getting it primed/painted took a good bit of work, but I wanted to finish that before the winter so I could go ahead and get the lights mounted. The lighting on this truck is horrid. Those old sealed beams aren't worth a fart in a jar and the reverse lights literally do nothing other than tell other people that you're in reverse.
Picture not included in this copy
my condolences. yeah you need to do it soon. weather there's not like here wherein even if it's rain season you get pretty decent paint weather/sunshine on the days when rain isn't pouring.
Alrighty, got the interior trim pieces primed and a few of them painted yesterday. Finished the prep work on the front bumper piece and bought some more primer during lunch so I should be able to get it primed and maybe shoot one coat of color on it today. Yanked the A-pillar a few days ago and ran the bluetooth mic for the DEH-80PRS up the a pillar and through the dash. Fixed my freaking dash kit again as the lower tab on the driver's side broke. This time I reinforced it with aluminum sheeting and steel wire. If it breaks this time I'm just going to leave it.
Picture not included in this copy
Got the front piece on :) It looks great and fit really well. It was tight enough that it probably would have stayed on without reinforcement, but I drilled a few holes along the inside of the wheel well and zip tied it for extra security. I may do a few more if I see any signs of stress on the ones I put on. I'm going to try to get at least one skirt on tomorrow :)
Got the front piece on :) It looks great and fit really well. It was tight enough that it probably would have stayed on without reinforcement, but I drilled a few holes along the inside of the wheel well and zip tied it for extra security. I may do a few more if I see any signs of stress on the ones I put on. I'm going to try to get at least one skirt on tomorrow :)
doggy stance is cute, too.
lookin good bud
Missy is the best partner to have along on projects :)Originally Posted by yarisugi ↑doggy stance is cute, too.
I got one skirt on. I'll have to try to take better pictures tomorrow. It was dark by the time I finished.
Picture not included in this copy
Picture not included in this copy
now you need the eyelids! either way, looks really cool
Personally I think that you should stay away from eyelids Jas...IN think they look tacky in daylight, but that might be just me.
Yeah I like the projectors the way they are :)
It was rainy out but I got some better pictures today.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
makes me want to order that front too!
Hey man, just a curious question, how were the side skirts installed? Did they have holes on the underside where you can put clips on?
I'm not sure how the underside of our sedans look, but the more i google the more it seems it's only on the hatchback that the side skirts have holes (and the body too).
if you have pictures of the side skirts before you installed them i would love to see them.
great build btw!👍
I'm not sure how the underside of our sedans look, but the more i google the more it seems it's only on the hatchback that the side skirts have holes (and the body too).
if you have pictures of the side skirts before you installed them i would love to see them.
great build btw!👍
You forgot to paint it blue...