wildmongoose26Original postDallas, TX · Mar 24, 2013#1Got everything buttoned up last night. Clutch engages, etc. Builds boost, no leaks.
At idle we run 14.5 A/F so that's normal.
The light on the dial lights up when we get into boost and not vacuum. Normal.
The light on the fuel controller box does not light up at all. Not sure if it is supposed to be on ALL the time or if its only supposed to come on while in boost like the light on the dial.
In boost in stays roughly around 14.5 but that is just in the air, not while driving.
Any advise?
Is the light on the fuel controller supposed to be on all the time?
Angela
Replies 20
CTScottUSA, CT · Mar 24, 2013#2 Originally Posted by
wildmongoose26 ↑ Got everything buttoned up last night. Clutch engages, etc. Builds boost, no leaks.
At idle we run 14.5 A/F so that's normal.
The light on the dial lights up when we get into boost and not vacuum. Normal.
The light on the fuel controller box does not light up at all. Not sure if it is supposed to be on ALL the time or if its only supposed to come on while in boost like the light on the dial.
In boost in stays roughly around 14.5 but that is just in the air, not while driving.
Any advise?
Is the light on the fuel controller supposed to be on all the time?
Angela
The light on the little switch assembly should light when the clutch is engaged by the fuel controller.
wildmongoose26Thread starterDallas, TX · Mar 24, 2013#3But only when its engaged? Not constant?
Both the light on the dial and on the fuel controller box?
CTScottUSA, CT · Mar 24, 2013#4 Originally Posted by
wildmongoose26 ↑ But only when its engaged? Not constant?
Both the light on the dial and on the fuel controller box?
My fuel controller doesn't have a light on it, just the dial does. And, the light on the dial just comes on when the SC is engaged.
wildmongoose26Thread starterDallas, TX · Mar 25, 2013#5That light works. The A/F seems a bit off. Going to look at it a bit more tomorrow.
Everything engages, drove the car and A/F goes down to 12.5 after a little while. But its a dial type gauge from Glowshift so it may just react a little slowly.
wildmongoose26Thread starterDallas, TX · Mar 25, 2013#6180 degrees from the stock o2 sensor and put the gauge under the HVAC controls
wildmongoose26Thread starterDallas, TX · Mar 25, 2013#7I have no idea how the pictures are relevant
1.5Tampa · Mar 25, 2013#8Now you know he's boosted too
cali yarisCanoga Park, CA · Mar 25, 2013#9 But its a dial type gauge from Glowshift so it may just react a little slowly.
narrowband or wideband?
wildmongoose26Thread starterDallas, TX · Mar 25, 2013#10Wideband
cali yarisCanoga Park, CA · Mar 25, 2013#11Does 180 degrees mean the two sensors are pointing at each other in exactly the same place inside the pipe?
wildmongoose26Thread starterDallas, TX · Mar 25, 2013#12Bot at each other. But in the same area of pipe yes. Too close would be weird an restrict air alot in that one place.
wildmongoose26Thread starterDallas, TX · Mar 26, 2013#13Finished. Everything works. Correct a/f the dhole way under boost. Idle a/f is perfect. Engages when it should according the the dial. It was a wiring problem. Used t taps like it said to and they almost cute the wires to the ecu. Had a friend solder them and its perfect can't even tell there is any extra wiring!!
1.5Tampa · Mar 26, 2013#14awesome great news. Lets see some vids now. Any plan for dyno/tune?
wildmongoose26Thread starterDallas, TX · Mar 26, 2013#15Not yet on the tune. Got a few things in the works for this year. Gotta find a good deal on boomslang and AEM.
1.5Tampa · Mar 26, 2013#16Oh very nice I thought you had that as well already. djgab101 who had the zage kit for sale had the combo for sale as well but i just checked and it looks like mazilla picked those up. Hope you find another good deal
wildmongoose26Thread starterDallas, TX · Mar 26, 2013#17Ya. The added 20+ HP would be nice but wanna pick up the rest of the performance stuff at the same time. Midpipe, header, tb, fuel rail, injectors so its 1 tune and done
1.5Tampa · Mar 26, 2013#18 Originally Posted by
wildmongoose26 ↑ Ya. The added 20+ HP would be nice but wanna pick up the rest of the performance stuff at the same time. Midpipe, header, tb, fuel rail, injectors so its 1 tune and done
Yea that makes it all easier. Are you planning on running a 1zztb? Just in case you might want to read through this thread of someone who was trying to do the same, it might not be worth the required customization.
1zz Tb on a blitz supercharger ... Any good ? The bolt ons and tune will really free up a lot. You thinking of running 1zz injectors?
wildmongoose26Thread starterDallas, TX · Mar 26, 2013#19Just to be safe ya. If its required. I think doing extra tuning with the blitz it's recommended anyway
1.5Tampa · Mar 26, 2013#20 Originally Posted by
wildmongoose26 ↑ Just to be safe ya. If its required. I think doing extra tuning with the blitz it's recommended anyway
Ive heard some people run lean some dont so Im doing the 1zz injectors just in case and hell yea I will absolutely tune mine too. Otherwise you gain like 20-30 whp if youre lucky. With a tune you could see gains closer to like 40whp. For the amount of money the kit costs, I want all I can get out of it lol
wildmongoose26Thread starterDallas, TX · Mar 27, 2013#21Video is up. Made a post in the rides area