vtenOriginal postcolumbus · Feb 19, 2013#1Reading the manifold thread , most ppl added the 1zz TB .... I was wondering If I should add the 1zz th for my fixed pulled blitz supercharger ....
Any thought ?
Thanks guys
Replies 65
tooterLos Angeles · Feb 19, 2013#2Hey vten, 🙂
In my opinion, you'd have throttle response up the ass. 👍
Even running non aspirated...
Picture not included in this copy
...I can cruise down the freeway at 65 with just my big toe resting on the gas pedal. Your forced induction could only multiply that advantage even more. The real question is... how big is the bore on your Blitz? a 1ZZ is 55mm.
Greg
vtenThread startercolumbus · Feb 19, 2013#3I have no idea on the blitz bore .... But I'll find out :)
CrankyOldManWest Michigan · Feb 19, 2013#4Good question. I don't know that it would make much of a difference in output (without a standalone ECU) but it would certainly improve pedal response.
vtenThread startercolumbus · Feb 19, 2013#5Hmmm yeah ..... Since I have it tuned with the AEM FIC, do you think re-tune would be needed ?
CrankyOldManWest Michigan · Feb 19, 2013#6That's tough to say. If you have an AFR gauge and it's showing lean at WOT, then I would recommend a re-tune.
CrankyOldManWest Michigan · Feb 27, 2013#7Ok, having looked at the mating interface between the Blitz and the TB, I don't think that you would get much out of a 1ZZ throttle body. Reason being, the inlet on the Blitz is sized to the 1NZ, so you'd have a nasty step down in diameter and likely have issues holding the gasket in place. If you know someone with welding skills that could do a cast-to-plate joint, you could make your own adapter. Maybe.
tooterLos Angeles · Feb 27, 2013#8Can you post a pic of your inlet, Cranky? What about simply grinding out the bore to a larger diameter? Then the only issue would be making a gasket for the 1ZZ throttle body. I had a 2mm step on mine and just took a Dremel to it to make it work by rounding off the sharp edge. 🙂
Picture not included in this copy
CrankyOldManWest Michigan · Feb 27, 2013#9It looks pretty much identical to the one you posted, but with the 1NZ gasket channel.
tooterLos Angeles · Feb 27, 2013#10 Originally Posted by
CrankyOldMan ↑ It looks pretty much identical to the one you posted, but with the 1NZ gasket channel.
Yes, it does...
The difference is that this one matches the 51mm bore of the 1ZZ manifold all the way through while the other one tapered out from the 46mm 1NZ bore to match the 51mm.
When Toyota went from the Corolla 3 bolt throttle body to the 4 bolt, they also increased the bore diameter from 51mm to 55mm, so there was a 2mm step around the edges which got smoothed out with a grinder.
AstromanWenatchee, WA · Feb 27, 2013#11I my 1zz TB. Just need a supercharger to go with it. 😁
47_MasoN_47Northwest Alabama · Feb 28, 2013#12I'd be interested in this. It would be nice to have a better throttle response.
CrankyOldManWest Michigan · Mar 3, 2013#13Finally spent some time with the Blitz, the 1ZZ throttle body corpse and a camera today.
Picture not included in this copy
My suspicions were confirmed: the intake flange is only sized for the 1NZ throttle body. There's an awful nasty step and potentially exposure of the gasket itself.
Picture not included in this copy
There isn't really room to modify the existing flange, because it's only about 1/2" thick.
Picture not included in this copy
The casting is also very thin, and not very smooth inside.
Picture not included in this copy
47_MasoN_47Northwest Alabama · Mar 3, 2013#14That's unfortunate.
tooterLos Angeles · Mar 3, 2013#15 Originally Posted by
CrankyOldMan ↑ Finally spent some time with the Blitz, the 1ZZ throttle body corpse and a camera today.
Picture not included in this copy
My suspicions were confirmed: the intake flange is only sized for the 1NZ throttle body. There's an awful nasty step and potentially exposure of the gasket itself.
Picture not included in this copy
Yeah, I had that same issue with the very first prototype adaptor.
You could still make an adaptor plate that smoothly reduces to the stock diameter. You already have the perfect pattern. It's on the bottom of your 1ZZ throttle body. 👍
I'd just drill 4 slightly larger non threaded holes 60mm square in some aluminium plate and get some longer throttle body studs to hold everything together and use a stock O ring gasket under the adaptor. You could then make a stock diameter bore hole in the center of the adaptor to fit your supercharger, and then file or Dremel it to flare out to the larger 1ZZ diameter at the top. You'd need to cut out a flat gasket for the throttle body to get around needing to groove it for an O ring, but it wouldn't be all that difficult to do.
Remember, this isn't just the engine passively pulling in air. It's the supercharger
pumping it in. And ok, so there will be a slightly higher manifold vacuum in front of the supercharger, it would still be the larger throttle body that's metering the air. 🙂
CrankyOldManWest Michigan · Mar 4, 2013#16 Originally Posted by
tooter ↑ You could still make an adaptor plate that smoothly reduces to the stock diameter. You already have the perfect pattern. It's on the bottom of your 1ZZ throttle body. 👍
That would be the next logical step, but I was thinking from the "bolt-on" side of the garage. Not everyone has access to the facilities that we do. =)
A few alternatives (of varying feasibility) would be: buy a 50mm throttle body spacer and turn/grind the taper; scavenge the intake side of an xB kit and use the tooter TB flange; scavenge the intake side of an xB kit and make your
own elbow/flange; learn to do lost-wax investment casting and make your own; etc. etc.
47_MasoN_47Northwest Alabama · Mar 4, 2013#17 Originally Posted by
CrankyOldMan ↑ That would be the next logical step, but I was thinking from the "bolt-on" side of the garage. Not everyone has access to the facilities that we do. =)
Thanks for that :) I don't have the tooling to do much more than open the box and bolt parts on. If it requires milling/lathing/etc. I'm just SOL.
vtenThread startercolumbus · Mar 4, 2013#18If possible, cranky or tooter , are you guys mind to make the adapter from the blitz to the 1zz tb ?
tooterLos Angeles · Mar 4, 2013#19 Originally Posted by
vten ↑ If possible, cranky or tooter , are you guys mind to make the adapter from the blitz to the 1zz tb ?
I could but sorry, I've already got my hands full making tooters. This is just one of the hobbies I do for fun in my spare time when I'm not doing my regular work.
Why not simply go to a non-CNC machinist? It's just a simple square piece of aluminium with 5 holes drilled in it. You could make your own tapered bore with a half round hand file and some sandpaper, and buy some longer metric bolts to hold everything together. I port match my flanges with a 30 year old Dremel and sandpaper...
Picture not included in this copy There's another slightly more involved alternative. Cut off the existing flange with a hacksaw and have a welder weld a plate onto the casting. It's just soft aluminium. I had considered doing this on the tooters but it added an extra production step and more cost.
47_MasoN_47Northwest Alabama · Mar 4, 2013#20Since the intake on the blitz is smaller than the diameter of the 1zz TB anyway, will there be enough of a benefit to justify the labor required to make these adaptors?
tooterLos Angeles · Mar 4, 2013#21 Originally Posted by
47_MasoN_47 ↑ Since the intake on the blitz is smaller than the diameter of the 1zz TB anyway, will there be enough of a benefit to justify the labor required to make these adaptors?
There's only one way to find out for sure. 😉
In my opinion it would work because the intake is not passive.
The supercharger is actively pumping air creating pressure in the head rather than the normally aspirated vacuum. So it's actively pulling in air through the intake casting and the throttle body. The butterfly in the throttle body is what controls the engine speed through metering the intake air. So a larger butterfly can meter more air. Even though the intake is smaller, the air will move at a higher velocity and at a higher manifold vacuum.
47_MasoN_47Northwest Alabama · Mar 4, 2013#22I'll definitely be interested to see what comes of this.
tooterLos Angeles · Mar 4, 2013#23 Originally Posted by
47_MasoN_47 ↑ I'll definitely be interested to see what comes of this.
Don't hold your breath, mason. 😉
CrankyOldManWest Michigan · Mar 5, 2013#24I'll be back on the engineering campus this summer, so it would be fairly easy for me to fab up an adapter plate. I'm also going to talk to the prof. in charge of the casting equipment to see if I can learn how to use it.
47_MasoN_47Northwest Alabama · Mar 5, 2013#25I'd like to hear CTScott's take on this. He's been running a S/C for a while now.
vtenThread startercolumbus · Mar 5, 2013#26Definitely interested with the adapter , cranky. Hook a brother up :)
tooterLos Angeles · Mar 5, 2013#27 Originally Posted by
CrankyOldMan ↑ I'll be back on the engineering campus this summer, so it would be fairly easy for me to fab up an adapter plate. I'm also going to talk to the prof. in charge of the casting equipment to see if I can learn how to use it.
Do it, Cranky. 🙂
Heck, you could do it with just a drill press, a hack saw, and a hand file. 👍
47_MasoN_47Northwest Alabama · Mar 5, 2013#28lol, I've made a few small gun parts with hand files... I can't even imagine how much work one of these would be.
tooterLos Angeles · Mar 5, 2013#29Aluminium is soft and really easy to work with, and the supercharger adaptor is just a piece of metal with some holes in it. I'm already hacking up a manifold just to see what will happen... 😉
cali yarisCanoga Park, CA · Mar 5, 2013#30^ agreed. Super easy to make an ugly one just to test it.
CrankyOldManWest Michigan · Mar 5, 2013#31 Originally Posted by
tooter ↑ Do it, Cranky. 🙂
Heck, you could do it with just a drill press, a hack saw, and a hand file. 👍
Agreed, though I would have a hard time using anything less than a knee mill. All of this of course pivots on me getting another 1ZZ TB, since the first one was given an autopsy to see how it goes together.
CrankyOldManWest Michigan · Mar 18, 2013#32Looks like TOLMACH went and put an xB supercharger on his, and used the Tooter TB adapter to make it fit: Link to a thread or page that is not in the archive
CrankyOldManWest Michigan · Jun 13, 2013#33Some musings in CAD. I've got a block of 6061 in mind for this, just have to make time in the shop for it...
Picture not included in this copy
tooterLos Angeles · Jun 13, 2013#34While most of my concepts never make it to reality, this 1ZZ bellmouth adaptor actually did. It's 2 inches thick so there's plenty of material work with. And lots of room to drill a hole in the side to add the breather hose fitting.
$185 including shipping. 🙂
When I had one made for the experimental tooter et, I also made one extra just to see if there would be any interest in a Blitz 1ZZ Adaptor.
Picture not included in this copy
CrankyOldManWest Michigan · Jun 13, 2013#35My goal with this design is to use a 90° silicone reducing elbow (2.5" -> 2.25" or 2.0") or something of that sort to connect to the Blitz. I think that the xB intake tube would be ideal, since it's already cut and round, but convincing someone to swap could be difficult.
tooterLos Angeles · Jun 13, 2013#36An adaptive slip on coupling is a good idea, Cranky. 👍 I had only thought of whacking off the throttle body base and welding on another one. Be sure to post some pics when you get it made. 🙂
47_MasoN_47Northwest Alabama · Jun 13, 2013#37I'd definitely 1zz my Blitz if there was a way to make it bolt on.
tooterLos Angeles · Jun 13, 2013#38 Originally Posted by
47_MasoN_47 ↑ I'd definitely 1zz my Blitz if there was a way to make it bolt on.
I'm not familiar with what your clearances are. Would bolting something additional onto the top of your throttle body base cause issues if the throttle body's position was raised up higher?
CrankyOldManWest Michigan · Jun 14, 2013#39 Originally Posted by
tooter ↑ When I had one made for the experimental tooter et, I also made one extra just to see if there would be any interest in a Blitz 1ZZ Adaptor.
I woke up this morning thinking about how this would work, and I think it may be slightly too big. I measured the neck of the Blitz at some point, but I've forgotten the exact dimension. I'm thinking 54mm O.D., but that seems awful small if the I.D. is 52mm. I'll have to take the calipers out to the car and measure it again.
47_MasoN_47Northwest Alabama · Jun 14, 2013#40 Originally Posted by
tooter ↑ I'm not familiar with what your clearances are. Would bolting something additional onto the top of your throttle body base cause issues if the throttle body's position was raised up higher?
It just depends on how much higher it would be...
tooterLos Angeles · Jun 14, 2013#41 Originally Posted by
CrankyOldMan ↑ I woke up this morning thinking about how this would work, and I think it may be slightly too big. I measured the neck of the Blitz at some point, but I've forgotten the exact dimension. I'm thinking 54mm O.D., but that seems awful small if the I.D. is 52mm. I'll have to take the calipers out to the car and measure it again.
The bore diameter of the adaptor/bellmouth is straight 55mm, exactly the same as the 1ZZ throttle body.
Picture not included in this copy The bore diameter of the Blitz intake should be at least 46mm to fit the 1NZ throttle body. So there would need to be a perimeter transition of 4.5mm, or slightly less than 3/16 of an inch. That's how much the Blitz runner would need to be flared out at the end. It would leave a thin outer edge which would slip fit up inside the tapered bellmouth curve. It would then be needed to be welded from the outside.
If less than 2 inches were cut off of the Blitz runner, the adaptor would make up that difference, and the 1ZZ throttle body would end up in the same place as the 1NZ.
CrankyOldManWest Michigan · Jun 14, 2013#42OK, here's a little better info: I measured the intake at 2.06-2.07", meaning 52-52.5mm OD. Looks like the bellmouth would need another spacer or have to be flared.
The good news is that a 2.5" -> 2" silicone coupler would allow my bracket to fit, but it would need another mounting point for the radiator hose. I'm still thinking that the xB intake tube would be the best way to make it happen since it is round all the way at the top instead of all squashed like ours.
tooterLos Angeles · Jun 14, 2013#43[quote=CrankyOldMan;702651]OK, here's a little better info: I measured the intake at 2.06-2.07", meaning 52-52.5mm OD. Looks like the bellmouth would need another spacer or have to be flared.
Wow... that's
really small. 😲
The good news is that a 2.5" -> 2" silicone coupler would allow my bracket to fit, but it would need another mounting point for the radiator hose. I'm still thinking that the xB intake tube would be the best way to make it happen since it is round all the way at the top instead of all squashed like ours.
Your silicone adaptor idea is much better! 👍
By the way what is an "xB intake tube"? Can you post a pic of one?
CrankyOldManWest Michigan · Jun 14, 2013#44 Originally Posted by
tooter ↑ By the way what is an "xB intake tube"? Can you post a pic of one?
After looking at more images, it would still have to be altered to point in the right direction, but it could be easier than making one from scratch.
Picture not included in this copy Picture not included in this copy Picture not included in this copy 47_MasoN_47Northwest Alabama · Jun 14, 2013#45Did you measure the diameter on an XB kit or a Yaris kit? I know the Yaris has a single piece pipe thing that comes off the top of the supercharger where the XB kit has that split one. I wonder if they might be different diameters?
CrankyOldManWest Michigan · Jun 14, 2013#46 Originally Posted by
47_MasoN_47 ↑ Did you measure the diameter on an XB kit or a Yaris kit? I know the Yaris has a single piece pipe thing that comes off the top of the supercharger where the XB kit has that split one. I wonder if they might be different diameters?
I measured mine from my Yaris kit. As far as I know, the TB bore is the same, so the blitz runner bore should be the same. I can't tell from the images if the lower half of the runner looks bigger or not, so the OD is unknown unless you can get an xB owner to measure theirs.
tooterLos Angeles · Jun 14, 2013#47With in inside diameter of 46mm and an outside diameter of ~52mm the Blitz intake must be an extremely thin casting to have walls that are only 3mm thick. That's tubing thickness. I'm wondering how they were able to pour aluminium into such a thin casting without leaving porous pockets.
CrankyOldManWest Michigan · Jun 14, 2013#48It's a very strange casting, indeed. You can see lots of seams inside from the different sections of the wax master that were never smoothed out, like bad concrete foundations.
CrankyOldManWest Michigan · Jun 23, 2013#49While waiting for my engine to cool off enough to change the oil yesterday, I installed my injen CAI. Some interesting things to note:
* The stock throttle body is TINY compared to the 1ZZ.
* The injen intake isn't a suitable donor for a 1ZZ due to the diameter of the mating end and the limited space to clamp a silicone coupler near the MAF mount.
* Finding an inexpensive aftermarket intake to scavenge a MAF section from is difficult, now that the Simota is not readily available.
* Finding an off-the-shelf 2.25" MAF section is pretty much not going to happen.
* Putting an intake on a supercharged engine makes for some really silly noises.
* There is a LOT of room to get creative in there, provided you can do all the silliness where the OEM intake was--not much clearance at the top of the S/C.
Correction: this may be a suitable alternative source for a MAF section, assuming you can deal with a 3" body:
http://www.spectreperformance.com/in...apter-kit.html JustDidItUnited States · Jun 25, 2013#50 Originally Posted by
CrankyOldMan ↑
You could hack up this eBay
intake kit for the MAF housing - verified its 2.25" I tried the Spectre 3" MAF - immediately threw a CEL - MAF out of range. Unless you can modify this setting with the ECM - 3" is just too big for the 1.5.