Yarisworld Archive

AT fluid change earlier than 100k miles

24 posts · 13,351 views

hw6515Original postU.S · Mar 9, 2013#1
I have read all the posts regarding interval for the maintenance in the AT.

Also noted this is an issue that most can't agree, but after opening the transmission in my car I wish I had done it earlier.

The magnets in the pan were completely covered with particles and it's obvious that the filter was saturated.

For my driving habits and conditions even 50k was probably to much.

Current miles are 8xK, one owner only.
IMAG0595.jpgIMAG0596.jpgIMAG0597.jpgIMAG0598.jpgIMAG0599.jpgIMAG0600.jpgIMAG0607.jpgIMAG0610.jpgIMAG0606.jpgIMAG0603.jpg

Replies 23

UberSilverAlameda,Ca. · Mar 9, 2013#2
It's still red. But with the small amount of fluid one can get out of it, I'll be doing mine every other year. I've got 82K and everything looked clean the last time I change it.

I still cant find any spark plugs on mine😁😁😁!
hw6515Thread starterU.S · Mar 9, 2013#3
Originally Posted by UberSilver ↑
It's still red. But with the small amount of fluid one can get out of it, I'll be doing mine every other year. I've got 82K and everything looked clean the last time I change it.

I still cant find any spark plugs on mine😁😁😁!
I wish I could say the same, nothing was clean in there.

Yeah only the GT version come with those in the transmission 🙄
Hersheynortheast · Mar 9, 2013#4
A friend had his WS auto tranny fluid of his '10 3 door changed at 100,000 miles and no issues . Now has over 130,000+ plus miles .
UberSilverAlameda,Ca. · Mar 10, 2013#5
Originally Posted by Hershey ↑
A friend had his WS auto tranny fluid of his '10 3 door changed at 100,000 miles and no issues . Now has over 130,000+ plus miles .
Have you heard of a better fluid, that one can buy in a store?

I would normally try RedLine in my cars, but I heard some negative about it in the Yaris AT. Also talked with Dave at RL, and he even told me they have nothing the 100% correct to replace the WS type fluid, but said the D4 is close.

I dont want close. I use the RL ATF D4 in my 88 Land Cruiser, and it's Fantastic!

But I dont want to take any risk with my cut little Yaris AT.😳
hw6515Thread starterU.S · Mar 10, 2013#6
I went to the stealership and got ATF WS. Saves me the hassle of finding out what's what. If I had to use something other than OEM would probably try AMSOIL.
bronsinnj · Mar 10, 2013#7
I gave my 86 Chevy Silverado to my brother in law 15 years ago when it had ~200k miles on it. It has almost 400k on it now.

Auto trans.

Same fluid as the day I bought it.

The "dirt" in your pictures is meaningless.
hw6515Thread starterU.S · Mar 10, 2013#8
Originally Posted by bronsin ↑
I gave my 86 Chevy Silverado to my brother in law 15 years ago when it had ~200k miles on it. It has almost 400k on it now.

Auto trans.

Same fluid as the day I bought it.

The "dirt" in your pictures is meaningless.
Apples......Oranges.......ahhh forget it.
hw6515Thread starterU.S · Mar 10, 2013#9
Took the car for a long city-hwy test and the shifting has improved greatly.

I stand by my comments, 50k for my driving habits was probably the limit.
hw6515Thread starterU.S · Mar 10, 2013#10
Decided to check the valves and clean the intake manifold as part of the 80k maintenance I been doing, and found one valve completely covered in carbon.

It happens to be the one close to the PCV valve return. Maybe the oil catch filter is not such a bad idea after all.

all other intake ports and valves were clean.
IMAG0631.jpgIMAG0635.jpg
Hersheynortheast · Mar 10, 2013#11
You for hire ? Nice work . 👍
Hersheynortheast · Mar 10, 2013#12
I think AMSOIL has a auto tranny fluid that replaces the WS . Some say the Wal-Mart tranny fluid has approval for use . Might be stated on the back of the bottle . I'd stick to the WS .
hw6515Thread starterU.S · Mar 10, 2013#13
^ Yeah AMSOIL have good products, but I usually stick to the LHF (Low hanging fruit) and get the stuff that works.

Originally Posted by Hershey ↑
You for hire ? Nice work . 👍
Any time, swing by and bring parts ;)
bronsinnj · Mar 11, 2013#14
Hmmm have you checked the clearances and if so, how were they? 🤷

Carbon on one valve next to the PCV valve:

1) Do other engines have this thing?

2) If not why is yours spewing so much oil the valve got carboned?

3) maybe we all need oil catchers.
hw6515Thread starterU.S · Mar 11, 2013#15
Hmmm have you checked the clearances and if so, how were they? 🤷
It was only a visual inspection with an endoscope from the intake port.

Carbon on one valve next to the PCV valve:

1) Do other engines have this thing?
Hard to say, but if oil goes in to the intake port, it will burn and leave carbon residue.

2) If not why is yours spewing so much oil the valve got carboned?

Some here and in other boars I frequent have reported oil in the PCV system, to some degree unless it's vented it to the atmosphere it is possible that oil gets sucked into the intake.

3) maybe we all need oil catchers.
It seems that way.

If anyone is interested, here is a short video of that valve.

https://s3.amazonaws.com/core-storag.../VIDEO0032.mp4

The idea for the oil catch filter came from:
$30 Oil Catch Can, DIY

Homedepot parts info:

(Two) Amflo 1/4 in. MNPT x 3/8 in. I.D. Barbed Hose Fitting

Model # 406LD-RET
Store SKU # 585055

(One) Husky 1/4 in. Air Compressor Filter
Model # HDA70403AV
Internet # 100027474
Store SKU # 401910

Teflon tape.
Hose Clamps.
hw6515Thread starterU.S · Mar 11, 2013#16
Ill be sending a sample of the 80k miles ATF to the guys at Blackstone Labs. I will update this thread when I receive the results.
hw6515Thread starterU.S · Mar 16, 2013#18
Received the sample kit from Blackstone Labs, I will be sending the sample on Monday.

Saw several threads about PCV replacement, bellow the part number for it, and some other items I have replaced as part of the 80k maintenance.
IMAG0639.jpgIMAG0641.jpgIMAG0635.jpgIMAG0636.jpg
hw6515Thread starterU.S · Mar 16, 2013#19
Pretty much done with the 80k miles maintenance.

Items replaced so far:
Water pump, water pump pulley and belt.
Shocks and springs >>> tokicos red in the front, blues in the back with MR springs.
PCV valve.
8Qts ATF + Transmission filter. (in two steps, 4qts at a time)
Spark plugs.
Fusible link, + and - battery connectors.

Added:
Oil catch filter.

Cleaned:
Intake Manifold.
1 Valve.
Absolutely Red 12Your moms house. · Mar 17, 2013#20
The "dirt" is clutch pack material, pretty normal.

A UOA on ATF is pretty meaningless, as there really is no much oil breakdown due to no exhaust blow-by infecting the oil.No pistons scraping cylinder walls, causing metal shavings.
The fluid pretty much is used for fluid pressure, and to keep bands, and clutch packs lubed, that's why it can go 100K miles.
hw6515Thread starterU.S · Mar 21, 2013#21
Gasket part number for transmission and oil plug.
trans.jpgoil.jpg
hw6515Thread starterU.S · Mar 25, 2013#22
The oil catch filter does work, less than 1k miles at the time of the pic.

ATF looks clean also, if now the transmission last 50k more miles it wont be wasted time and effort.🙄
IMAG0714.jpgIMAG0711.jpg
why?harnett county NC · Mar 25, 2013#23
Originally Posted by Yarflana ↑
This may have been previously stated, but I didn't see anywhere in my manual for my 2008 Hatch base model on how to check the transmission fluid level, or anything like that. Would that imply is doesn't need changing according to Toyota?

I guess I would need to look at the required maintenance services intervals and see if it indicates a change is required.
yea technically Toyota says the transmission fluid should last the life of the car. That is total bs. It'll last about 60k at most, then you should change it.