Yarisworld Archive

1zz Tb on a blitz supercharger ... Any good ?

66 posts · 23,824 views · page 2 of 2

Replies continued

tooterLos Angeles · Jun 25, 2013#51
Originally Posted by JustDidIt ↑
You could hack up this eBay intake kit for the MAF housing - verified its 2.25"

I tried the Spectre 3" MAF - immediately threw a CEL - MAF out of range. Unless you can modify this setting with the ECM - 3" is just too big for the 1.5.
Now, that is one hell of a deal for only 44 bucks and free shipping! 👍

Picture not included in this copy

It's well worth it, if only just to get a MAF section.
CrankyOldManWest Michigan · Jun 25, 2013#52
Originally Posted by JustDidIt ↑
You could hack up this eBay intake kit for the MAF housing - verified its 2.25"
I don't see any info on it being 2.25. Did you verify it yourself, or are you saying "if it's verified"?

I tried the Spectre 3" MAF - immediately threw a CEL - MAF out of range. Unless you can modify this setting with the ECM - 3" is just too big for the 1.5.
Was that with the 2.25" 'calibration tube'? Was it by chance P0103? I threw one of those today when I went through a rather deep puddle and splashed the filter. Scared me pretty good.
CrankyOldManWest Michigan · Jun 25, 2013#53
Originally Posted by tooter ↑
Now, that is one hell of a deal for only 44 bucks and free shipping! 👍

It's well worth it, if only just to get a MAF section.
Agreed, it's a great deal for the tube. The rest looks like junk. Went ahead and got one.
tooterLos Angeles · Jun 25, 2013#54
And save the other pieces...
With careful cutting and straight silicone couplings you could create any custom shape intake you wanted. 👍

edit: Just checked the seller's feedback and couldn't find any negatives for that intake. And they sell at least 2 of them a month.
CrankyOldManWest Michigan · Jun 25, 2013#55
Considering that a MAF flange alone is almost $40, and tubing another $20, this makes an excellent prototype source. I don't know why I never think of ebay for cheap parts, I had the same problem with my last big school project. Specifically, I was trying to source "cheap" parts from mouser and mcmaster instead of direct from China via ebay.
tooterLos Angeles · Jun 26, 2013#56
I don't hesitate to buy from ebay foreign sellers. Just bought this stainless steel resonator exhaust tip from Hong Kong for only $23 with free shipping. it's gonna look really neato on the center exit. 🙂

Picture not included in this copy

It was only 9 days from the purchase transaction to when it arrived today in perfect condition. Pretty good for free shipping halfway around the world.
47_MasoN_47Northwest Alabama · Jun 26, 2013#57
This thread makes me happy.
CrankyOldManWest Michigan · Jun 26, 2013#58
Tooter - would you be willing to share your dimensions for the 1ZZ TB gasket channel? I've made a rough estimate from web images and I have a gasket here to measure, but I'd like to know what your functional dimensions are.

Here's what I have so far, as well as a crude mock-up of my idea:

2 attachments not included in this copy

tooterLos Angeles · Jun 27, 2013#59
Originally Posted by CrankyOldMan ↑
Tooter - would you be willing to share your dimensions for the 1ZZ TB gasket channel?
Sure. Glad to help out, Cranky. 👍

I don't have the CAD data so I did physical measurements:

O ring channel inside diameter: 59mm
O ring channel outside diameter: 67mm
O ring channel width 4mm
O ring channel depth 5mm

The O rings drop right into the channels with absolutely no stress, compression, stretch, or deformation.

Picture not included in this copy

Cheers, 🙂

Greg
CrankyOldManWest Michigan · Jun 27, 2013#60
Originally Posted by tooter ↑
Sure. Glad to help out, Cranky. 👍

I don't have the CAD data so I did physical measurements:

O ring channel inside diameter: 59mm
O ring channel outside diameter: 67mm
O ring channel width 4mm
O ring channel depth 5mm

The O rings drop right into the channels with absolutely no stress, compression, stretch, or deformation.
Excellent. Now to take over the world!
AstromanWenatchee, WA · Jun 27, 2013#61
Actively watching this thread as I know I'll be getting a supercharger someday. 🙂
CrankyOldManWest Michigan · Jul 3, 2013#62
The intake arrived yesterday and appears to be decent quality. The welds aren't flawless but the bends appear to be well made. The filter also looks to be pretty solid but I don't think I'll trust the filter media. The hardware is nothing special and the coupler looks to be rubber, but again it's just a MAF tube source.
mr_milesPortland, OR · Jul 4, 2013#63
glancing through the thread, the MAF discussion caught my eye. the K&N typhoon intake's ID matches the 1ZZ TB ID, and does not get smaller at the MAF spot. they overcome this by putting a small little piece of metal in front of the MAF at an angle to fool it into thinking it's the proper diameter. (i bet if we harass 4/20 never forget, he'll take a photo of it for us!)
tooterLos Angeles · Jul 4, 2013#64
Yes. I've seen that strange metal "ramp" on a K & N Typhoon intake. It's a creative adaptation. 🙂
CrankyOldManWest Michigan · Jun 19, 2014#65
Ladies and gentlemen, the time has come for me to introduce you to a whole new level of Smiles Per Gallon. The throttle response is nothing short of SHOCKING. If you have a Blitz, and have the mechanical inclination, DO THIS.

Here's a quick breakdown of the parts:
1. Blitz intake upper section from an xB kit
2. 2" to 2.5" silicone reducing elbow (and 2.5" inline metal coupler)
3. 2" 90° silicone elbow
4. Cranky's homemade 1ZZ throttle body adapter (see previous posts in this thread)
5. 1ZZ throttle body
6. 2.25" to 2.5" silicone reducer
7. MAF section of cheap eBay intake (mentioned previously)
8. 2.25" silicone coupler (from eBay intake kit)
9. Intake-side cutoff from eBay intake
10. 2.25" silicone coupler (from my Injen intake kit)

You can't see the rest, but it consists of:
* Filter-side cutoff from eBay intake
* 2.25" OD to 2.5" ID adapter (made from cutoff piece of 2.5" coupler)
* Injen cone filter

Of course you need clamps for everything, but you can figure that out on your own. =)

There are other details that have to be sorted out, but I have the vacuum lines from the brake booster and fuel system (?) running to a port on the Cranky flange. The PCV tube goes through a makeshift catch can and then vents to atmosphere. The "clean air" inlet is open to the atmosphere but should really be filtered (and probably metered to maintain the OEM configuration).

1 attachment not included in this copy

CrankyOldManWest Michigan · Jun 19, 2014#66
Here's a shot from the driver's side of the engine bay:

1 attachment not included in this copy