Yarisworld Archive

Piston Top Club

14 posts · 3,586 views

yaris2010RSOriginal postAngus, Ontario · Jan 22, 2013#1
So this random thread is Garms fault.....

Just a random thread to see how many people (and how small of a club it really is) have actually seen the tops of their Pistions on their Yaris?

If possible show pics of Piston tops with aprox driving length (metric or imperial)

Originally Posted by cali yaris ↑
^ It's a small club of people who have been able to look at their piston tops. 😁
1 Yaris2010RS
2 Fnkngrv
3 Cali Yaris (AKA Garm)
4 Focus_Sh1ft
5 pimp my yaris
6
7
8
9

Replies 13

yaris2010RSThread starterAngus, Ontario · Jan 22, 2013#2
Ill start, here is mine after 120,000Km

Picture not included in this copy

Picture not included in this copy
fnkngrvIn The Hotbox · Jan 22, 2013#3
You can add me...74k miles. Don't have pics right handy though.
CTScottUSA, CT · Jan 22, 2013#4
Seriously hoping that I only join this club out of curiosity and not out of necessity.
yaris2010RSThread starterAngus, Ontario · Jan 22, 2013#5
u mean like the rest of us have? lol
CTScottUSA, CT · Jan 22, 2013#6
Originally Posted by yaris2010RS ↑
u mean like the rest of us have? lol
Exactly!!!
cali yarisCanoga Park, CA · Jan 22, 2013#7
It's because of me, but I'm not on the list? 😆

p.s. great idea.

Picture not included in this copy
yaris2010RSThread starterAngus, Ontario · Jan 22, 2013#8
Originally Posted by cali yaris ↑
It's because of me, but I'm not on the list? 😆
LOL, Garm, even you need to play by the rules here, this isnt Microimageonline.com.
cali yarisCanoga Park, CA · Jan 22, 2013#9
^ Yes Sir. 😛
Focus_Sh1ftNew Jersey · Jan 23, 2013#10
For the record, this is one club I really wish I wasn't a member of lol.

My recently acquired cynicism from all the trouble I've been having made me want to vote 'this is stupid,' but I'll be a good sport. 😛

Here's what your valves look like when you're misfiring on all four cylinders every 2 seconds 😢

Picture not included in this copy
pimp my yarischicago · Jan 25, 2013#11
Im in. 👍
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
david_827boston, MA · Jan 26, 2013#12
Other than a cylinder misfire, are there any other reasons one would end up joining this club? I havent seen mine, but i am also kinda hoping i never have to.
fnkngrvIn The Hotbox · Jan 26, 2013#13
Well, the stock internals on the 1NZ can handle 8-9 psi of boost all day long however once you start to get to 11/12 it has been found that it could be as little as a few months before the rods cannot handle the pressures and bend. In my case I spiked to somewhere between 25-30psi from the flapper arm on the then current internal wastegate at 1800rpm which in turn put 8 holes in my block and upper oil pan sub assembly 😁
pimp my yarischicago · Jan 26, 2013#14
This rod was dynoed at 197whp at 12 psi of boost 2 days before it bent and hit the cylinder wall. It started my rebuild.
Picture not included in this copy