I'm thinking about installing cruise control on my 2009 Toyota Yaris. Do you recommend doing this? How complicated is it to install? This feature was not on the car when I bought it.
Thanks so much.
dholton
Thanks so much.
dholton
17 posts · 16,965 views
Is your 09 a sedan or hatchback? And, if it is a sedan, does it have the power package (power windows and locks)? Also, manual or automatic transmission?Originally Posted by dholton ↑I'm thinking about installing cruise control on my 2009 Toyota Yaris. Do you recommend doing this? How complicated is it to install? This feature was not on the car when I bought it.
Thanks so much.
dholton
Originally Posted by yours_falsely ↑CT, I have a 2008 sedan with power windows and locks. I saw this on one of your earlier posts, "Currently, it is believed that this will also work for 07-08 Yaris, but a wire will have to be connected to connector A21 of the ECM or Connector AD4 (which is located above the top of the fuse panel, just under the dash)." Does this mean EITHER connector A21 or AD4 or is it case by case? I checked next to the steering wheel and I have the cruise control wires on connector D3.
Originally Posted by yours_falsely ↑I've read all the material and everywhere I've read said that the 2008s shouldn't have the wires in D3. Mine does. I tried the install today; plugged into the ecm and spliced into the cc wires under the steering column and I can't seem to get it to work. I'm not sure as to what to do. I'm checking my resistors right now
OK. That is like a 2009+ Sedan without the power package. So, the blue connects to the ECM wire (or if you are doing the switch method, it just connects to one end of the switch chain). The brown (or the other side of the switch chain) gets connected to chassis ground (or if you test it with a multimeter, you may find that it is already grounded).Originally Posted by yours_falsely ↑Light blue and brown. No ecm wire.
If you are doing switches you don't connect to either of the D3 pins, but you do connect one side to the ECM (since he is doing the CC work) and the other side to ground:Originally Posted by yours_falsely ↑Auto. So, If I'm using the switch I don't need to connect to the ECM? Do I ground the other side of the switch or connect it to the brown? I apologize for all the questions, I've been trying to get this to work for a while now so I just want to make sure.
A 680 should be fine, provided that it really is 680. With a 5%+/- tolerance it could actually be as high as 714 Ohms, if it is on the high side of the tolerance.Originally Posted by yours_falsely ↑One last question (for now). If I'm using the two switch config, can I use a 680ohm resistor? In you post you said it could be replaced with a 567-693 one.
Hi. Sorry it might be quite late after a decade....But I have a Yaris Hatch 2009 Manual with automatic windows...Is there still anyone here who can help me with the installation of the cruise control? I am in Australia and need to buy the tools for it.Originally Posted by dholton ↑I'm thinking about installing cruise control on my 2009 Toyota Yaris. Do you recommend doing this? How complicated is it to install? This feature was not on the car when I bought it.
Thanks so much.
dholton
DIY: 2006-2011 Yaris OEM Cruise Control Complete InstallationOriginally Posted by PeterHamedani ↑Hi. Sorry it might be quite late after a decade....But I have a Yaris Hatch 2009 Manual with automatic windows...Is there still anyone here who can help me with the installation of the cruise control? I am in Australia and need to buy the tools for it.
Best