Yarisworld Archive

Custom Mandrel bent exhaust

35 posts · 14,840 views

BEEFOriginal postnorth carolina · Oct 13, 2012#1
Just wanted to show off my new exhaust. I got it from Malibuguy. He put a kit together for me. I am not 100% on this but I think he is a supporting vendor now.

I am not a flashy guy so I opted for aluminized steel (I planned on painting it anyway) and a straight through muffler. It is 2" mandrel bent from the resonator back.

It involved welding at the resonator and 2 clamps to connect the rest of the pieces. It went pretty well and relatively easy. The friend that helped me wanted to test fit the crap out of it (probably for the best). Everything went without a hitch. It looks good, sounds good, and feels more powerful.

Anyway, here are some pics.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

The muffler all but disappears in the shadows of my car now. I kind of like that look.

Picture not included in this copy

Thanks again to Malibuguy for putting this together for me.

Replies 34

403RSCalgary, Canada · Oct 13, 2012#2
Stealthy! Love it.
cali yarisCanoga Park, CA · Oct 13, 2012#3
Thumbs up! 👏
1.5Tampa · Oct 13, 2012#4
Awesome! Looks great, I just installed my TRD exhaust too. Any dynos?
BEEFThread starternorth carolina · Oct 13, 2012#5
no dyno yet. I was going to wait until I do everything I want to on the car before I dyno it.

living in NC means we don't have that many dynos around anyway so it is a bit of an ordeal to take care of. I'll eventually get around to doing one though.

thanks for the compliments guys.

my idea was "all go, no show" (maybe better "some go, no show")
fnkngrvIn The Hotbox · Oct 13, 2012#6
what are you doing for performance mods again? really like the way that it turned out.
tooterLos Angeles · Oct 13, 2012#7
That's absolutely beautiful pipecrafting, Malibu! 🙇

I like the unobtrusive flat black stealth look too, BEEF👍.

Can you post a sound clip?
BEEFThread starternorth carolina · Oct 13, 2012#8
fnk, I will probably just do the crank pulley and possibly an intake manifold. I have played around with the idea of the blitz but still thinking on that one.

tooter, my sound equipment (yea, laughing on that one) isn't really good enough to reproduce good sound anyway. I have a camcorder that is a few years and it was bottom of the line when we bought it.

I was really happy with what malibuguy did for me. I would recommend him to anyone.
DanMCCanada · Oct 13, 2012#9
Hi, do you know if malibuguy does work in stainless ?...can i ask was price he charged you for the mandrel bends ?...it looks great !
Dan
BEEFThread starternorth carolina · Oct 13, 2012#10
I think he specializes in mandrel bent stainless. he is a member here and that is his screen name. I think you may have issues with shipping. I have heard shipping to canada from the US can be expensive.

I would rather not say what i spent. I will say it was less than a lot of the axle back systems out ther.
malibuguyWestminster, MD · Oct 13, 2012#11
Woohoo! Im glad you like it and it fit fine! How much did you have to trim off the one pipe for proper fitment?
cali yarisCanoga Park, CA · Oct 13, 2012#12
my idea was "all go, no show" (maybe better "some go, no show")
yeah, the second is better. "All go" would have meant deleting your cats. 😉
BEEFThread starternorth carolina · Oct 13, 2012#13
malibu,

I ended up trimming literally 1/2" it was almost spot on. You may end up getting some more business off of this one. Not sure if that is good or bad. I really like the fitment and the pipe diameter was very noticeably larger.

garm,

unfortunately I live in a state that won't allow me to do that. Mine is a dail driver so I need to keep it street legal. Technically I think I could have deleted the rear cat and the resonator but if it is noticed that I removed equipment, they could ping me for that too.
cali yarisCanoga Park, CA · Oct 14, 2012#14
unfortunately I live in a state that won't allow me to do that.
So do I. 😁
yariseggvvtiCali · Oct 14, 2012#15
I took the yairs out to muffler shop and cost $100 for 2.25 piping. I would like to know what are those two right after O2 sensor. Cat and resonator? What if i take those two out? Sounds deeper or sounds like lawn motor. Thanks!
3cyltrboOttawa · Oct 15, 2012#16
Originally Posted by BEEF ↑
fnk, I will probably just do the crank pulley and possibly an intake manifold. I have played around with the idea of the blitz but still thinking on that one.
Can I recommend some stuff (if you're looking to free up some power)

I have the complete pulley set (all 3 lightened) and it made a noticeable difference, however not as much as lightweight wheels (ie:sub 10lb)

Also, now that you have exhaust - you might look into header (I know that on my last 1nzfe it really helped alot once the header went in)

Just my opinion (others may vary)

Good start so far

Will
cali yarisCanoga Park, CA · Oct 15, 2012#17
Pretty sure it goes like this:

Head > Header w/O2 sensor> flange > 1st cat > second O2 sensor > 2nd cat > resonator > piping > flange > axle-back muffler > tip

I would like to know what are those two right after O2 sensor. Cat and resonator?
BEEFThread starternorth carolina · Oct 15, 2012#18
3cyl,

I already did the header. I was actually going to do them both at the same time but got impatient and since the header was in my laundry room, I went ahead and put it on. there is a thread on it. Another header thread...

I have thought about doing the light weight crank pulley and a friend of mine is trying to talk me into a light weight flywheel.

the wheels for right now are fine and I kind of like the unique look of them (and they were cheap). may be something to think about in the future.

for now, I have spent quite a bit of money on my yaris in the past 6 months or so. I need to lick my wounds before Christmas. I will probably hold off on anything else until next year. then again, next year isn't that far away.

Cali (garm)

you are correct about the exhaust flow
ilikericesavannah, ga · Oct 15, 2012#19
I love this setup.. If it was possible, I'd like a mid pipe with a High flow Cat up to the rear axle so I can keep my axle back exhaust.
xnamerxxso cal · Oct 15, 2012#20
I modified an OBX exhaust to accomplish what you want.
blacksandiegovitzJust chillin' out brah ! · Oct 15, 2012#21
Originally Posted by xnamerxx ↑
I modified an OBX exhaust to accomplish what you want.
What size is the piping on that obx kit ?

Nice exhaust ! +2 for the diy weld job on the stock res
ilikericesavannah, ga · Oct 15, 2012#22
Originally Posted by xnamerxx ↑
I modified an OBX exhaust to accomplish what you want.
mmm.. good idea. thanks.
blacksandiegovitzJust chillin' out brah ! · Oct 15, 2012#23
Originally Posted by ilikerice ↑
mmm.. good idea. thanks.
Yeah I got a qoute from a couple exhaust shops and they are asking 120-150 for resonator back piping and that's not stainless. so pretty good price for a custom set-up and also can leave the stock exhaust un-molested
xnamerxxso cal · Oct 15, 2012#24
Pipe size is 2.25 and its 16 gauge SS. A catalyst costs about 80 dollars give or take and the rest is up to you.
malibuguyWestminster, MD · Oct 16, 2012#25
Originally Posted by blacksandiegovitz ↑
Yeah I got a qoute from a couple exhaust shops and they are asking 120-150 for resonator back piping and that's not stainless. so pretty good price for a custom set-up and also can leave the stock exhaust un-molested
thats for crush-bent 14g aluminized steel...that pricing is just about dead on for any typical muffler shop job...which is something i would not recommend if you actually want power, as it is not actually an upgrade over the factory mandrel-bent SS tubing. if you are just after sound, then by all means go for it.

i'm not a vendor just yet, i'm working on offering more things to offer everyone...maybe a month or two
baseballfan416Milwaukee, Wi · Oct 17, 2012#26
bump... still interested in a cat less mid pipe or highflow midpipe option for sedan....
MBSPEPasadena, MD · Nov 1, 2012#27
just a heads up, when i can get the vendor thing sorted out this will be sold under this screenname :)
vtencolumbus · Nov 1, 2012#28
Long tube header, 200 cells cat and a center muffler with a dual twin pipes on each side .... All In stainless steel !

I think it'll be cost more than my Yaris ... Lol
1.5Tampa · Nov 1, 2012#29
I want race headers toooooo :( I wish there was a manufacturer out there who made some.
DanMCCanada · Nov 1, 2012#30
Originally Posted by malibuguy ↑
Woohoo! Im glad you like it and it fit fine! How much did you have to trim off the one pipe for proper fitment?
malibuguy,how can i get hold of you regarding a quote for an exhaust mandrel bend system ?...do you do work for Honda SUV's too or Toyota cars only ?
Thank you,
Dan
JohninVTVermont · Nov 2, 2012#31
Originally Posted by DanMC ↑
malibuguy,how can i get hold of you regarding a quote for an exhaust mandrel bend system ?...do you do work for Honda SUV's too or Toyota cars only ?
Thank you,
Dan

Same here....I sent a PM last night.
ilikericesavannah, ga · Nov 2, 2012#32
yep.. gonna need a high flow can mid pipe here shortly.. I just ordered my headers and I dont wanna bottle neck the air flow from my headers to my exhaust.. keep us updated
1.5Tampa · Nov 2, 2012#33
Dang doing an exhaust now? ^^
ilikericesavannah, ga · Nov 2, 2012#34
Yea. Trying to get more air flow. Every bit of hp and torque i can get for autocross next year
1.5Tampa · Nov 2, 2012#35
Do you have any breathing mods?

I have i/h/e and i still am surprised how noticeable the difference is for our little cars