BEEFOriginal postnorth carolina 路 Aug 9, 2012#1I recently received my Weapon-R header. I am going to heat wrap it and silicon seal it before installing it. My progress will be slow.
I will say that my wrapping is a little less than "professional". I think I will keep my day job.
Picture not included in this copy
Picture not included in this copy
Heat wrapping...
Picture not included in this copy
Picture not included in this copy
I soaked the wrap so it would be more malleable. I am waiting for it to dry before I hit it with the silicon.
Replies 19
tooterLos Angeles 路 Aug 10, 2012#2I like header threads. 馃檪
Looks like you did a reasonably neat job considering that particular header is a difficult complex shape to wrap... and those are really nifty stainless retainers.
(by the way, you have a very cute little daughter. 馃憤 )
BEEFThread starternorth carolina 路 Aug 10, 2012#3I think it would have wrapped much better if it were the 3 foot long beasts that you see on some of the old v8s. it was tight and finicky. I ended up getting the stainless steel wire ties from ebay. I didn't like the idea of paying $10 for 4. I got 25 for around $15 or so.
my daughter is awesome. she said "this is daddy's toy"
1.5Tampa 路 Aug 10, 2012#4really nice header. That wrap job came out pretty good too. Love my ceramic coated DC 馃榿
cali yarisCanoga Park, CA 路 Aug 10, 2012#5As long as it keeps the heat in, right?
No one can see it back there.
malibuguyWestminster, MD 路 Aug 10, 2012#6i tried to wrap mine...i got three rotations of wrap in & said fuck it...i have very little patience for stuff like that (suprisingly)
i may perhaps consider getting it swain coated
BEEFThread starternorth carolina 路 Aug 10, 2012#7I checked with swaintech and they wanted $250 to coat it (not including shipping). a friend of mine got a long tube header for a chevette and had it done. he recommended them but I couldn't see paying that kind of money for it.
xnamerxxso cal 路 Aug 10, 2012#8So Garm you ever think were going to see long tubes for the Yaris?
GolddeenohColumbia, SC 路 Aug 10, 2012#9I would suggest getting the header exhaust kit from Micro Image.
http://shop.microimageonline.com/ARP...t-ARP-ems1.htm Get the 45mm kit the flange on aftermarket headers tends to be thick and these studs work great and allow for easier instillation, the bottom middle bolt is a trick to get to, at least on the Megan Racing header it is.
packetraceQuebec 路 Aug 10, 2012#10Thats is nice!! Where dinyou bought this wrap and silicone ?
BEEFThread starternorth carolina 路 Aug 10, 2012#111.5Tampa 路 Aug 10, 2012#12Beef I think you're understating your wrap. It came out really good and looks well coated IMHO.
Now enjoy that midrange grunt 馃榿
BEEFThread starternorth carolina 路 Aug 10, 2012#13@1.5
thanks, I hope you're right. I still need to silicon seal it. then get time to actually put it on the car.
1.5Tampa 路 Aug 10, 2012#14The install is fun, its not "hard" by any means but its in an awkward position so it can get annoying at times. Being under the car working in a tight spot with your arms reaching up...
CoryMWhite Rock BC 路 Aug 11, 2012#15As someone who has done header wrap; Good job!
I always start off with grand visions of perfection, then end up with crap.
Not much use for you, but some people use high temp paint on the wrap after instead of silicone spray. It adds the colour back and seals it. I will be doing this on my other car but it's exhaust is a *little* more visible than on a Yaris (headers stick out the sides of the car 馃槈)
BEEFThread starternorth carolina 路 Aug 15, 2012#16I silicon sealed the header. I did some spraying and hit it with the torch.
Pre-silicon
Picture not included in this copy
Post-silicon
Picture not included in this copy
1.5Tampa 路 Aug 15, 2012#17Very nice, I like it looking darker.
tooterLos Angeles 路 Aug 15, 2012#18I do too. 馃檪
The dark color complements the unusual contours of the header. Now don't ding it up when you install it! 馃槈
1.5Tampa 路 Aug 15, 2012#19Impossible lol ^^
BEEFThread starternorth carolina 路 Sep 12, 2012#20was waiting for the exhaust to do it all at one time but said screw it. the header went on. it was actually pretty easy and straight forward. for anyone that is thinking about doing it though...take off the cowl, it made things so much easier.
also, the header wrap and silicon sealant smoke and stink like nobodys business. I was told it will take a while to burn all of that off. I may be driving the yaris for a while to get rid of all that.
Picture not included in this copy
I've seen many of these comparison pictures but it is amazing just how little the runners really are. the ones on the Weapon-R seem almost twice the size of the original one.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy