SMH. Sad. Pathetic on the part of the person who used your image without permission. Hasn't this happened to another member in the past (besides Garm)?.....Kaotic?Originally Posted by 1.5 ↑Just found this ebay ad and theyre using a pic of my car without permission
My Build Thread
650 posts · 141,009 views · page 8 of 13
Replies continued
Yea I messaged him earlier, He can only use my image if it is watermarked and he has my permission. I also told him to maybe include info to potential buyers on how they fit. That might even fall under buyer protection IDK.
Wow I just checked the page again and they already removed the pic lol I guess one of you guys also hit them up
Yes sir. 🙇
yea, my bffl crx is used for crx vertical door and for the mugen flared body kit. He just don't care enough to have them take it down. its all over ebay.
The vertical door picture was taken back in 2003 at his house he had posted on a forum and the mugen flared wide body was take at Hot Import Nights back in 2006.
The vertical door picture was taken back in 2003 at his house he had posted on a forum and the mugen flared wide body was take at Hot Import Nights back in 2006.
2 attachments not included in this copy
Shit, sorry to crx bomb your thread.. my bads bro
LOl all good its funny
Fail :( all my wheels are leaking
From where - there place where you sealed them with silicone?
the bolts. The fronts leak real bad. i actually drove home on the rears and they even read no loss in psi when I got home. Now they read about -2 on the passenger side and -5 on the drivers side about 1 hour after I got home. Now if the silicone was doing its job air wouldnt be able to make its way to the bolt holes so I guess the silicone is the culprit. All the bolts are torqued to spec.
Sucks! You'll have to split it up again and reseal correctly. Maybe this link might help?
Thanks, thats one of the links I used to do it this time. I think I am going to replace the bolts just to be safe. Using old bolts is a hotly debated topic in 3 pc wheels builds lol. When i redo the sealing itself im just going to go slow and steady and be patient, really taking my time and maybe do 3 coats instead of 2.
To satisy those complaining im not mounting them... I tried. These are from my boys shop and then after getting home from his shop. The fronts flattened before I left but the rears looked ok and I drove on them and they still didnt lose any air but then all of a sudden an hour after getting home they started losing all air too so back to stockies. I did get all the tires dismounted and have already broken down two of the wheels again.
Shotty photos but shows some progress
Picture not included in this copy
Picture not included in this copy
Shotty photos but shows some progress
Picture not included in this copy
Picture not included in this copy
2 attachments not included in this copy
Those wheels look awesome.
I like the front
Sucks to hear about the leaks man, but I'm lovin how the wheels came out.
too much stretch?
really loving your wheel man. i really hope someday i could afford one of those.
oh, and please dont put any body kit. sideskirts are fine, but front/rear add ons are meh. but thats just me though haha.
oh, and please dont put any body kit. sideskirts are fine, but front/rear add ons are meh. but thats just me though haha.
Thanks man ^^
Ive been feeling the same about lips/accents, I probably will keep it clean
Ive been feeling the same about lips/accents, I probably will keep it clean
Finally got this bad boy installed yesterday
I wanted to also lower the front coils and install my front strut bar but messing with the gaskets on the manifold took like 2 hours so i didnt have time
Picture not included in this copy
I wanted to also lower the front coils and install my front strut bar but messing with the gaskets on the manifold took like 2 hours so i didnt have time
Picture not included in this copy
1 attachment not included in this copy
absolutely beautiful! how long did installation take?
Thanks!
It spanned a total of 5 hours but I did take like an hour intermission and like 10-15 minute breaks when i hit obstacles. A total working time of probably ~2-3 hours
It spanned a total of 5 hours but I did take like an hour intermission and like 10-15 minute breaks when i hit obstacles. A total working time of probably ~2-3 hours
Some more mods this weekend:
picked up a new jack from HF on Sunday. Got this badboy for $85 after tax
Picture not included in this copy
http://www.harborfreight.com/rapid-p...NzgxNCJ9%0D%0A
Used it to lower the front coils a little more and install my strut bar as well. This is now what my engine bay looks like.
Picture not included in this copy
picked up a new jack from HF on Sunday. Got this badboy for $85 after tax
Picture not included in this copy
http://www.harborfreight.com/rapid-p...NzgxNCJ9%0D%0A
Used it to lower the front coils a little more and install my strut bar as well. This is now what my engine bay looks like.
Picture not included in this copy
2 attachments not included in this copy
SweeeeetOriginally Posted by 1.5 ↑Some more mods this weekend:
picked up a new jack from HF on Sunday. Got this badboy for $85 after tax
Attachment 51821
http://www.harborfreight.com/rapid-p...NzgxNCJ9%0D%0A
Used it to lower the front coils a little more and install my strut bar as well. This is now what my engine bay looks like.
Attachment 51822
love that jack.. my best friend.
Looks great. The one thing I hate about our cars is that damn battery. Damn thing is bigger than the valve cover. When its time to replace mine or gets to that point where its at its 5 year mark (which ever comes first). I am either going to relocate elsewhere or get something smaller. Either a braile or whatever is the new thing at the time.
Looks great. The one thing I hate about our cars is that damn battery. Damn thing is bigger than the valve cover. When its time to replace mine or gets to that point where its at its 5 year mark (which ever comes first). I am either going to relocate elsewhere or get something smaller. Either a braile or whatever is the new thing at the time.
Yea man its so not proportionate makes my motor look even smaller and more pathetic lolOriginally Posted by ilikerice ↑love that jack.. my best friend.
Looks great. The one thing I hate about our cars is that damn battery. Damn thing is bigger than the valve cover. When its time to replace mine or gets to that point where its at its 5 year mark (which ever comes first). I am either going to relocate elsewhere or get something smaller. Either a braile or whatever is the new thing at the time.
Nice jack. I've got the smaller version of that one and it's been going strong for ~4 years now.
And I feel you on the battery. I got one that is actually for a Scion iq when I replaced mine last week. It's thinner than the stock one, but just as wide and tall as before. I would've loved to relocate it or get a tiny one though.
And I feel you on the battery. I got one that is actually for a Scion iq when I replaced mine last week. It's thinner than the stock one, but just as wide and tall as before. I would've loved to relocate it or get a tiny one though.
Yea dude that jack is a champ, two full pumps from bar at vertical to bar at max horizontal, and the car is like 3 feet in the air alreaedy lol
Up until recently i was not concerned with how my engine bay looked i was more concerned with having just a few bolt ons for that fun factor. Now i really am concerned with how it looks and am starting to make adjustments but i had just replaced the battery maybe 6-8 months ago and went with a stock replacement so it will be a while before i swap it out again
Up until recently i was not concerned with how my engine bay looked i was more concerned with having just a few bolt ons for that fun factor. Now i really am concerned with how it looks and am starting to make adjustments but i had just replaced the battery maybe 6-8 months ago and went with a stock replacement so it will be a while before i swap it out again
FML!!!
Last night on the way back from a local meet I merge into the turn lane for my complex and about 50 feet from the turn i see a massive branch. I try to avoid it but this little idiot ricer in a beatup civic decides to speed up from way behind me so he can blow by a stopping Yaris (🤷) and i cant get out of the way of this damn tree trunk. I decided id rather run it over with a wheel then let it annhilate the undercarriage of my car and have an oil pan smashed in like MrMiles. So clunk clunk clunk i run it over, i dont notice any flat, no damage to the body I can see and no issue with alignment but it was dark. This morning i head out to work and I notice this odd clunking kind of noise as if something is moving around. Its not at any specific time and its not when suspension compresses, not on all turns, not on all shifts, it just happens at random. I cant find anything messed up yet but I did see that there is a piece of tree shard lodged where my LCA connects. I will try to asses more later :(
Last night on the way back from a local meet I merge into the turn lane for my complex and about 50 feet from the turn i see a massive branch. I try to avoid it but this little idiot ricer in a beatup civic decides to speed up from way behind me so he can blow by a stopping Yaris (🤷) and i cant get out of the way of this damn tree trunk. I decided id rather run it over with a wheel then let it annhilate the undercarriage of my car and have an oil pan smashed in like MrMiles. So clunk clunk clunk i run it over, i dont notice any flat, no damage to the body I can see and no issue with alignment but it was dark. This morning i head out to work and I notice this odd clunking kind of noise as if something is moving around. Its not at any specific time and its not when suspension compresses, not on all turns, not on all shifts, it just happens at random. I cant find anything messed up yet but I did see that there is a piece of tree shard lodged where my LCA connects. I will try to asses more later :(
Maybe the tree branch that's lodged down there is what's making the clunking noise? Maybe once yiu pull it out the noise will stop..? Hopefully! :)
Rolling Shot!!!! Probably one of my favorite pics of my car
Picture not included in this copy
Picture not included in this copy
1 attachment not included in this copy
This is a pretty good shot. I can't wait to see you do a photo shoot with the wheels on.
me too ^^
You gonna keep that wheel color?
You mean on the BBS? ^^^
Yes probably until next show season
Yes probably until next show season
So its been over a month since I sealed up my wheels and tried mounting them and was disappointed by lots of leaking. I got discouraged and stopped working on them for a while then I had to deal with the onslaught of september/october birthdays in my family. Now im back at it.
This weekened I borrowed ToyotaBuzz's super beastly corded drill and picked up a 3m paint/rust remove polycarb pad. After a few hours here and there and pounds of black dust flying everywhere, I was able to get all the silicone off. Because i had just applied it a few weeks ago and it never got any heat or element exposure like it would being on the car, the silicone was in perfect condition and most tools I have used before would just bend and flex the silicone out of the way and then it would flex or snap back into place lol. Buzz's drill didnt allow that lol.
I then washed all my faces and scrubbed any dirt off, taped off the mounting surfaces and redipped them to get an even sharper finish. Now they are ready to be resealed again. While letting the faces dry and also did the rear emblem to match. Hopefully it wont be long before these are mounted.
Picture not included in this copy
Picture not included in this copy
This weekened I borrowed ToyotaBuzz's super beastly corded drill and picked up a 3m paint/rust remove polycarb pad. After a few hours here and there and pounds of black dust flying everywhere, I was able to get all the silicone off. Because i had just applied it a few weeks ago and it never got any heat or element exposure like it would being on the car, the silicone was in perfect condition and most tools I have used before would just bend and flex the silicone out of the way and then it would flex or snap back into place lol. Buzz's drill didnt allow that lol.
I then washed all my faces and scrubbed any dirt off, taped off the mounting surfaces and redipped them to get an even sharper finish. Now they are ready to be resealed again. While letting the faces dry and also did the rear emblem to match. Hopefully it wont be long before these are mounted.
Picture not included in this copy
Picture not included in this copy
2 attachments not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
4 attachments not included in this copy
what! finally.. gez...
looks..... LOUD! nicely done
looks..... LOUD! nicely done
Very nice man! Happy to see em on!
thanks guys
Im still experiencing some leaking from one of the fronts but its not the bolts this time so im gonna keep filling it and watching it. I might have to take it to my tire guy and reseat it if it popped off the bead
Im still experiencing some leaking from one of the fronts but its not the bolts this time so im gonna keep filling it and watching it. I might have to take it to my tire guy and reseat it if it popped off the bead
Rss look pretty dope, check the leaky wheel between the face and the lip it's a common issue with them. I have the same issue on mine!
Post more pics.....
Post more pics.....
RS's are 3 piece so there is a seam between the lip and face and between the face and barrel. I already know thats where the leak is it cant really be anywhere else other than maybe the valve stem but that was checked already. I just hate having to keep mounting tires, finding they leak, taking tires off, resealing them, mounting tires again, and repeating. It's getting annoying and expensive.Originally Posted by Radvr6t ↑Rss look pretty dope, check the leaky wheel between the face and the lip it's a common issue with them. I have the same issue on mine!
Post more pics.....
I hear ya I'm in the same boat. I just lived with it and filled it up once a week, that is the joys of 3 piece wheels. Just take off the tire one last time and silicone the shit out of the seam and you should be ok. You are running a pretty good stretch but i know Im only running 205/40 on a 17x9:)Originally Posted by 1.5 ↑RS's are 3 piece so there is a seam between the lip and face and between the face and barrel. I already know thats where the leak is it cant really be anywhere else other than maybe the valve stem but that was checked already. I just hate having to keep mounting tires, finding they leak, taking tires off, resealing them, mounting tires again, and repeating. It's getting annoying and expensive.
Not a toyota but here is my build thread -VW VORTEX - Tylers Corrado Vr6T
Hope you get sorted and I look forward to more updates!
Damnnnn so clean. I love Corrados and those smoothies look awesome on there.
If mine only leaked slow enough that I had to fill them once a week id be ok but currently its once before each commute and then by the time i commute back i have to fill up again.
Im trying to avoid removing/remounting the tire a third time so I spoke to a few modular wheel experts and they recommended me putting a tiny bit of a thread loc/silicone/CA glue combo around the head of the nut to stop the leak. Im in the process of doing that and hopefully I can air up the tire soon. Even if I still have to refill once a week with that id be happy.
My rears yes are 16x10 on a 205/40 but the fronts are 16x9 on 205/40. The leaky one is a front so its the same setup as yours.
If mine only leaked slow enough that I had to fill them once a week id be ok but currently its once before each commute and then by the time i commute back i have to fill up again.
Im trying to avoid removing/remounting the tire a third time so I spoke to a few modular wheel experts and they recommended me putting a tiny bit of a thread loc/silicone/CA glue combo around the head of the nut to stop the leak. Im in the process of doing that and hopefully I can air up the tire soon. Even if I still have to refill once a week with that id be happy.
My rears yes are 16x10 on a 205/40 but the fronts are 16x9 on 205/40. The leaky one is a front so its the same setup as yours.
So i got a hold of Clifford Paint and Bodykits through their facebook and talked bout getting a hold of the TRD Sportivo3 front end I have been drooling over. I found out since they are not a TRD distributor they actually produce Fiberglass replicas which made me very wary since im so low and fiberglass would most likely be so rigid as soon as i lay it on the ground (which happens often at my height) it would crack.
I decided to do a little research on fiberglass vs ABS and i read quite a few people referencing different qualities and types of fiberglass with varying durability and flexibility. I even found a few posts of people commenting on the production process and materials used in Asia spec fiberglass being more durable and flexible than the domestic versions.
I continued to correspond with Clifford and the owner advised me that his fiberglass is more durable and more flexible than ABS. I thought that may be him pitching his product to me until he sent me these photos.
That does not even look like fiberglass and look how much it flexes. I am almost certain I will be ordering this soon
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
I decided to do a little research on fiberglass vs ABS and i read quite a few people referencing different qualities and types of fiberglass with varying durability and flexibility. I even found a few posts of people commenting on the production process and materials used in Asia spec fiberglass being more durable and flexible than the domestic versions.
I continued to correspond with Clifford and the owner advised me that his fiberglass is more durable and more flexible than ABS. I thought that may be him pitching his product to me until he sent me these photos.
That does not even look like fiberglass and look how much it flexes. I am almost certain I will be ordering this soon
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
4 attachments not included in this copy
I Highly Highly HIGHLY recommend after you get this painted. Get it wrapped in that clear 3M wrap. I don't care how much that fiberglass flexes, it will still chip away with any road debris you come across on the highway.
Not only will you save your paint from chips, but its also waxable.
It applies just like that carbon fiber wrap on cars, but its clear. There is a guy here that wrapped his whole car with this in silver. Each body part separately and it looks like a perfect paint job. I was shocked.
here is the website, you can get a free sample to try it out on a small part.
http://solutions.3m.com/wps/portal/3...ts/Series1080/
Not only will you save your paint from chips, but its also waxable.
It applies just like that carbon fiber wrap on cars, but its clear. There is a guy here that wrapped his whole car with this in silver. Each body part separately and it looks like a perfect paint job. I was shocked.
here is the website, you can get a free sample to try it out on a small part.
http://solutions.3m.com/wps/portal/3...ts/Series1080/
Thanks dude I was gonna text you once I got it for tips to help save it lol. I've seen your posts about fiberglass body parts. But I actually was talking with jpadua and I found the lip in ABS for way cheaper and I placed the order. Waiting for them to get back to me on shipping.
Hell Yea. I have a plan to salvage my front bumper. Its a bit unorthadox, but I think it will be pretty awesome. I just need a machine to bend a sheet of metal the same radius as the center/bottom part of my front bumper.
I wish I went ABS. Would make my life alot easier.
I wish I went ABS. Would make my life alot easier.