they are XXR 531's
My Build Thread
650 posts · 141,009 views · page 2 of 13
Replies continued
banana spokes are played out IMHO. Those are ccw reps.
Thanks Tan ^
Thanks Tan ^
those rims are sick - i like 'em a lot.
which ones? The meshies or the white ones?
mesh.
they were much too small and the tires were much too fat
I like the style of the volk reps better, it flows better with the body
I like the style of the volk reps better, it flows better with the body
Used these to help someone with fitment ?'s but they look so good I had to post em here too lol.
Showing my drop and stance/poke
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Front bumper height
Picture not included in this copy
Side height behind front wheel
Picture not included in this copy
Subframe to ground
Picture not included in this copy
For scale
Picture not included in this copy
1" off the ground 😳
Showing my drop and stance/poke
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Front bumper height
Picture not included in this copy
Side height behind front wheel
Picture not included in this copy
Subframe to ground
Picture not included in this copy
For scale
Picture not included in this copy
1" off the ground 😳
7 attachments not included in this copy
you forgot the side view of the car, 1.5. :P
its more like quarter angle shot but it's close
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
2 attachments not included in this copy
DAMN that is low.. gezus christopher.. Are you gonna keep that camber at 0 or gonna go negative something alot?
In the rear I can go slightly lower still with no rubbing issues. I actually have some 130mm/6kg springs coming for that lol. I also am trying to get some rear hub spacers which would bring me to 16x8 +5. When I get those in I prolly will add some shims or just pull the fenders a little more.
In the front I am running 16x8 + 15 + 3mm spacer = +12. I am running -1.2 degrees of camber in front.
In the front I am running 16x8 + 15 + 3mm spacer = +12. I am running -1.2 degrees of camber in front.
CWAYZEEE!! lol
i just dialed my front camber back to 0 , since I need all the traction for the winter, took my 15mm spacers...believe it or not with the -2.8 camber front, and with the additional spacer , it look about the same as it is now ( 0 camber and no spacer )
i just dialed my front camber back to 0 , since I need all the traction for the winter, took my 15mm spacers...believe it or not with the -2.8 camber front, and with the additional spacer , it look about the same as it is now ( 0 camber and no spacer )
New additions from the weekend!
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
2 attachments not included in this copy
1.5,
I wonder, your avatar says "yaris turbo" are you infact boosted?
I wonder, your avatar says "yaris turbo" are you infact boosted?
no I really need to change that, When I first got the car/yw account I wanted a boosted project and even started one, but then parted out and gave up for a while why I worked on stancing it out.
Dat Ass!!!
Picture not included in this copy
My giant zip ties holding my tiny springs
Picture not included in this copy
Picture not included in this copy
My giant zip ties holding my tiny springs
Picture not included in this copy
2 attachments not included in this copy
Bored photo shoot at work with my boy's SRT8
So sorry for the crappy cell pics, it is supposed to be a 8.0MP HD camera but it has a cracked lens and light floods it badly :(
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Didn't know a Yaris could have wider stance than an srt8 lol
So sorry for the crappy cell pics, it is supposed to be a 8.0MP HD camera but it has a cracked lens and light floods it badly :(
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Didn't know a Yaris could have wider stance than an srt8 lol
10 attachments not included in this copy
More from my detail this weekend!
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
4 attachments not included in this copy
im jealous at how dark southern states get to do their tint......i cant go lower than 35% up here...... beautiful pics tho
Lol we dont "get" to go any darker, I am just an outlaw lol I was already ticketed for it once
Thanks
Thanks
Just pull the "I bought it this way" excuse and you "didn't know that it wasn't factory" :p
good thinking ^^^
Damn I'm feelin the sticker bombed interior, That car has come a LONG way from where it was once at, Hopin to see mind getting to that point some time soon enough. My plan on mine so far is a total clean stealth black look...Or it might evolve into something else...Who knows but YOUR car...DAT ASS! lmao naw your car is sick bro and low as Fuuuu. Bravo my friend...Bravo.
thanks it has been a fun journey I have learned so much.
I just pulled my rear fenders quite a bit and dropped the rear more its stupid low.
I just pulled my rear fenders quite a bit and dropped the rear more its stupid low.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Hey 1.5,Originally Posted by 1.5 ↑Picture not included in this copy
Picture not included in this copy
What suspension setup do you have in the rear to drop it that low?
Megan coilovers all around but I'm running 130/6kg in the rears with the locking collars and perches removed.
Dude I love the stretched tire look but whats the down low on how to make that happen? Tire sizes, rim size and all. I want that look and a wider tire stance on my car, the more tire coverage the better the grip. Any one wanna school me on that? You guys know you wanna...Originally Posted by 1.5 ↑its more like quarter angle shot but it's close
Attachment 49160
Attachment 49161
Tyrestretch.com the first number is the width of wheel the second number tire width in mm the third number is tire profile and the last is the wheel diameter (id of tire) pick which looks good based on what wheel you plan on going with.
Sounds like a plan, I wanna get this build off the ground. Just got some head light tint ordered and gonna put it on asap. I black out the front and rear emblems and chrome trim to a matte black and gonna clean it and post a few photos up tomorrow. Hey btw I seen puetato's Blue Yaris pass by me while heading out from the back of Magic kingdom. His shit is siiiiiick, when ever you guys have a meet I'm in if I'm available!
Cool. I love his hatch too. Get some wheels tires and coilovers and take the plunge lol
New Wheels!!!!!!!!!
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
10 attachments not included in this copy
Dang, wheel whoring like crazy! You should give me your old rims. HAHA
lmao dude I get bored too easy and it's getting expensive
They will be going up for sale soon
They will be going up for sale soon
Lmfao dude let me know what you got andnwhat you want for em. I wanna try my damndest to get some wheels so bad. Where do you get all your wheels from any ways???
I think he pulls some Fast and Furious heists. lolololol j/k.
"... I know there's no way inell you pay for all the stuff under the hoods of those cars by doing tune ups and selling grocceries! Now whatever you're in on I want in on it too..."
Holy poke stretching batman !!! I'm jealous mang !!!
I usually start with style or size I'm looking for and then find everything available in that size. Then I just search Google til I find the best price and always double check with MI to see if they can match. Id rather pay a few extra bucks shipping from Cali to give them the business. I'm selling 16x8 +15 varrstoen T1 and you're local ;) lolOriginally Posted by HANZO_187 ↑Lmfao dude let me know what you got andnwhat you want for em. I wanna try my damndest to get some wheels so bad. Where do you get all your wheels from any ways???
Now you're thinking you should have gone with the 9.75 instead of 8.25 lolOriginally Posted by vten ↑Holy poke stretching batman !!! I'm jealous mang !!!
SEXY!!!!!
DOPE WHEELS!
thanks guys, more to come once the front is done as well. Lowered the rear a little more this weekend and my rear camber shims should be in this week as well.
Are they Rota grid or grid v?Originally Posted by 1.5 ↑Attachment 49398
He said 16x8 +15 varrstoen T1 in his posts.
Thanks Sugi that is correct ^^^
very similar to the rota's, they look good!
Thanks theyre for sale
Shame I'm in England hey ;)
ooo sorry no trans atlantic shipping here lol
Waiting for parts blows... I am so impatient
Waiting for parts blows... I am so impatient
So I am trying to fit these monster xxrs on my car and the rears fit pretty well but the front is giving some issues. The inner clearance is around 1-2mm from wheel to shock body but I have plenty of room on the outside between the tire and fender. Another point of issue is the front bumper lip that raps around into the wheel well. From this point my next steps are
1. cuting some of my front bumper lip and relocating that bracket or removing it altogether.
2. adding my spacers back to give me more space between the inner part of wheel and shock body
3. add more negative camber for any other outside clearance issues now that there will be more spacing between the wheel and suspension.
Anyway on to pics...
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
1. cuting some of my front bumper lip and relocating that bracket or removing it altogether.
2. adding my spacers back to give me more space between the inner part of wheel and shock body
3. add more negative camber for any other outside clearance issues now that there will be more spacing between the wheel and suspension.
Anyway on to pics...
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
8 attachments not included in this copy