Yarisworld Archive

Going for broke

143 posts · 44,221 views · page 1 of 3

Blown_xaOriginal postVirginia · Aug 25, 2012#1
My greedy mind has taken over my satisfaction of having a dead reliable setup. Im putting my car back on the dyno, with race gas (C16) and targeting boost to 35psi . I have no idea if the motor will survive. This motor has 45,000 miles of racing and daily driving, but it has been solid thus far. Only thing I have to upgrade to achieve that boost is my map sensor ( current one maxes out at 30psi).

September 3rd Im headed to the dragstrip, and will post results. Hoping for 11.7 @125mph... which would be insane

Replies 142

b20vtegmaricopa, az · Aug 25, 2012#2
sweet, good luck... can't wait to see results!
tk-421Dagobah · Aug 25, 2012#3
I have a feeling the 1NZ will take it like a champ. Good luck regardless! 👍
fnkngrvIn The Hotbox · Aug 25, 2012#4
will be interesting to see...I am figuring that my boost will need to be that high if not more next summer to achieve my goals.
YodaFL · Aug 25, 2012#5
Hmmm that might be too much. It's not sleeved if I remember but you won't know till you do it! Go for it
Blown_xaThread starterVirginia · Aug 25, 2012#6
Originally Posted by Yoda ↑
Hmmm that might be too much. It's not sleeved if I remember but you won't know till you do it! Go for it
Im thinking head gasket will go first, on factory head bolts. Only one way to find out!
scioncrewHB · Aug 25, 2012#7
GOOD LUCK MAN! you got it. 👍 let it eat in second gear keep us posted
cali yarisCanoga Park, CA · Aug 25, 2012#8
Woooo!! Go for it!
fnkngrvIn The Hotbox · Aug 25, 2012#9
125mph in 2nd gear....now THAT would be impressive...lol
packetraceQuebec · Aug 25, 2012#10
Is yout head upgraded ?
Blown_xaThread starterVirginia · Aug 25, 2012#11
Originally Posted by packetrace ↑
Is yout head upgraded ?
stock head, stock block with pistons and rods. Ive been on the 27psi tune for a long time, just want to tune beyond with race gas (same map) for drag use only. If the motor survives the dyno and a few drag passes at that boost, then the boost is coming back down.
cali yarisCanoga Park, CA · Aug 25, 2012#12
So you can just up the boost and run it without any additional tuning? that gives me ideas...
Blown_xaThread starterVirginia · Aug 25, 2012#13
Originally Posted by fnkngrv ↑
125mph in 2nd gear....now THAT would be impressive...lol
lol. I think he means don't pedal 2nd. Couple changes since last 1/4 mile visit also includes a Kaaz lsd along with Yaris gears, 2nd gear should hook for sure w/slicks at MIR. MIR is always prepped very well.
Blown_xaThread starterVirginia · Aug 25, 2012#14
Originally Posted by cali yaris ↑
So you can just up the boost and run it without any additional tuning? that gives me ideas...
oh no.... what I am saying is beyond 27psi the map will be for race gas . Basically a continuation of current tune. Tuning it this week.
pimp my yarischicago · Aug 25, 2012#15
It will be good to know what the limits of a none sleeved 1nz will be capable of. I would love to try that with stock compression and run E85 fuel with a proEFI stand alone $$$$.

Garms co worker was telling me that someone was possibly coming out with a main cap girdle for the 1nz. I bet that could extend your limits with all alluminum block.
fnkngrvIn The Hotbox · Aug 26, 2012#16
Originally Posted by Blown_xa ↑
lol. I think he means don't pedal 2nd. Couple changes since last 1/4 mile visit also includes a Kaaz lsd along with Yaris gears, 2nd gear should hook for sure w/slicks at MIR. MIR is always prepped very well.

Oh I know...but just saying if someone was able to do 125 in 2nd gear that would be insane...impossible I would imagine, but insane. I do know that my buddy's nissan hardbody can get to over 160 before shifting out of 3rd. I will have to ask him for grins again what he shifts at from 2nd on his sr20. I will also have to jog my memory on what tranny/rearend he is running.
thefallsSunny place · Aug 27, 2012#17
Limits are going to be pushed and all of us will find answers to so many questions.
Good luck!!!
GolddeenohColumbia, SC · Aug 27, 2012#18
Didn't someone run a built 1nz-fe with about 32psi to 501whp, so in simple theory a your 35psi could cross 400hp and scare more of those V-8 guys at the track. the trick will be being able to get traction off the line with out spinning the wheels and blowing the engine. this is surely a curious set to see what happens.
Blown_xaThread starterVirginia · Aug 27, 2012#19
Should be able to get it on the dyno by Friday! Customers cars come first.
fnkngrvIn The Hotbox · Aug 27, 2012#23
He hit around 560 unless mistaken with racing fuel...if not mistaken he pulled the close to 500 with premium. Regardless this will be great information to have. This is like not knowing what the top speed is on the C50 paired with the 1nz currently.
thefallsSunny place · Aug 28, 2012#24
And how long can the C50 handle that power.
fnkngrvIn The Hotbox · Aug 28, 2012#25
Originally Posted by thefalls ↑
And how long can the C50 handle that power.
Depends on what you mean. If you are talking about as a DD with stock parts and if you drive like a total douche all of the time then I would wager not long. If you only drive it like you stole every so often then prolly a little longer. If it has upgraded parts that are designed to take the torture it will last longer, but could very well break down sooner than expected. If you race with the car then parts break and so does the wallet. You have to be ready to embrace the fact that your parts very well may or will fail on you on a regular basis. Just a fact of life. I have an uncle that has a best friend that races alcohol funny cars and they have a few transmissions that they round robin because they need to get rebuilt all the time due to extreme wear/tear from 1500+ hp. Just the nature of the beast. 👍
Blown_xaThread starterVirginia · Aug 30, 2012#27
We were able to get my car tuned today. I verified a couple of things today which in the back of my mind, I already knew. My turbo was close to being maxed out before, now it definately is. The other thing; water methanol injection really is the shit. This tune was done on 117octane without water methanol injection, and timing ended up identical to 93 octane tune with water methanol injection.

I feel more comfortable on race gas running high boost however, because years ago I found out on our tC time attack car that above 30psi cylinders 1 and 4 don't recieve enough water methanol as it is distributed through the stock intake manifold. We were able to tune around that because the Haltec sport 1000 had individual cylinder fuel and timing control. My Haltec sprint 500 however, does not have that capability.

My T3 60trim (.42ar compressor, .48ar turbine housing) maxed out at 31psi of boost peak, held 28 at redline. I am not dissapointed however , because we squezzed out 20whp compared to my previous 27psi tune. This should definately get me into the 11's on Monday .
BEEFnorth carolina · Aug 30, 2012#28
so what was the peak hp?
fnkngrvIn The Hotbox · Aug 30, 2012#29
^ 14hp/11tq
fnkngrvIn The Hotbox · Aug 30, 2012#30
really wish that I was able to record my 1/4 mi time/speed with my speedo app :( I have no real clue how well I do, but on the flip side of the coin we aren't allowed to take off hard from the line either.
cali yarisCanoga Park, CA · Aug 30, 2012#31
blown, well done. That confirms a few things for me as well.
Scubaru Stevecalgary · Aug 31, 2012#32
Originally Posted by Golddeenoh ↑
yea that is the one with the 501whp I was talking about, but I believe he did it on jet fuel or race gas.
it would be race gas, jet fuel is kerosene based, like diesel. avgas is aviation, its usually died blue and is 110 octane with lead.
cali yarisCanoga Park, CA · Aug 31, 2012#33
^ and smells like bananas!
Blown_xaThread starterVirginia · Aug 31, 2012#34
I love the smell
scioncrewHB · Aug 31, 2012#35
Originally Posted by Blown_xa ↑
We were able to get my car tuned today. I verified a couple of things today which in the back of my mind, I already knew. My turbo was close to being maxed out before, now it definately is. The other thing; water methanol injection really is the shit. This tune was done on 117octane without water methanol injection, and timing ended up identical to 93 octane tune with water methanol injection.

I feel more comfortable on race gas running high boost however, because years ago I found out on our tC time attack car that above 30psi cylinders 1 and 4 don't recieve enough water methanol as it is distributed through the stock intake manifold. We were able to tune around that because the Haltec sport 1000 had individual cylinder fuel and timing control. My Haltec sprint 500 however, does not have that capability.

My T3 60trim (.42ar compressor, .48ar turbine housing) maxed out at 31psi of boost peak, held 28 at redline. I am not dissapointed however , because we squezzed out 20whp compared to my previous 27psi tune. This should definately get me into the 11's on Monday .
Can't wait to hear updates and see video..👍
Blown_xaThread starterVirginia · Sep 2, 2012#36
darn hurricane reminisce coming through, 70% chance of rain tomorrow.
cali yarisCanoga Park, CA · Sep 3, 2012#37
.... waiting for an update.....

Picture not included in this copy
Blown_xaThread starterVirginia · Sep 3, 2012#38
Originally Posted by cali yaris ↑
.... waiting for an update.....

Picture not included in this copy
I ran into a couple small issues. My trans was getting real hot, and making it hard to shift. I also think the required GL5 grade gear oil for the LSD kind of hindered proper syncro engagement( GL5 is really meant for diffs only, and has no additive for syncros). I wasn't able to let my car cool down long because of the rain threat. Another thing, my 2step was originally wired to my clutch pedal switch, but I bypassed that and use a manual switch ( so I can start car without clutching in to save motor thrust bearing). This made it difficult to modulate the 2 step. I still managed a 11.95 @121mph on one pass however. I am officially in the 11s!.
Picture not included in this copy

1 attachment not included in this copy

Bluevitz-rsOshawa, Ontario, Canada · Sep 3, 2012#40
are you running negative camber not he front? Wouldn't you get better traction with 0°
fnkngrvIn The Hotbox · Sep 3, 2012#41
Originally Posted by Blown_xa ↑
http://www.youtube.com/watch?v=mKDmHUMHmqs

I forgot to mention, I ran on my autocross alignment. -3.4 camber

^ One of the things that I need to do as well is still learn the perfect shift point. One of the suggestions that a lot of folks in the LSR crowd suggest is that even if you have a shift light your eyes tend to center on the tach many times and therefore placing a piece of tape on to provide the quick eye recognition will ensure that if you are happening to look that way instead of the shift light it will help.
Blown_xaThread starterVirginia · Sep 3, 2012#42
Originally Posted by Bluevitz-rs ↑
are you running negative camber not he front? Wouldn't you get better traction with 0°
Yes, I didnt feel like changing my alignment because I autocross a couple times a month.
Blown_xaThread starterVirginia · Sep 3, 2012#43
Originally Posted by fnkngrv ↑
^ One of the things that I need to do as well is still learn the perfect shift point. One of the suggestions that a lot of folks in the LSR crowd suggest is that even if you have a shift light your eyes tend to center on the tach many times and therefore placing a piece of tape on to provide the quick eye recognition will ensure that if you are happening to look that way instead of the shift light it will help.
A shift light is something I have wanted to get!
fnkngrvIn The Hotbox · Sep 3, 2012#44
Originally Posted by Blown_xa ↑
A shift light is something I have wanted to get!

I will need one for sure by next summer with all of the things that I will need to be monitoring that is for sure.
cali yarisCanoga Park, CA · Sep 3, 2012#45
The progressive shift light I sell solves the problem of using peripheral vision.

Congrats, Blown -- 11's, YES!!!
Bluevitz-rsOshawa, Ontario, Canada · Sep 3, 2012#46
^ I know of the guy that makes those. He makes a lot of electronics down in Australia.
scioncrewHB · Sep 3, 2012#47
man i love hearing tires rip like that. good job Blown xa cant want to see more from you..👍
pimp my yarischicago · Sep 4, 2012#48
Love the video. Lets see you take down some more unsuspecting V8's
Blown_xaThread starterVirginia · Sep 4, 2012#49
Originally Posted by pimp my yaris ↑
Love the video. Lets see you take down some more unsuspecting V8's
It was so empty that day because of rain, and it being labor day, I did run one mean looking foxbody on radials. I was told after I beat him that his buddy standing in the burnout area shook his head and said; "well that was embarrassing ''. Ill be attending Imports vs Domestics WCF again this year, Ill be sure to get footage.
cali yarisCanoga Park, CA · Sep 4, 2012#50
^ change your sig 😉