Yarisworld Archive

polished fuel rail

39 posts · 11,855 views

cali yarisOriginal postCanoga Park, CA · Jul 4, 2012#1
Just got these in stock, posted to the store, here's a pic

Picture not included in this copy

Replies 38

YodaFL · Jul 4, 2012#2
^^^Yes its here people jump on it!
packetraceQuebec · Jul 4, 2012#3
does it come with spacer ?
cali yarisThread starterCanoga Park, CA · Jul 5, 2012#4
^ No, the spacer will depend on what injectors are used. I'm using about a 1/2" on my set up. Spacers are readily available from Grainger and McMaster.
packetraceQuebec · Jul 5, 2012#5
What is the size of in and out ?
cali yarisThread starterCanoga Park, CA · Jul 5, 2012#6
-8 AN. This rail has the largest inside capacity and flow possible.
packetraceQuebec · Jul 5, 2012#7
do you have parts lists to fit ...

line

-6an fittings
cali yarisThread starterCanoga Park, CA · Jul 5, 2012#8
^ Not sure what you're asking for. [edited the size] -8AN fittings left and right, at least one 90-degree one for passenger side. Fuel lines. Bolts and spacers. Injectors with O rings.
packetraceQuebec · Jul 5, 2012#9
have pics of yours :D i am visual :)
kounj · Jul 12, 2012#11
Ordered mine should be here monday. Maybe one day this year i will have my turbo installed still need a few more parts.
1.5Tampa · Jul 12, 2012#12
so blingy 🤤
pimp my yarischicago · Jul 14, 2012#13
Its actually a -8an female hole on each side. There huge.
KCALB SIRAYVirginia · Jul 14, 2012#14
Originally Posted by pimp my yaris ↑
Its actually a -8an female hole on each side. There huge.
"They're".....sorry.....carry on😁
packetraceQuebec · Jul 14, 2012#15
-6an......that is what was told me..
GolddeenohColumbia, SC · Jul 14, 2012#16
pimp has one, maybe it is a special one just for him, hmm seems like 2 different sets of information.
cali yarisThread starterCanoga Park, CA · Jul 14, 2012#17
Pimp got the same one as the rest of the production run, just not polished. If he says it's -8, then they are all -8.

Garm
packetraceQuebec · Jul 14, 2012#18
Originally Posted by cali yaris ↑
Pimp got the same one as the rest of the production run, just not polished. If he says it's -8, then they are all -8.

Garm
Sorry all....I wass told me it was -6an....
GolddeenohColumbia, SC · Jul 15, 2012#19
it is just huge, ok :P
cali yarisThread starterCanoga Park, CA · Jul 15, 2012#20
Probably my fault, I thought it was -6AN, but I didn't measure it. Should have waited for pimp to post first.

-8AN
pimp my yarischicago · Jul 15, 2012#21
I bought some -8 to -6 male fitting to go in the ends of the rail. -6an is enough flow for 800hp. I think that should cover it.🤣
pimp my yarischicago · Jul 15, 2012#22
Got almost all my fittings together. I just need to get to work. I been feeling a little lazy lately.

1 attachment not included in this copy

cali yarisThread starterCanoga Park, CA · Jul 15, 2012#23
Looking good Aras/xbgod, would be nice to see one post without your usual sarcasm though.

I'll check the fittings tomorrow morning.
Pimp has one in hand though, and if a -8 fits his, they are all made the same.
XFACORFL · Jul 15, 2012#24
You know it! go big or go home at this point.

But please let your customers know it is 3/4 boss fitttings. You don't need any problems from a faulty install.
packetraceQuebec · Jul 16, 2012#25
So both end of fuel rail are -8an....but like pimp said....you put an adaptee -8 to -6 on each end...and them run -6an hose with appropriate hose ends ...

Am i right ?

Garm can you get the adapter from the hard stock line to -6an fittings ?
cali yarisThread starterCanoga Park, CA · Jul 16, 2012#26
I can provide you with all the fittings based on whatever set up you want.
packetraceQuebec · Jul 16, 2012#27
I can have good prixe on hoses and fittings here in quebec...if you dont mind :)

Fuel rail will come from you of course :)
packetraceQuebec · Jul 16, 2012#28
Originally Posted by pimp my yaris ↑
Got almost all my fittings together. I just need to get to work. I been feeling a little lazy lately.
Have a list of everything needed ?

How much lenght is the hose ?

What is this fuel regulator ? it looks good
pimp my yarischicago · Jul 16, 2012#29
Originally Posted by packetrace ↑
So both end of fuel rail are -8an....but like pimp said....you put an adaptee -8 to -6 on each end...and them run -6an hose with appropriate hose ends ...

Am i right ?

Garm can you get the adapter from the hard stock line to -6an fittings ?
Yes you are 100% correct. I am going to run -6 fuel as a feed line and return line. You can also run a -6 feed line and use the stock fuel line for the return, like Garm. The regulator in the picture is a Areomotive. I dont know how much it cost. I got it used from a friend. This is what I got so far.

http://www.ebay.com/itm/Turbosmart-l...05%26rk%3D1%26

http://www.ebay.com/itm/170856323241...84.m1439.l2649

http://www.ebay.com/itm/180839939544...84.m1439.l2649

http://www.ebay.com/itm/230400476291...84.m1439.l2649

http://www.ebay.com/itm/180864287470...84.m1439.l2649

http://www.ebay.com/itm/310232698361...84.m1439.l2649

http://www.ebay.com/itm/180846322388...84.m1439.l2649

http://www.ebay.com/itm/260896688867...84.m1439.l2649

The bulkhead fitting will go in the top of the pump. I may also buy a -6 inline fuel filter.
packetraceQuebec · Jul 16, 2012#30
Thank you pimp for all the information!! Which are very usefuel!!!

I could have waited for the fuel rail....but I was curious I like to know what to be waiting for....and you are right...these fittings are probably the same as the one they sell double price on summit racing or something :P
GolddeenohColumbia, SC · Jul 19, 2012#32
it is cool what you are doing to your xB but I would prefer to see what you can do to a Yaris. 1 toasters don't seem very aerodynamic, where the Yaris is more aerodynamic than an xB (granted still not the most aerodynamic choice). 2 most people on here have a Yaris and would like to see your skills at working in the smaller engine compartment. just some input for ya "XFACOR".
cali yarisThread starterCanoga Park, CA · Jul 19, 2012#33
I'm pretty sure we only took off the drivers side ear. On the passenger side, a 90-degree fitting cleared.
GolddeenohColumbia, SC · Jul 19, 2012#34
maybe you did it wrong :P
cali yarisThread starterCanoga Park, CA · Jul 19, 2012#35
Picture not included in this copy
GolddeenohColumbia, SC · Jul 20, 2012#36
couldn't you notch the ear instead of removing it or would that still cause -8 clearance?
packetraceQuebec · Aug 4, 2012#37
«PIMP i want to see picture of wen you gonna build your pump assembly :)
fase4Venezuela · Jan 2, 2013#38
This fuel rail have any benefit? I dont know anything from aftermarkets fuel rail, can anyone explain me?
pimp my yarischicago · Jan 4, 2013#39
The bigest benefit is that you can add a return line and adjustable fuel pressure regulator. It will also flow more fuel that you will need with a turbo.