ChinoCharlesOriginal postOH · Mar 7, 2007#1This is the ghettoastiest (if i may) thing you have ever seen, I promise.
The goal was to make an intake that didn't throw a CEL. I didn't care if it was made out of PVC, rubber, aluminum, steel, lead... make it happen. It is meant to be a template for the steel welded version to come. Therefore, I took a jaunt to Autozone and grabbed some stuff.
Filter, breather filter, couplers, clamps, a 3" exhaust pipe length not pictured, the hacked up bits of an xA intake, and a radiator hose from God knows what. Welcome to monster garage.
This series of pictures shows step-by-step how we built this intake. Watch some of the more "creative" routes we had to take. We didn't have everything we wished we had had, but it was 9 PM and the stores are closed. Time to make shit work.
It sounds normal... then you hit 3000 RPM's and a bear crawls out from inside your manifold. Its absolutely refackingdiculous. 50 miles, no CEL.
Replies 232
eTiMaGoBangkok, Thailand · Mar 7, 2007#2it's ghettofabulous!
It's weird though, I'll have to double check against my stock intake components, but isn't there a small tube that hooks into the ridged rubber intake tube right before the throttle?
ChinoCharlesThread starterOH · Mar 7, 2007#3Breather tube. There is a cute little filter to match the big one popping out of my head now. It makes me laugh.
I think thats what you're referring to, right?
esquivaSouth Cali · Mar 7, 2007#4hmm..interesting work u did there...was it from the "hacked-up xa tubing" that u were able to connect the sensor?
ChinoCharlesThread starterOH · Mar 7, 2007#5 Originally Posted by
esquiva ↑ hmm..interesting work u did there...was it from the "hacked-up xa tubing" that u were able to connect the sensor?
Yes.
esquiva and anyone else that wants to go this similar route... what you're looking for is a MAF adapter for a Toyota Karman Vortex air flow meter. In order to get this to work you need to put that MAF as close to the throttle body as possible.
I may have got lucky... this type of MAF is supposed to be the most accurate and the least restrictive ever made, but it is also notoriously touchy. It needs to be mounted dead center in whatever pipe its measuring. This could be done on 3" pipe, but it would have been a fabrication nightmare and the throttle body inlet is 2" anyway, so without a larger throttle body this intake would have had to feed into 2" tubing eventually. I saved some time with the xA intake, but I'm willing to bet it could be done with parts out there on the market as well. Just look for that adapter.
Also, consider that if you DON'T get it right and throw a CEL, you're going to need an oscilloscope to understand why... don't think your shitty multimeter is going to cut it. The signal from this particular MAF is too high frequency for that.
ChinoCharlesThread starterOH · Mar 7, 2007#6OK, first of all good news for anyone who wants to follow suit and do their own DIY intake. I checked on Autozone's web site and they list an MAF adapter for the Yaris made by Spectre. It isn't available yet, but the fact that it is even in their online catalog leads me to believe that it will be. I'll keep looking.
If you sit tight you may just see a metal version of my intake for sale here soon, and for WAY less money than anyone else is charging. All proceeds will go to the "put nitrous in a Yaris" fund.
Now that I have had 24 hours and 30 highway miles to play with my new toy, let me just say WEEEEEE. It sounds incredible! I am going to try and get video of the engine bay when I gun it, but there is an instant "whoosh" followed by this growl that didn't come from that little 1NZ before. From the cabin it sounds like it has an exhaust, and I don't have an exhaust yet. There is also a noticable power difference. I shifted out of first at 34 MPH today... without bouncing the limiter. Its definitely making more power. I need to get to a dyno and figure out where it is making that power and where it may be losing power (if any). Of course it is going to run even better when I free the interior of the piping from some of the blunt edges it has now. We start manufacturing the MAF sensor plates tonight.
KittPanama City, Panama · Mar 7, 2007#7Did you had any issues with the MAF? any check engine after that?
ChinoCharlesThread starterOH · Mar 7, 2007#8Nope, haven't seen a CEL yet on my car.
PetersRedYarisThe Black Hills of South Dakota · Mar 7, 2007#9 Originally Posted by
ChinoCharles ↑ Breather tube. There is a cute little filter to match the big one popping out of my head now. It makes me laugh.
I think thats what you're referring to, right?
🎉 It actually looks descent, but isn't it better to have the small tube Etimago was talking about connected in line like it is from the factory. Please correct me if I'm wrong; With your little filter it can breath, but with the tube inline between the filter and throttle body it creates a vacuum and actually pulls gases, which can be acidic, out of your crank case. In addition, instead of letting these gases float out your little filter, pulling them through the engine burns them up and reduces emissions. Yes? No? Am I retarded? Don't answer that second one.
spkrman2 · Mar 7, 2007#10awesome :)
now get that intake made foo!
On that note, I had my various intake renditions hold for a day or 2...but always a cel.
And on that note again, pep boys already had a MAF adapter, although for the life of me i cant figure out why the hell i couldnt get the car to run properly with it in place.
yrsdrgnSF,CA · Mar 7, 2007#11That looks pretty nice ChinoCharles. Keep up the good work👍
jdubau55Blacksburg, VA · Mar 7, 2007#12NICE!!! What is the cost with this? And how fast could you swap the stocker in....say if you had to have warranty work done?
ChinoCharlesThread starterOH · Mar 7, 2007#13 🎉 It actually looks descent, but isn't it better to have the small tube Etimago was talking about connected in line like it is from the factory. Please correct me if I'm wrong; With your little filter it can breath, but with the tube inline between the filter and throttle body it creates a vacuum and actually pulls gases, which can be acidic, out of your crank case. In addition, instead of letting these gases float out your little filter, pulling them through the engine burns them up and reduces emissions. Yes? No? Am I retarded? Don't answer that second one.
You know, I'm not entirely sure Peter, but I'll run this post by the guy I am working on this with. He will be able to explain the breather filter better... he's the real expert in this. I just give him a bank account, a new car and some info! Sit tight.
And on that note again, pep boys already had a MAF adapter, although for the life of me i cant figure out why the hell i couldnt get the car to run properly with it in place.
Did you end up taking pictures of it? If so link me to the picture or post it in here.
NICE!!! What is the cost with this? And how fast could you swap the stocker in....say if you had to have warranty work done?
The ghetto mockup cost $100, but that was because we are in a rush. If we weren't we could have done this cleaner and cheaper... probably half of that. We want to get this intake built and sold so I can cover my ass on the cost of building it AND so we can take the profits and go straight for the spray! I just want to rep this site and you guys... this community. Getting her to go fast RIGHT NOW on a budget is going to shut the naysayers up right quick, and I'm banking on it bringing some serious attention to this seemingly humble little bubble of a car.
After running preliminary numbers on the cost of raw materials, my aim for this intake is 160 bucks shipped at the most. If I can do it cheaper I will, but at the very least this intake will be far more affordable than anything else out there, and you won't be skimping on quality. Trust me, this little intake... hahaha. Its pretty sweet.
Want to make this happen faster? Post in this thread and tell us you'll be in on the group buy... which, by the way, will knock that price down even more. Give us an idea of what demand would be like, because how cheap we can do this relies on how many we are planning on selling. Right now I'm under the assumption that this is going to be a one or two time deal, but if you guys want to see this stay on the market, I need your help! Buy 'em while they're dirt cheap!
PetersRedYarisThe Black Hills of South Dakota · Mar 7, 2007#14A non-cold air intake interests me. I don't want my filter down low in front of the car getting wet. Is it a dry filter or oiled and what brand?
ChinoCharlesThread starterOH · Mar 7, 2007#15It is oiled and it is the generic Autozone style "Power Adder." Remember, this is just a mockup! However, for all intents and purposes my filter is a silver K&N. Came with the same warranty... I'd bet you they're made by the same people.
Which brings me to another question... what type of filter would you guys like to see? I even threw around the idea of selling these with no filter and keeping them REALLY cheap. I know there have been threads about the best filter, and of course like anything else on these forums nobody can agree. 😉 What do you guys think? Oiled? Dry? K&N? Something else? Or just screw it, sell the pipe and let the buyer choose what type of filter he wants?
eTiMaGoBangkok, Thailand · Mar 7, 2007#16 Originally Posted by
ChinoCharles ↑ It is oiled and it is the generic Autozone style "Power Adder." Remember, this is just a mockup! However, for all intents and purposes my filter is a silver K&N. Came with the same warranty... I'd bet you they're made by the same people.
Which brings me to another question... what type of filter would you guys like to see? I even threw around the idea of selling these with no filter and keeping them REALLY cheap. I know there have been threads about the best filter, and of course like anything else on these forums nobody can agree. 😉 What do you guys think? Oiled? Dry? K&N? Something else? Or just screw it, sell the pipe and let the buyer choose what type of filter he wants?
Actually you might be on to something here... Some people might prefer a K&N cone filter, some might prefer an HKS mushroom filter, etc... Giving the customer the choice is not a bad idea.
ChinoCharlesThread starterOH · Mar 7, 2007#17That is the nice thing... I am going to do what you guys want! How many times does the manufacturer come to the community beforehand and actually ASK WHAT THE HELL THEY WANT.
WHAT A NOVEL FUCKING CONCEPT.
So, c'mon, vote on it... if you have any ideas I haven't mentioned, spill it! Lets get some dialogue going so in a few days I have a nice, full thread to reference when we finally sit down with some pipe.
blake111887South Amboy NJ · Mar 8, 2007#18this has to be the best thing ive seen or heard of so far, dude i really trhink that ifyou get this goin for as cheap as you say you can, and even cheaper depending on demand as you said, you should get some real feedback from yaris enthusiast such as ourselves.
Hell ive wanted an intake system for my yaris for about 2 1/2 months now but they are sooooooo expensive. And if you want help with the marketing i could help there as far as creating ads, and posters and what not, message me if you feel like it
but definitely go through with this one.
eTiMaGoBangkok, Thailand · Mar 8, 2007#19wow, good to have someone else so knowledgeable on board 🙂
Vortex MAF sensors sound quite complicated, but it does sound like they will not slowly get less accurate over time.
Keep us posted on progress!
ChinoCharlesThread starterOH · Mar 8, 2007#20 Originally Posted by BASKIN.N/A-HONDA ↑
It's the horsepower stupid!
I'm getting that tattooed on my ass.
Parted out Scion xA intake: $35 overnighted via FedEX
"Ugly Betty" ghettotake: $65 on Visa debit card
Seeing Baskin post on a Yaris forum: Priceless.
There are some things in the world Hitler would find funny.
This is one of them.
eTiMaGoBangkok, Thailand · Mar 8, 2007#21 Originally Posted by
ChinoCharles ↑ I'm getting that tattooed on my ass.
so as to attract horses to your ass? you sick sick twisted little man...
ChinoCharlesThread starterOH · Mar 8, 2007#22🤷
ChinoCharlesThread starterOH · Mar 8, 2007#23Bump for interest!!!
Betty 2.0 begins tonight! We've got pipe, plate and a coupler for the TB!
NutzoidsPhiladelphia · Mar 8, 2007#24 Originally Posted by
ChinoCharles ↑ Bump for interest!!!
Betty 2.0 begins tonight! We've got pipe, plate and a coupler for the TB!
Chino... How much will it be?
😈
[FR] Sébastien LoebSwitzerland · Mar 8, 2007#25when buliding an intake with many pieces and tubes combain together, the air flow will not flow as free as an intake that is build with just one or two tubes together such as most of the aftermarket intake kits ( TRD, AEM, ect...) therefore you are better off getting an aftermarket intake kit to get the most air flow out of it.
ChinoCharlesThread starterOH · Mar 8, 2007#26 Chino... How much will it be?
😈
Lets just say in a group buy situation you're looking at about 80-100 bucks shipped with no filters... maybe even less if we can get 15 or 20 people in on it. We still haven't sourced all necessary parts, so it'll be a few days before we know for sure...
when buliding an intake with many pieces and tubes combain together, the air flow will not flow as free as an intake that is build with just one or two tubes together such as most of the aftermarket intake kits ( TRD, AEM, ect...) therefore you are better off getting an aftermarket intake kit to get the most air flow out of it.
Shut your face Loeb! 🤣 No, you're right... the smoother the pipe, the better the flow. However, the finished version will have two couplers, and only one will be funtional in air flow... two pipes, one with the MAF adapter, and two couplers, one for the throttle body and one for the 2" to 3" flare... other than that, straight aluminized steel pipe. I told you... that was just the mockup! If you want to spend 150 extra bucks (at least) to avoid one little coupler, be my guest! But please, spare me a lecture on the basics.
jdubau55Blacksburg, VA · Mar 8, 2007#27Its all on how you pieced it together. As long as the "steps" were placed right. Say the first connection in inside and the second outside. Then the air never encounters a "lip" to flow over.
[FR] Sébastien LoebSwitzerland · Mar 8, 2007#28 Originally Posted by
jdubau55 ↑ Its all on how you pieced it together. As long as the "steps" were placed right. Say the first connection in inside and the second outside. Then the air never encounters a "lip" to flow over.
Even with the connection from In to Out, the air flow still does not flow as free as a one piece pipe, also the In to Out connection limits the air flow due to the tube being narrow down more and more as you connect it from In to Out.
Originally Posted by BASKIN.N/A-HONDA ↑
good job and well spoken jdubau55, at least somebody's thinking before they speak.
yes, think again before you speak
CASTREXCosta Rica · Mar 9, 2007#29Is Chino making an intake for a Ferrari or something?
Mr. Loeb is totally right guys! With all those parts you will be loosing maybe 10%-15% of the power that a fancy intake can give you due to flow inefficiency.
Supposing a 4-5 hp gain, a 15% loss will be 0.6 - 0.75 hp.
So..... 0.75 hp Vs. $150 saving. What do you think???
Good luck with your business Chino! 👍 Too bad I already have one of the fancy intakes... otherwise I will be sending you my cash for sure.
ChinoCharlesThread starterOH · Mar 9, 2007#30 Originally Posted by
CASTREX ↑ Is Chino making an intake for a Ferrari or something?
Mr. Loeb is totally right guys! With all those parts you will be loosing maybe 10%-15% of the power that a fancy intake can give you due to flow inefficiency.
Supposing a 4-5 hp gain, a 15% loss will be 0.6 - 0.75 hp.
So..... 0.75 hp Vs. $150 saving. What do you think???
Good luck with your business Chino! 👍 Too bad I already have one of the fancy intakes... otherwise I will be sending you my cash for sure.
Thanks for the kind words CASTREX.
If it makes you guys feel any better, I finally have my appointment at the dyno this Sunday. The regional Mustang Dyno tech is coming in to make sure this time around our readings are accurate. I am not even going to bother dynoing the Megan header again. The goal is by Sunday we want to have the production prototype finished and on the car so we can get accurate readings. The mockup that is on there now would read out at a tad less power due to the 1/4" wall sitting in the piping right now. I'll take lots of pictures.
blake111887South Amboy NJ · Mar 9, 2007#31cool, hope the dyno testing goes well, i still think that when you have the product all finished and done with its going to be something to brag about, i mean tlike you said this is a mock up product not the real deal so if you get the project on the way then i think that this will be a performance part a lot of yaris owners will want to have.
ChinoCharlesThread starterOH · Mar 9, 2007#32I have a LOT of help. I can't weld, CNC machine, use a drill press... I'm wrenchtarded. You guys saw how well the header install went. 😆 There are a lot of people here involved in this project... you'd be amazed how the old-school tuners light up when you tell them you want to put spray in a 1.5 L econobox, or when you tell them you have a working prototype of a possible production intake. Even Chris... he's all the way in New Jersey but I couldn't have done this without him.
Don't thank me, thank them... and yourselves for that matter. The feedback we're getting is encouraging to say the least. Exciting is more like it... and it seems every problem I come across, you guys have an answer. Even some of the ones I'm not aware of yet (like the FPR in the tank) are brought to my attention without me even asking.
You guys kick ass. If I can get a cheap intake built with a little help from my friends, its the least I could do.
PetersRedYarisThe Black Hills of South Dakota · Mar 9, 2007#33What about ONLY making a piece to mount the m.a.f.? By keeping all the origional rubber hoses present, one could remove the entire plastic airbox, mount the m.a.f. in this new short piece of pipe, and put a filter on that. It would be short, it would have good flow, and it would be EXTREMELY simple to produce. I only ask this because I would like to keep that small rubber hose where it is and have no second "tiny filter".
Oh yeah, good work Chino!!!
jdubau55Blacksburg, VA · Mar 9, 2007#34The steps arent something a lil silicon gel applied to the joint to make it a smooth transition wouldnt take care of. Also, as long as the last piece is the same size as the TB opening it wont really matter. When you decrease the size it increases the pressure as well. Im no fluids engineer, but maybe a slightly larger at one end going to slightly smaller at the other would make a better intake? In anyway the amount lost from this system pieced together like it is will never be noticed. Even on a dyno the difference would probably go un-noticed.
Great job with this CC. I like seeing people that don't just go out and buy what is the "best" but rather DIY and get good results. You get more satifaction that way.
eTiMaGoBangkok, Thailand · Mar 9, 2007#35 Originally Posted by
PetersRedYaris ↑ What about ONLY making a piece to mount the m.a.f.? By keeping all the origional rubber hoses present, one could remove the entire plastic airbox, mount the m.a.f. in this new short piece of pipe, and put a filter on that. It would be short, it would have good flow, and it would be EXTREMELY simple to produce. I only ask this because I would like to keep that small rubber hose where it is and have no second "tiny filter".
Oh yeah, good work Chino!!!
That is more or less what I have, but there's not really enough space due to the length of that first piece of tubing.
ChinoCharlesThread starterOH · Mar 9, 2007#36There seems to be a misunderstanding regarding the smoothness of the interior of our proposed production intake. Let me clarify.
This intake kit will include a 2" to 2" coupler, a length of mandrel-bent 2" pipe with a welded MAF mount, a 2" to 3" coupler, a VERY short length of 3" tubing that will not be visible in the system, and a filter... and the necessary clamps. Now, think about this... the first joint is on the throttle body. You have 2" pipe coupled to 2" pipe with a 2" coupler. Smooth. Second joint is 2" pipe to 3" pipe, but the coupler is cone-shaped so the airflow coming into your 2" pipe still isn't hitting a flat surface (in relation to airflow). Everything is SMOOTH. The version on there isn't and it still works like a damn charm, so I have every reason to believe the next version will be that much better! Seriously, I feel bad for you guys that you can't sit in my car for a minute and hear that engine. I've had quite a tough time keeping my foot off the floor.
I WISH I HAD A FUCKING DIGITAL CAMCORDER! Anyone in Ohio willing to hook a video up for me?
Sure, we could manufacture the plates and sell them, but then what? You guys are talking about using silicon adhesive on your permanent intakes? I can't condone this shit! 😆 All kidding aside, the real reason is this... OK, so I make the plate and weld it in and we sell them. That is 75% of the work right there... you're going to pay 75% of the price. All you're getting over that is couplings (which are cheap as hell), hose clamps (which are also cheap as hell), a length of 3" pipe (cheap) and a filter. This is why I don't see any reason to just sell the MAF plate. Leaving the filter out... that is definitely going to be an option. I guess we will probably sell the MAF tubing also, but understand you're going to be paying close to what it would cost for the whole she-bang. 75% of the research, time, effort, work, bought parts and tools... have been associated with that little length of pipe.
blake111887South Amboy NJ · Mar 10, 2007#37hmm, interesting progress chino, still wishin best of luck, im actually wrkin on an intake design myself until you fabricate this one lol but i cant wait to purchase this dude. again best of luck.🙌
Black YarisToledo, OH · Mar 10, 2007#38 Originally Posted by
ChinoCharles ↑ There seems to be a misunderstanding regarding the smoothness of the interior of our proposed production intake. Let me clarify.
This intake kit will include a 2" to 2" coupler, a length of mandrel-bent 2" pipe with a welded MAF mount, a 2" to 3" coupler, a VERY short length of 3" tubing that will not be visible in the system, and a filter... and the necessary clamps. Now, think about this... the first joint is on the throttle body. You have 2" pipe coupled to 2" pipe with a 2" coupler. Smooth. Second joint is 2" pipe to 3" pipe, but the coupler is cone-shaped so the airflow coming into your 2" pipe still isn't hitting a flat surface (in relation to airflow). Everything is SMOOTH. The version on there isn't and it still works like a damn charm, so I have every reason to believe the next version will be that much better! Seriously, I feel bad for you guys that you can't sit in my car for a minute and hear that engine. I've had quite a tough time keeping my foot off the floor.
I WISH I HAD A FUCKING DIGITAL CAMCORDER! Anyone in Ohio willing to hook a video up for me?
Sure, we could manufacture the plates and sell them, but then what? You guys are talking about using silicon adhesive on your permanent intakes? I can't condone this shit! 😆 All kidding aside, the real reason is this... OK, so I make the plate and weld it in and we sell them. That is 75% of the work right there... you're going to pay 75% of the price. All you're getting over that is couplings (which are cheap as hell), hose clamps (which are also cheap as hell), a length of 3" pipe (cheap) and a filter. This is why I don't see any reason to just sell the MAF plate. Leaving the filter out... that is definitely going to be an option. I guess we will probably sell the MAF tubing also, but understand you're going to be paying close to what it would cost for the whole she-bang. 75% of the research, time, effort, work, bought parts and tools... have been associated with that little length of pipe.
A) I have a digital Cam
B) I live in Ohio
ChinoCharlesThread starterOH · Mar 10, 2007#39 Originally Posted by
Black Yaris ↑ A) I have a digital Cam
B) I live in Ohio
What are you doing tomorrow at noon? I could stand for two hours on the turnpike. 😁
PetersRedYarisThe Black Hills of South Dakota · Mar 10, 2007#40eTiMaGo, Where did you get that intake and what did you pay?
eTiMaGoBangkok, Thailand · Mar 10, 2007#41It's cobbled together from a Simota filter and casing, and some tubing. The workshop here had the MAF holder, though I am not sure if they fabbed it themselves or it was pre-made.
ChinoCharlesThread starterOH · Mar 10, 2007#42I'm going to Toledo tomorrow... Joe (Black Yaris) was nice enough to agree to take some video w/ sound clips of ugly Betty. Not only that, but I can stand next to the TRD intake and compare the two. NOICE!
Black YarisToledo, OH · Mar 10, 2007#43Hmm... Chino, Says you are online, yet I lust talked to you a bit ago, and I am sure you are about 3/4 the way here now..... you got some crazy wireless computer set up in that Yaris of yours or something? Geuss we'll see in a few.
OH YEAH OHIO YARII MEET AT MY HOUSE TODAY
1. Black Yaris
2. ChinoCharles
Geuss that about does it for Yarii in Ohio
ChinoCharlesThread starterOH · Mar 10, 2007#44HUGE thanks to Joe (Black Yaris) for a nice day of talking Yarii.
He took video of ugly betty and it should be posted shortly. He has the TRD intake and I can tell you Betty sucks harder and growls louder. She's a man eater. Whether or not she actually makes power... we will know tomorrow.
Joe was nice enough to hook me up with some blue parking LED's and a black front T badge too. What a guy! 👍 Yaris owners... the coolest around.
I'll post pictures later. I'm late for work!
Black YarisToledo, OH · Mar 10, 2007#45Video will be up tonight..... I just have to figure out my wife's camera 🤷
Ya'll will be suprised one how nice this intake sounds, it don't look that bad for a prototype either
ChinoCharlesThread starterOH · Mar 10, 2007#46ChinoCharlesThread starterOH · Mar 11, 2007#47I crunched the numbers on my trip out to Toledo today.
First of all, my average speed was 80. I touched 115 once, other than that I kept between 80 and 85, but to be fair we'll call it 80. I drove 269 miles including a couple of short city trips afterwards that amounted to about 5 miles. I filled up before I left because I was curious to see if the intake had any effect on gas mileage. I get back and go to the station and fill up again. From what I have read around the forums, I should be looking at around 30 MPG. I fill up at 8.1 gallons.
33.2 MPG.
Now, confirm or deny my thinking on this. I haven't run this by anyone yet.
I don't know if this engine is necessarily getting colder air as the intake is placed in the engine bay, but I can say that it is getting more air. You can hear it. The MAF sensor measures this increased flow and outputs this information in the form of a high-frequency signal. The ECU reads this signal and adjusts the air/fuel ratio accordingly... it will either run rich or lean depending on what the throttle body is demanding. Cars generally fluctuate between rich and lean constantly, a fact that you will become accustomed to if you ever get an AFR gauge. Anyway, since the engine is getting more air it needs less fuel to start a combustion reaction. This is the basis of an engine... oxygen catalyzes the reaction that occurs when a spark is added to fuel. More oxygen means the car will know it needs less fuel to get going, and in this way an intake can affect gas mileage.
Also, by this logic then an intake by itself on a car is NOT a speed mod. It is an economy mod, unless you have the supporting mods to get MORE fuel into the cylinder DESPITE what the MAF is telling the ECU. This is why an adjustable fuel pump and some type of tuning software is necessary to make a true performance-oriented 1NZ, no matter how you're getting oxygen into the cylinder. (NOS, turbo, supercharger, etc)
Am I right on this?
TrancosRtS Florida · Mar 11, 2007#48Can't help you with the logic Charles, but while more oxigen accounts for less fuel, you still need a fuel + oxigen mix, so there is only so much fuel you can save (if you follow my drift). However, I suck at chemistry, so ignore my comments if you want (I, like you, am a CS student... C++ rulez :P)
BTW, I'm up for one of these intakes! (Specially if you an keep it in the <=$100!).
jdubau55Blacksburg, VA · Mar 11, 2007#49Wonder what it would cost to get some of the adapters ran at an injection molded plastics plant? If I could get my hands on an adapter I could make a quick 3D model to send out to different vendors to get a price quote on. However, there is an adapter that you can purchase at like Autozone right? It's just not available yet?
Black YarisToledo, OH · Mar 11, 2007#50jdubau.. you taklin abou the MAF adapter? Yeah that has to be machined, and/molded in plastic