Yarisworld Archive

Selling tC (leather) Steering Wheel

11 posts · 3,370 views

Focus_Sh1ftOriginal postNew Jersey · May 4, 2012#1
Selled it.

Replies 10

Betriventedmonton · May 4, 2012#2
Before anybody asks, this does fit in the yaris. Slight quirks are that the clockspring will be slightly to either side so one turn signal will be slightly longer, and shorter respectively. Hardly ever, EVER noticeable though.

Also, the stock yaris airbag doesn't fit snug, but it isn't enough to be noticeable.. ever.
CrankyOldManWest Michigan · May 4, 2012#3
If the wife's van didn't need a new wheel bearing, I would seriously consider this.
MUSKOKA800Chatham, Ontario, Canada · May 5, 2012#4
Bump of a great upgrade at a bargain basement price. No more sweaty palms for the new owner.
Focus_Sh1ftThread starterNew Jersey · May 5, 2012#5
Thanks for the kind words guys.

If the wife's van didn't need a new wheel bearing, I would seriously consider this.
You sure it isn't time to just cut your losses and sell it so you can buy this wheel? 😈
sqcompBack at home · May 6, 2012#6
Is there a tutorial on removal and installation of this somewhere?
Focus_Sh1ftThread starterNew Jersey · May 6, 2012#7
No DIYs but here's install pics:
Steering Wheel question

Also, see Betrivent's post above.

Installation should be simple though and very similar to what I did on the tC. I believe you'll need T27 torx to get the airbag unfastened. Then you pop the clips out of the back of the airbag and unplug anything attached to the clock spring (there's probably a harness for at least the horn). There's probably a 19mm locking nut holding the wheel to the steering column. Take that out, shake the wheel loose, replace with tC wheel, then replace everything. Should be a 10 minute job.
CTScottUSA, CT · May 7, 2012#8
Originally Posted by Focus_Sh1ft ↑
No DIYs but here's install pics:
Steering Wheel question

Also, see Betrivent's post above.

Installation should be simple though and very similar to what I did on the tC. I believe you'll need T27 torx to get the airbag unfastened. Then you pop the clips out of the back of the airbag and unplug anything attached to the clock spring (there's probably a harness for at least the horn). There's probably a 19mm locking nut holding the wheel to the steering column. Take that out, shake the wheel loose, replace with tC wheel, then replace everything. Should be a 10 minute job.

It is about that simple. The video below shows the actual removal of the steering wheel. Just be careful not to spin the clockspring while the steering wheel is off. Taping it as shown it the video ensures that it won't get rotated.

http://www.youtube.com/watch?v=LgWSzVeILhc
sqcompBack at home · May 7, 2012#9
Hmmm...

I am getting "tired" of my regular wheel...
sqcompBack at home · May 8, 2012#10
It's MINE! I think I'll like this wheel.
Focus_Sh1ftThread starterNew Jersey · May 8, 2012#11
I KNOW you'll like this wheel 😁

Oh and thanks for the vid Scott.