Yarisworld Archive

Steering Wheel question

27 posts · 17,530 views

heeroyuy01195Original postFlorida · May 17, 2011#1
Hi all,

does anyone know if a 2010 scion tc steering wheel will fit our cars and still retain function of the airbag? Are there any other options out there for a solid colour leather steering wheel? I read that the xD and xB steering wheels fit but they only come in two-tone leather. I want an all black leather steering wheel but I want to retain use of my airbag and also keep an OEM look. Thanks in advance.

Replies 26

bzinn 1University Place,WA · May 18, 2011#2
The steerign wheel from the tC fits,that is what I put in mine....came out of a 2006 tC....dont know about the new tC if it will fit or not.

Mine I was able to bolt the thing in like it was stock,the airbag is not a perfect match fit tot eh wheel curves but it is close enough and feels way better than the plaxtic one that came in the car stock.

Pretty sure there is a picture on the thread Divorce forces me to modify of mine installed,most likely the last page.

To install it I found that a small tab on the wheel needs trimmed off,it gets in the way of how the wheel lines up with the blinker return ring.
heeroyuy01195Thread starterFlorida · May 19, 2011#3
Thanks for the tip bzinn. Did you just swap over the airbag system from the Yaris wheel to the tC wheel? The wheel I'm getting is from the 1st generation tC (bought in 09 as a 10 model), not the new one that came out recently.
bzinn 1University Place,WA · May 29, 2011#5
Yep just transfer the airbag over to the new wheel.....very close to perfect fit on the cover on the angles of the curves....you will see...it works good.


Not sure about the Corrolla wheel.
heeroyuy01195Thread starterFlorida · May 30, 2011#6
Thanks bzinn. I don't suppose you would know if the scion airbag could be wired to work on the yaris would you?
CTScottUSA, CT · May 30, 2011#7
Originally Posted by heeroyuy01195 ↑
Thanks bzinn. I don't suppose you would know if the scion airbag could be wired to work on the yaris would you?
Any Toyota/Lexus/Scion dual squib airbag will work. If you find a wheel with a single squib airbag, then to use it you would have to connect a 3ohm resistor across the second airbag connector to keep the SRS ECU happy.
heeroyuy01195Thread starterFlorida · May 30, 2011#8
Originally Posted by CTScott ↑
Any Toyota/Lexus/Scion dual squib airbag will work. If you find a wheel with a single squib airbag, then to use it you would have to connect a 3ohm resistor across the second airbag connector to keep the SRS ECU happy.
Scott, thanks a bunch for that bit of information; that really helps a lot. When I eventually get my hands on the wheel do you mind if I shoot you a PM when I do the installation? I'll be putting up a full write-up when I get around to doing this.

edit: I know this might be a bit late but...will I need to do anything to get the horn to work?
CTScottUSA, CT · May 30, 2011#9
Originally Posted by heeroyuy01195 ↑
Scott, thanks a bunch for that bit of information; that really helps a lot. When I eventually get my hands on the wheel do you mind if I shoot you a PM when I do the installation? I'll be putting up a full write-up when I get around to doing this.

edit: I know this might be a bit late but...will I need to do anything to get the horn to work?
Definitely hit me up if you have questions. The horn will connect the same.
marcustoronto, canada · May 31, 2011#10
i would love to get 2011 scion tc steering wheel on my yaris...
CTScottUSA, CT · May 31, 2011#12
I actually have a Scion TC leather steering wheel on Crashy. The Yaris airbag cover doesn't fit it perfectly, so ideally you would want the TC airbag:

Picture not included in this copy
PROX4x4CO · Jul 21, 2011#13
Originally Posted by CTScott ↑
I actually have a Scion TC leather steering wheel on Crashy. The Yaris airbag cover doesn't fit it perfectly, so ideally you would want the TC airbag:

Picture not included in this copy
Scott,

Do you have the door lock actuators from the Crashy somewhere? I am looking into installing those in my car (08 2dr).👍
CTScottUSA, CT · Jul 21, 2011#14
Originally Posted by PROX4x4 ↑
Scott,

Do you have the door lock actuators from the Crashy somewhere? I am looking into installing those in my car (08 2dr).👍
She was all manual for locks and windows.
heeroyuy01195Thread starterFlorida · Jul 23, 2011#15
Well this was supposed to happen a long time ago but unfortunately the guy I was getting the wheel from backed out. I've since put the money towards my other car as I'm trying to just get the damn thing finished already (on-going project since 04'); Yaris is on the back burner now (although it did make out like a bandit and get some goodies out of me before the decision so I've got some stuff I need to install on it).
caineroadToronto · Jul 24, 2011#16
i want to know if 2011 wheel can do it
CTScottUSA, CT · Jul 24, 2011#17
Originally Posted by caineroad ↑
i want to know if 2011 wheel can do it
The airbag cover is completely different on a 2011, so if the spline is still the same it will fit, but you'd also need the complete airbag assembly.
weedtankCA · Aug 4, 2011#18
If you have the the complete steering wheel with airbag, will it be a direct bolt on?
CTScottUSA, CT · Aug 4, 2011#19
Originally Posted by weedtank ↑
If you have the the complete steering wheel with airbag, will it be a direct bolt on?
I haven't seen the airbag connectors on the 2011 TC yet, to know if it is a direct bolt on and plug and play.
weedtankCA · Aug 4, 2011#20
Originally Posted by CTScott ↑
I haven't seen the airbag connectors on the 2011 TC yet, to know if it is a direct bolt on and plug and play.
How about the older tC models?
heeroyuy01195Thread starterFlorida · Aug 4, 2011#21
If I got my hands on the tc airbag cover, could I possibly swap it with the yaris airbag cover? In other words, could I use the tc steering wheel and airbag cover but use the yaris airbag? Or would I need the tc airbag and cover? I just don't like the idea of the yaris cover not fitting the tc wheel perfectly (bad case of OCD I guess).
CTScottUSA, CT · Aug 4, 2011#22
The older TC ones have the same connector, and from a quick search it looks like the 2011 does as well.

As for swapping guts under the cover, there's a thread on here where I show what is involved in doing so. I took apart a popped one, which has none of the danger associated with doing so with a live one.
CTScottUSA, CT · Feb 24, 2012#23
Originally Posted by TOLMACH ↑
Does anyone know if japanese steering wheel will fit the 2009 liftback (Canadian version)?

Thanks

http://injapan.ru/auction/x208512722.html
That would fit, but the airbag is missing. The airbag cover and the horn switch are there, but the airbag itself is not.
CTScottUSA, CT · Feb 24, 2012#24
Originally Posted by TOLMACH ↑
Thank you!

I understand that if I buy this one,, that is gonna be sort of gambling whether my airbag fits it ((
You would have to transfer the airbag squib assembly over, since the cover is completely different. It would fit, but moving it over would be very difficult and dangerous.
tk1971SG Valley, SoCal · Mar 2, 2012#25
Originally Posted by CTScott ↑
I actually have a Scion TC leather steering wheel on Crashy. The Yaris airbag cover doesn't fit it perfectly, so ideally you would want the TC airbag:

Picture not included in this copy
Picture not included in this copy

I just cut a piece of hard rubber, lifted the bottom spoke leather cover of the TC steering wheel and glued it in. I then glued the leather onto the hard rubber.

I could have done a better job fitting it with my airbag, but I got lazy and eyeballed it. Looks like the spoke is now touching the airbag, but there's a small gap.
tk1971SG Valley, SoCal · Mar 5, 2012#26
Originally Posted by TOLMACH ↑
Thanks, man

Is the leather glued to the plastic underneath ? Was is easy to lift the leather cover?

(Considering couple ideas)
With the wheel off the car, the leather easily peeled off. I did re-glue the leather onto the hard rubber underneath. I used industrial contact cement available at Home Depot / Lowes.

There's just not too much leather there to begin with on that steering wheel spoke, so I tried to straighten out the gap.

If you were to do some fitting beforehand, you can get it to look lots better than I did.

Good luck.