packetraceOriginal postQuebec · Apr 17, 2012#1Hi everyone, I had already started a thread like one year ago but it was a very basic install
Now i will do it much better....I base it on SQcomp and DerickVeliz install...they are very nice guy and always ready to help...
Until now i have ordered
37.5sqft of MAT from
RAAMaudio 42 sqft of Peel and stick from the same place
Hybrid Audio Technologies tweeter L1Version2 from soundsolution
I plan to buy
Hertz audio midrange driver HL-70
HAT L6 for midbass
Powerbass ASA 700.5X 5 channel...4x50W RMS and 1x200W RMS
HU with 3 RCA ouput and crossover OR HU with active filter👍
Other sound deadending product from DON at
http://www.sounddeadenershowdown.com/cgi-bin/index.cgi CLD TILES, CCF and MLV for floor
Extruded butyl rope for inside the doors
Velcro for CCFoam
And for the Subwoofer I haven't planned anything yet....I am open to suggestion...🤷
Replies 105
sqcompBack at home · Apr 17, 2012#2The sub(s) ....
Where do you want to place the woofer(s)?
packetraceThread starterQuebec · Apr 17, 2012#3Actually I have read the whole thread of Derick....I think you have come to the conclusion that is it better to place them at the front...
But I would like to get them in the trunk since we are almost always 2 in the car...
Mid and tweet will go in A-Pillar
Midbass will go in front door
Bass would fo in trunk......what do you think ?
packetraceThread starterQuebec · Apr 17, 2012#4I have a question for you...
I will probably go for passive system...
So I will have this
A mono amplifier for SUB
A 2 channel for MID BASS
A 2 channel for MID RANGE AND TWEETER......HERE IS MY QUESTION!!
If the channel can drive 100W RMS and if I use passive xover..does it mean the tweeter will have 50W and the MID RANGE will have 50W too ?🤷
derickveliz2Central, MA · Apr 18, 2012#5 Originally Posted by
packetrace ↑ I have a question for you...
A 2 channel for MID RANGE AND TWEETER......HERE IS MY QUESTION!!
If the channel can drive 100W RMS and if I use passive xover..does it mean the tweeter will have 50W and the MID RANGE will have 50W too ?🤷
Sorry, I really don't know how to answer that, my guess is depending on the x-overs design that's how the power will be delivered, and that the speaker produces lower notes will end up with more power than the tweeter itself.
D.
derickveliz2Central, MA · Apr 18, 2012#6Like I told you off-line we can trade/sell my a-pillars with the Mids in there, just plug your tweeter and you are all set, I know you don't want to spend that much money there either.
I may end up selling my 5 channel amp too. (just a heads up)
Talking about designing a system, the difference in control by going active or passive is day and night, also other part of the equation in your design is thinking about a head unit or a component like a Bit one by audison that gives you Time Alignment, EQ and many other fancy stuff. I can swear by Time Alignment it's some thing that I just can't live without!
Just my 2 cts.
D.
derickveliz2Central, MA · Apr 18, 2012#7 Originally Posted by
packetrace ↑ Actually I have read the whole thread of Derick....I think you have come to the conclusion that is it better to place them at the front...
But I would like to get them in the trunk since we are almost always 2 in the car...
Mid and tweet will go in A-Pillar
Midbass will go in front door
Bass would fo in trunk......what do you think ?
I think you are better of with the sub in the trunk, unless you want to go through all the process of building a complex enclosure that ends up with a funny shape. Even though the I6SW it's amazing after all the hard work.
Also, T/A helps a lot blending and centering the image in the center of the car. For many weeks I could tell that the boom boom was coming slightly from the right and not the center, Time Alignment was a key factor to get it right in the center.
I know this is an expensive hobby, but if you really want the beauty of the Music, you need to have" Active x-overs, Time Alignment, Digital EQ, at least.
others can add their own opinions I'm not a pro, I did learn a lot from my trail and errors in my build, but if I had to do it again, it wouldn't be much different from now, than just more expensive amps, and maybe using all Hybrid-audio gear to be consistent.
We are here to help.
D.
packetraceThread starterQuebec · Apr 18, 2012#8Thank you very much Derick!
I think I will start with passive for the moment....and maybe I will switch to active when I get more money haha
Could you make a sketch for me and correct me if I am wrong..
I will buy a HU with 3 or 4 output ? (I want my HU to go directly to AMP, no audiocontrol...)
Does the tweeter and midrange goes on same channel with xover ?
How much power you put into l1v2 ?
sorry for all my naive question :S
WeeYariGeorgetown, Ontario, Canada · Apr 18, 2012#9packetraceThread starterQuebec · Apr 18, 2012#10 Originally Posted by
WeeYari ↑
They are really nice!!! I would really like to get some thing like this!!!
They are much too far frome me but..it gives me a lot of idea👍
packetraceThread starterQuebec · Apr 18, 2012#11FYI
I order a PowerBass ASA 1100.5x!!!
Its the same then Derick uses...
It got 5 channel
SQCOMP and DERICK CAN YOU CORRECT ME....
Channel 1-2 goes to passive crossover and cross over goes to tweeter and midrange
Channel 3-4 goes to midbass
Channel 5 goes to sub
is it corect ??🤷
That would be for a passive setup...
Later on I will change for active with a very nice HU like P99 but its not for now...
packetraceThread starterQuebec · Apr 18, 2012#12I just ordered this..
Stinger distribution block
Stinger 6 channel RCA 17'
Stinger amp wiring kit
packetraceThread starterQuebec · Apr 19, 2012#13I am looking at these...
MINIDSP Its a member on DIYMA that suggested me to go for these...you set the filter with an app on the computer...
It would be a nice passive setup...that I can change the filter if I want to...
SQCOMP I am waiting the quote for the L3 and the HL-70...I am ready to buy :)
When I get the L3 I plug the L1 and L3 on the Powerbass amp...Then I will look at the sub and pick up one...At that moment it will be a 2way + sub...will only be missing midbass and its amp!
derickveliz2Central, MA · Apr 19, 2012#14CAPS ARE MINE... Originally Posted by
packetrace ↑ Thank you very much Derick!
YOU ARE WELCOME
I think I will start with passive for the moment....and maybe I will switch to active when I get more money haha
I WOULD JUST GO SLOWLY ACTIVE.
Could you make a sketch for me and correct me if I am wrong..
DO YOU STILL NEED THIS?
I will buy a HU with 3 or 4 output ? (I want my HU to go directly to AMP, no audiocontrol...) THERE IS A SMALL VERSION (NEW) OF THE P99 THAT COMES READY FOR FRONT STAGE.
Does the tweeter and midrange goes on same channel with xover ? YES
How much power you put into l1v2 ? 75 WATTS
sorry for all my naive question :S
NO PROBLEM
D. derickveliz2Central, MA · Apr 19, 2012#15 Originally Posted by
packetrace ↑
SQCOMP and DERICK CAN YOU CORRECT ME....
is it corect ??🤷
Channel 1-2 goes to passive crossover and cross over goes to tweeter and midrange
YES Channel 3-4 goes to midbass
YES (MID OR MIDBASS = 3" SPEAKER OR 6.5" SPEAKER)
Channel 5 goes to sub
YES D.
packetraceThread starterQuebec · Apr 19, 2012#16Thank you again Derick! :D
Here is the Schema I have in my head...🎉
Picture not included in this copy
What do you think ? 👍
And some when I will go active with a P99 and put the mini DSP in the closet!😉
derickveliz2Central, MA · Apr 20, 2012#17 Originally Posted by
packetrace ↑
I will go active with a P99 and put the mini DSP in the closet!😉[/COLOR][/SIZE][/COLOR]
Looks to me that using the mini DSP is going active, passive crossovers go after the amp before speakers. The diagram looks good, I watched the video for the mini DSP and even I know what they are talking about looked so complicated, it had no audio?, then I downloaded the manual and the same, I maybe sleepy but it feels too much for me, but at the same time interesting. and at $125 bucks each!
There is some thing about the P99 that makes all adjustments so easily and on demand, driving at any time. any way here are some samples of passive x-overs:
Picture not included in this copy Picture not included in this copy Picture not included in this copy D.
packetraceThread starterQuebec · Apr 20, 2012#18I may be buying one to see what I could do with it...it's not that expensive...
You made me realize that it is an active setup that I would build....well that will be better...where was I...its obvious that it is active😆
How much is rated the P99 ?
I have read a lot on it and I dream of having it in my car but I know it is out of my budget....It looks so easy to adjust all the settings...and as you says it..ON DEMAND 👍
WHat is the small model that you have been talking about ? ready for front stage ?
Front stage is TWEETER, MIDRANGE, MID BASS ?
?
sqcompBack at home · Apr 20, 2012#19What do you mean "How much is rated the P99?"
Are you asking about the power output of the source? If that's the case, the deck itself does not put out any Wattage...it's a tuner. My P-01 comes with a little 6 channel amplifier...It's a feature on the JDM P-01.
packetraceThread starterQuebec · Apr 20, 2012#20I meant the price :)
packetraceThread starterQuebec · Apr 20, 2012#21And what is the small model of the p99?
Derick said it is ready for front stage..
derickveliz2Central, MA · Apr 21, 2012#22 Originally Posted by
packetrace ↑ I may be buying one to see what I could do with it...it's not that expensive...
You made me realize that it is an active setup that I would build....well that will be better...where was I...its obvious that it is active😆
How much is rated the P99 ?
I have read a lot on it and I dream of having it in my car but I know it is out of my budget....It looks so easy to adjust all the settings...and as you says it..ON DEMAND 👍
WHat is the small model that you have been talking about ? ready for front stage ?
Front stage is TWEETER, MIDRANGE, MID BASS ?
?
* Front stage can be accomplish with 1 set of speakers, 2, 3 or 4, Front stage means you build a 3Dimentional virtual stage in front of you. At least that's how I visualize it. There are better ways to explain, but don't think a pair of Tweeters, Mids and Midbass it's a front stage. Picture not included in this copy Around $400 for the DEH-80PRS
LINK 1 P99RS is about 3 times that!
LINK 2 Picture not included in this copy D.
packetraceThread starterQuebec · Apr 21, 2012#23But the 80PRS is 2 way + sub...how to make it 3 way + sub...with my dsp ??
derickveliz2Central, MA · Apr 21, 2012#24 Originally Posted by
packetrace ↑ But the 80PRS is 2 way + sub...how to make it 3 way + sub...with my dsp ??
1 for sub
1 for lows
1 for Mids + Tweeter with passive x-over or use one of the MINIDSPs
if you don't like that go for the P99
there are other options too, that's not the end of the world.
D.
packetraceThread starterQuebec · Apr 21, 2012#25That sounds interesting!!
I am very interested in the P-99 but its too much for my budget even the 80-PRS is a bit high but the money is worth it!
derickveliz2Central, MA · Apr 21, 2012#26If you keep Mids and Tweeters close together passive x-over works ok, but if you do like me and Sqcomp Mids are far away from tweeters, then you need to go active.
D.
packetraceThread starterQuebec · Apr 21, 2012#27But your mids are in the a pillar mear to your tweeter as i know ?
derickveliz2Central, MA · Apr 21, 2012#28 Originally Posted by
packetrace ↑ But your mids are in the a pillar mear to your tweeter as i know ?
No, we have Mids down in kick area.
D.
packetraceThread starterQuebec · Apr 21, 2012#29Ohhh...they are no more in you a-pillar you had build ? I have missed a part of your build so...but for me they are reallly going to be in the a-pillar...
Probably going to de 80PRS with 1 Mini-DSP
BTW I received my L1V2👍👍👍👍
They are so beautiful!! Can't wait to start my a-pillar...I will order L3 this week!
Waiting to get price from SQcomp and compare from a dealer in Canada...
sqcompBack at home · Apr 21, 2012#30I shot you and e-mail or PM with pricing...
packetraceThread starterQuebec · Apr 21, 2012#31The last PM says that you may get better price then Canada dealer...and you asked me to tell you when I was ready so you can start the process of sale...I had answered that I was ready...and you did not answered me...🤷
may be there has been a bug with the server...👎
could you please send it back 😁
packetraceThread starterQuebec · Apr 21, 2012#32Just ordered one miniDSP!
packetraceThread starterQuebec · Apr 21, 2012#33👍👍
Picture not included in this copy
Picture not included in this copy
I know Derick and SQcomp have already played with them but for anyother...here is the picture of my Tweeter from Hybrid Audio Technologies!
Can't wait to fire them up!!!
derickveliz2Central, MA · Apr 22, 2012#34 Originally Posted by
packetrace ↑ Ohhh...they are no more in you a-pillar you had build ? I have missed a part of your build so...but for me they are reallly going to be in the a-pillar...
Probably going to de 80PRS with 1 Mini-DSP
BTW I received my L1V2👍👍👍👍
They are so beautiful!! Can't wait to start my a-pillar...I will order L3 this week!
Waiting to get price from SQcomp and compare from a dealer in Canada...
Post 1879... shows my system as of today (the TA is different though), When I realized that taking advantage of the PLDs
in favor of my stage the answer was more clever than ever,
Mids would go down in the kick area. That's why I offered trade+sell my a-pillars with HL-70s, Picture not included in this copy Picture not included in this copy Picture not included in this copy Picture not included in this copy Picture not included in this copy It would be very interesting to see how the MINIDSP works from the "End User" side, also the 80PRS versatility.
Congratulations on your new Tweeters! they are awesome, just don't play them lower than 3.2kHz at 24. Mine are playing from 10kHz.
For the a-pillar build remember to start with a very solid baffle,
Picture not included in this copy D.
.
packetraceThread starterQuebec · Apr 22, 2012#35 Originally Posted by
derickveliz2 ↑ For the a-pillar build remember to start with a very solid baffle,
D.
.
Sorry what means baffle ?😕
I can't wait to setup the mini dsp!
After I buy the L3V2...I'll start the A-pillar process...ans done I start the subwoofer fiberglassing in the trunk...and then I will be ordering the DEH-80PRS....just to give my bank account a break 😆
packetraceThread starterQuebec · Apr 22, 2012#36Any suggestion for a subwoofer ? at about 500W RMS....? I had tought of the IDQ12V3D4...but it is backorder on sonicelectronix...
derickveliz2Central, MA · Apr 22, 2012#37Baffle is the MDF ring you use to hold the speakers.
OK, this is my best shot, this would be my best advice from my experience and it's written in my thread some where.
👍
If you go with the 80PRS, the Tweeters on a-pillars, woofer in the trunk and (pay attention here) get the L6 (Midbass) and put them on the doors I assure you will sound much better than the Mids on the a-pillars, I've gone through a big process of comparing and if I where you I would go that way.
PLDs would be in your favor, you will be full active, enjoy the extra width of the stage provided by the L6s down in the doors, since the L6 can play up to 5khz really nice and your tweeters can go down to 5 easily. I do this exercise many times to show how good the L6s are and turn of my Mids, believe me it's true.
👍
D.
packetraceThread starterQuebec · Apr 22, 2012#38So you would suggest me to wait for the L3 and buy the L6 right now...and be 2-way + sub FULL ACTIVE ?😁
derickveliz2Central, MA · Apr 22, 2012#39 Originally Posted by
packetrace ↑ Any suggestion for a subwoofer ? at about 500W RMS....? I had tought of the IDQ12V3D4...but it is backorder on sonicelectronix...
How much to do you want to spend on the woofer, bend my arm and I may sell my IDQ
Picture not included in this copy Picture not included in this copy D.
packetraceThread starterQuebec · Apr 22, 2012#40Shipping will be expensive to Canada since it is probably very heavy...
is it the IDQ12V3D4 ?
I had expected 249.99 + shipping as it is on sonicelectronix...
PM me with your price...I am interested....
derickveliz2Central, MA · Apr 22, 2012#41 Originally Posted by
packetrace ↑ So you would suggest me to wait for the L3 and buy the L6 right now...and be 2-way + sub FULL ACTIVE ?😁
Yes and no, My point is that going this way it will have a better stage than 3 way with Mids in a-pillars,
In seconds I can turn off my mids and have a 2 way, it's not as spectacular as the 3 way for obvious reasons (PLDs) but sounds better than my old 3 way with Mids in a-pillars.
my 2cts
D.
packetraceThread starterQuebec · Apr 22, 2012#42Do you have pics of your mids and kick area as it is right now ?😁
derickveliz2Central, MA · Apr 22, 2012#43Post # 1794
Picture not included in this copy
D.
packetraceThread starterQuebec · Apr 22, 2012#44Are you going to fiberglass a kickpanel for the mids ?
And 2 questions..you relocated all the wires ? and you no more uses the parts that was covering this area ?
derickveliz2Central, MA · Apr 22, 2012#45 Originally Posted by
packetrace ↑ Are you going to fiberglass a kickpanel for the mids ?
And 2 questions..you relocated all the wires ? and you no more uses the parts that was covering this area ?
No I did not, and I'm not.
Yes, I extended the ground and move them a little up under the dash on both sides.
I may modify the covering in the future with a big opening but right now I have to finish other stuff.
D.
packetraceThread starterQuebec · Apr 22, 2012#46I just took a look at this part of your thread....WOW!! very nice what sqcomp have done with his doors and kickpanel!
That gives me a lot of idea....I'll do like you told me...start with tweeter in a-pillar and L6 in doors!...when I'll be good at fiberglassing I'll kickpanel mids!
You guys are awesomeee👍👍
packetraceThread starterQuebec · Apr 22, 2012#47I am very tempted to go for the DEH-80PRS....I found it at 281.95 + 26 $ shipping...!!!!
derickveliz2Central, MA · Apr 22, 2012#48 Originally Posted by
packetrace ↑ I am very tempted to go for the DEH-80PRS....I found it at 281.95 + 26 $ shipping...!!!!
where?
D.
packetraceThread starterQuebec · Apr 22, 2012#49HERE CLick on add to cart and it is 281.95!
packetraceThread starterQuebec · Apr 22, 2012#50Picture not included in this copy
What material is the gray piece made of ?😕
I am so curious..asking lot of question...sorry 🙁