Yarisworld Archive

Audio installation based on DerickVeliz and SQcomp!

106 posts · 34,089 views · page 2 of 3

Replies continued

derickveliz2Central, MA · Apr 22, 2012#51
Originally Posted by packetrace ↑

What material is the gray piece made of ?😕

I am so curious..asking lot of question...sorry 🙁

No problem! (O:

That is a Mock-up I made (from foam board) before cutting the MDF baffles.

D.
packetraceThread starterQuebec · Apr 22, 2012#52
Originally Posted by derickveliz2 ↑
No problem! (O:

That is a Mock-up I made (from foam board) before cutting the MDF baffles.

D.
So your final install is MDF baffle that you have screwed to the body ?

And do you think I should jump on the DEH-80PRS ? 🤷
derickveliz2Central, MA · Apr 22, 2012#53
Originally Posted by packetrace ↑
So your final install is MDF baffle that you have screwed to the body ?

And do you think I should jump on the DEH-80PRS ? 🤷
screwed and sealed to create an IB, I cut the metal inside the a-frame to fit the Mid.

on a budget I think a 2 way active the Yaris sounds great!

D.
packetraceThread starterQuebec · Apr 22, 2012#54
So if I resume...

L1V1 in A-Pillar as tweeter 5Khz and up
L6 in door as mid-range-midbass..100Hz up to 5kHz
Sub in trunk or some where else...100Hz and less

Powerbass 1100.5X 5channel amp for the whole setup..

Fiberglassing the trunk for sub...fiberglassing A-pillar for tweeter...fiberglassing doors for Mids!👍👍

Pionner DEH-80PRS in the deck 😁😁
packetraceThread starterQuebec · Apr 22, 2012#55
Just order this!!!!!😁😁😁 Things are going so fast 😆

Picture not included in this copy
packetraceThread starterQuebec · Apr 22, 2012#56
Just ordered

Stinger roller
Stinger Overkill dampening material....24sq-ft...
MDF 12'' ring
60oz Polyester Fiber fill👍
sqcompBack at home · Apr 22, 2012#57
Get on it! Good man. Come to Derick and I for any help you need.
packetraceThread starterQuebec · Apr 22, 2012#58
Originally Posted by sqcomp ↑
Get on it! Good man. Come to Derick and I for any help you need.
Thank yoU!!😁

So far I ordered..

DEH-80PRS, L1V2, Powerbass1100.5X, MAT and ENSOLITE, Stinger OVERKILL, Stinger power distribution block, Stinger RCA 6CH, Stinger 4ga amplifier wiring kit, MiniDSP which I won't need any more(well maybe one day), Stinger voltmeter blue display, 12'' MDF ring, 😁

I need : IDQ12V3D4 from Derick, L6V2 from sound solution, Big three cable, fiberglass material, Dash MAT(waiting for samples), more dampening material, MANY advices from both of you😁
packetraceThread starterQuebec · Apr 23, 2012#59
Yaris is being window tinted at the moment!
derickveliz2Central, MA · Apr 24, 2012#60
Originally Posted by packetrace ↑
Yaris is being window tinted at the moment!
The other night (around mid night) after the toll a police officer pulls me over, and asked me if I new why? I told him "no I have no idea officer"

officer "because the tint in your windows"

me "there is nothing wrong, it's legal in the state of Massachusetts to tint windows at 35%"

officer "yeah but did you install them?"

me "No, I had a professional do it"

officer "probably because of the dirt they look darker" "do you drink?"

me "Just water"

officer "it's ok if I run your ID into the system?"

me "please do so"

after 2 or 3 minutes...

officer "drive safely"

me "thank you"


I never had a speeding ticket or any other infraction since I was 16, hey that's more than 20 years!

D.
sqcompBack at home · Apr 24, 2012#61
Ol boy was searching for something to nail you on based on something you said. Great move D!
packetraceThread starterQuebec · Apr 24, 2012#62
Gonna have my new wheels and tire installed tomorrow :D

Maybe some new springs to lower it !!

Gonna paint calipers too :)

Any suggest ? :)
packetraceThread starterQuebec · Apr 24, 2012#63
Originally Posted by derickveliz2 ↑
The other night (around mid night) after the toll a police officer pulls me over, and asked me if I new why? I told him "no I have no idea officer"

officer "because the tint in your windows"

me "there is nothing wrong, it's legal in the state of Massachusetts to tint windows at 35%"

officer "yeah but did you install them?"

me "No, I had a professional do it"

officer "probably because of the dirt they look darker" "do you drink?"

me "Just water"

officer "it's ok if I run your ID into the system?"

me "please do so"

after 2 or 3 minutes...

officer "drive safely"

me "thank you"


I never had a speeding ticket or any other infraction since I was 16, hey that's more than 20 years!

D.

I am going to get arrested for sure...here in Quebec they are always looking at that...I tinted it at 20% for the passenger and driver window...it is legal only at around 50-70%...BUT my yaris has tu suffer to be awesome 😆

I have order the spoiler..it looks like the stock one..!!!
why?harnett county NC · Apr 24, 2012#64
never had anyone pull me over for my tint, and some of the more assholeish inspection places around me won't even give me a sticker because my tint is too dark for their antique broken down machines.
_S7V7N_South Texas · Apr 24, 2012#65
Lolll when I moved to Tx I called the place for my inspection and asked if I needed brights. I tried to convince the guy it didn't need them since it was a Toyota !
packetraceThread starterQuebec · Apr 24, 2012#66
You guys ate lucky! Here they tolerate nothing !!
packetraceThread starterQuebec · Apr 25, 2012#67
Tein springs ordered from MicroImage :D My bank account is crying right now :( Maybe L6 will wait...will use my PionnerPremier 6.5''as midrange for now...its not bad at all with sound deadending, L1V2, DEH-80PRS, IDQ12, :) Anyways I got alot of job to do on my install!
packetraceThread starterQuebec · Apr 26, 2012#68
Picture not included in this copy
derickveliz2Central, MA · Apr 26, 2012#69
Originally Posted by packetrace ↑
Picture not included in this copy
What's the offset? and what tire size are you going to use?

D.
g.q.viosOrange County · Apr 26, 2012#70
OHK I need help i seen your awsome pics of your guys setup's really nice wish i had some one down here w/ that kind of experince....

I have a lil probmlem i need mids i have highs and lows but need mids...

MY head unit Kenwood KDC-BT952HD 6 channel



4 channel amp is a Hi-Fonics 800 watts amp.. model #Hfi 100.4
in the front Infinity Kappa 63.9i 3-Way 6.5" 225W
in the back rear deck Kicker 07DS6930 DS-Series 6-Inch x 9-Inch 152mm X 229mm 3-Way Speaker

2 channel amp ... sub I like Its a Custom box w/ 2 kicker 10" in amps the power is a Rockford fosgate prime R500.1

MY question is How can i add so i can get mids.... the highs are their and the bass but no midss... do i need another amp and more speakers.... And if so where would i put the speakers.... thankyou let me know if i missed anything......


On my Hifonics amp the crossover is set to HPf Both of them So their set for Highs I think... THats why i say im confussed...Their is also a line out on the amp will take more pics for u later if u need them let me know...

🙌
g.q.viosOrange County · Apr 26, 2012#71
Originally Posted by g.q.vios ↑
OHK I need help i seen your awsome pics of your guys setup's really nice wish i had some one down here w/ that kind of experince....

I have a lil probmlem i need mids i have highs and lows but need mids...

MY head unit Kenwood KDC-BT952HD 6 channel



4 channel amp is a Hi-Fonics 800 watts amp.. model #Hfi 100.4
in the front Infinity Kappa 63.9i 3-Way 6.5" 225W
in the back rear deck Kicker 07DS6930 DS-Series 6-Inch x 9-Inch 152mm X 229mm 3-Way Speaker

2 channel amp ... sub I like Its a Custom box w/ 2 kicker 10" in amps the power is a Rockford fosgate prime R500.1

MY question is How can i add so i can get mids.... the highs are their and the bass but no midss... do i need another amp and more speakers.... And if so where would i put the speakers.... thankyou let me know if i missed anything......


On my Hifonics amp the crossover is set to HPf Both of them So their set for Highs I think... THats why i say im confussed...Their is also a line out on the amp will take more pics for u later if u need them let me know...

🙌
i Have it posted on micro image also w/ pics and everything... this site likes small pics....
😢
derickveliz2Central, MA · Apr 26, 2012#72
post the link to mi

D.
derickveliz2Central, MA · Apr 26, 2012#74
Originally Posted by g.q.vios ↑
MY question is How can i add so i can get mids.... the highs are their and the bass but no midss... do i need another amp and more speakers.... And if so where would i put the speakers.... thankyou let me know if i missed anything......


On my Hifonics amp the crossover is set to HPf Both of them So their set for Highs I think... THats why i say im confussed...Their is also a line out on the amp will take more pics for u later if u need them let me know...

🙌
What do you mean with mids?
Yes you need another amp for more speakers

Check your HU instructions, I think that's where you have to check first for tuning adjustments.

Everything else looks ok

D.
derickveliz2Central, MA · Apr 26, 2012#75
Originally Posted by g.q.vios ↑
i Have it posted on micro image also w/ pics and everything... this site likes small pics....
😢
Here are your pictures...

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
derickveliz2Central, MA · Apr 26, 2012#76
Originally Posted by g.q.vios ↑
On my Hifonics amp the crossover is set to HPf Both of them So their set for Highs I think... THats why i say im confussed...Their is also a line out on the amp will take more pics for u later if u need them let me know...

🙌
Also try to turn of the x-over on the amps, your HU should be able to control that, but go gentle on the volume, don't let the speaker clip.

D.
g.q.viosOrange County · Apr 26, 2012#77
MY hu is complicated ass hell.... I dont really know how to adjust it i think i need a pro to do that it has all these frequency ranges that i know nothing about....

I mean 4 speakers are set to hpf and if i set it to another setting i dont like it....

my bass is ohk i Just need advice i guess on what kind of amp and what kind of speakers and where to put them and how do i run the rca's if i have all the 6 channels tied up ????
g.q.viosOrange County · Apr 26, 2012#78
Originally Posted by derickveliz2 ↑
Here are your pictures...

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
awsome .... you are awsome how did u do that...
g.q.viosOrange County · Apr 26, 2012#79
Originally Posted by derickveliz2 ↑
Also try to turn of the x-over on the amps, your HU should be able to control that, but go gentle on the volume, don't let the speaker clip.

D.
their is a full setting and a lpf setting i tried putting them on these and dont like maybe cause i dont know how to adjust the x over or turn it off... I paid a pro to adjust it and he has it set like that he charged me 30$ for like 10 min of his time and listening and tweeking the amp... I like it but i have no mids u know where their a part of a song where their s no bass just mids i dont have that....
derickveliz2Central, MA · Apr 27, 2012#80
Originally Posted by g.q.vios ↑
their is a full setting and a lpf setting i tried putting them on these and dont like maybe cause i dont know how to adjust the x over or turn it off... I paid a pro to adjust it and he has it set like that he charged me 30$ for like 10 min of his time and listening and tweeking the amp... I like it but i have no mids u know where their a part of a song where their s no bass just mids i dont have that....
give me a song...

then maybe we should go over the phone

D.
packetraceThread starterQuebec · Apr 27, 2012#81
Here is my Yaris with new wheels and tires!

Caliper have to be sanded and painted 👍

Picture not included in this copy
packetraceThread starterQuebec · Apr 27, 2012#82
Pioneer DEH-80PRS
Picture not included in this copy

Powerbass 1100.5X
Picture not included in this copy
Picture not included in this copy

Stinger Overkill
Picture not included in this copy

Stinger roller
Picture not included in this copy

MDF ring for 12'' subwoofer
Picture not included in this copy
packetraceThread starterQuebec · Apr 29, 2012#83
I really like the DEH-80PRS...but actually I think as I have read in the user manual and what I experimented with the unit..I can only set up HPF for the mids and high...and the available frequency are 63 80 100.....200 no more then that....there is certainly a way to put it to 5kHz....? anyone ?🤷🤷
packetraceThread starterQuebec · Apr 29, 2012#84
Oh fuc*!!!! i have installed them on like 15 minutes..i have not even take care of that! Will put them back correctly:)
derickveliz2Central, MA · Apr 29, 2012#85
Originally Posted by packetrace ↑
I really like the DEH-80PRS...but actually I think as I have read in the user manual and what I experimented with the unit..I can only set up HPF for the mids and high...and the available frequency are 63 80 100.....200 no more then that....there is certainly a way to put it to 5kHz....? anyone ?🤷🤷
HPF for my Lows is 63-80Hz
HPF for my Mids is 160-200Hz

that's in a 3 way, if I set up for 2 way:

HPF for MidBass would be 63-80Hz

why go 5khz ? that's too high

now if you are talking about LPF then the Midbass stops at 5kHz

D.
packetraceThread starterQuebec · Apr 29, 2012#86
Originally Posted by derickveliz2 ↑
HPF for my Lows is 63-80Hz
HPF for my Mids is 160-200Hz

that's in a 3 way, if I set up for 2 way:

HPF for MidBass would be 63-80Hz

why go 5khz ? that's too high

now if you are talking about LPF then the Midbass stops at 5kHz

D.
Sorry, I meant for the HIGh (tweeter)...

I would set up the HPF at about 4Khz...

For the Midbass...I would like to get a HPF at 100Hz and a LPF at 5kHz...

But to what I have read and experimented...I can only set up a HPF..no LPF....

The only LPF I can set is for the Low....
packetraceThread starterQuebec · Apr 29, 2012#87
Forget it...I found it !
packetraceThread starterQuebec · Apr 29, 2012#88
I just started the fiberglassing in the trunk...it is a test..it will probably fail but like Derick says...it is a learning process..

Picture not included in this copy

I putted some polyester fiber fill were the radio is...

Picture not included in this copy

a closer picture to the 6 channel RCA..

Picture not included in this copy


Today I ran power wire for the amplifier...speaker wire for the mids....amp remote...RCA wire...everything is STINGERS😁😁

I also put Stinger Overkill dampening material on the front door...

Will receive MAT en ENSolite this week....

BTW I will be in Boston for the whole week 😁
derickveliz2Central, MA · Apr 30, 2012#89
Originally Posted by packetrace ↑

BTW I will be in Boston for the whole week 😁

So what's up in Boston? I think I'll be there on Tuesday or Wednesday, you should take the IDQ with you.

D.
packetraceThread starterQuebec · Apr 30, 2012#90
I'll be there with school...so i need to follow the bus...I'll arrive on thursday 4AM...until sunday-sathurday....:(

And even if it would have been possible to see each other...I would have to take the sub with me all sathurday long...:(
derickveliz2Central, MA · May 1, 2012#91
Originally Posted by packetrace ↑
I really like the DEH-80PRS...but actually I think as I have read in the user manual and what I experimented with the unit..I can only set up HPF for the mids and high...and the available frequency are 63 80 100.....200 no more then that....there is certainly a way to put it to 5kHz....? anyone ?🤷🤷
Looking at the manual, looks you are going to be just fine!

I would set it up this way:

Sub - LPF 80Hz
Midbass - HPF 80Hz- LPF 5kHz
Tweeter - HPF 5kHz LPF Pass

Here is the LINK for the manual

Picture not included in this copy

D.
derickveliz2Central, MA · May 1, 2012#92
Originally Posted by packetrace ↑
I'll be there with school...so i need to follow the bus...I'll arrive on thursday 4AM...until sunday-sathurday....:(

And even if it would have been possible to see each other...I would have to take the sub with me all sathurday long...:(
Ok, showing off the car to a complete Bus it's not a good idea.

But let me know if some thing works for you.

D.
packetraceThread starterQuebec · May 1, 2012#93
I have printed the manual today...I will read it in the bus while we are going to Boston :D

Thank you Derick!!

I am out until sunday!!

Have a nice week guys!!


BTW I have molded the trunk for fiberglass...Ill give it more layers next week :)
talnlnkySpokane, Wa · May 3, 2012#94
why the polyfill stuffing behind the deck? Seems like that would increase the temperature of the deck, and any other electronics in that area.... Electronics don't like heat. I've got a denon deck with no internal amp that only has a 2amp fuse and it still gets hot when i play cd's.

I doubt the stuff does any amount of sound deadening if tha'ts what you are going for.
derickveliz2Central, MA · May 3, 2012#95
Originally Posted by talnlnky ↑
Electronics don't like heat.
Agree!

See that black heat radiator (heat sink) in the back of the HU, I bet is looking for fresh air.


.

Picture not included in this copy



D.
packetraceThread starterQuebec · May 6, 2012#96
I had put it to see if it does make a difference because I had already seen it on Derick's thread...

I think it changes nothing...
packetraceThread starterQuebec · May 6, 2012#97
I started tonight the deadending progress...

Picture not included in this copy

Do I put enough ?
derickveliz2Central, MA · May 6, 2012#98
Originally Posted by packetrace ↑
I had put it to see if it does make a difference because I had already seen it on Derick's thread...

I think it changes nothing...
I didn't use any polyfill over there, I did put a layer of CCFoam (for vibrations) and a heat barrier above the HU under the air ducts and above the air ducts. In summer the sun heats the dashboard pretty hard, also on top added a few peaces of foam to get rid of a rattle under the speedo cluster.

Radiant Heat Barrier:
Picture not included in this copy


D.
derickveliz2Central, MA · May 6, 2012#99
Originally Posted by packetrace ↑
I started tonight the deadending progress...

Do I put enough ?
Yeah that's more than enough, but what really is going to make a difference since you will have a sub i the trunk is to cover with a layer of MLV all the floor, wheel wells and side panels, other wise you will end up with a HUMMM from the trunk.



Picture not included in this copy


D.
derickveliz2Central, MA · May 6, 2012#100
And leave at least one drainage just in case!

And don't forget to make a chamber for the air vent, that is where most of the direct road noise gets into the cabin, you can do the following test now that your trunk is naked, lower your rear seats and drive on the high way, listen carefully while switching back and forth the air from circ to outside, you will hear the chamber open and close.

D.