Well i just ordered a short throw with a 3inch extension a little while ago looking forward to putting it in.
ordered Micro Image Short Throw
32 posts · 9,516 views
Replies 31
Just installed it, the factory clips that hold the cables to the bracket are a pain to get out, but one I got those out it was easy to install and what a difference it is, it might take me a little while to get used to it.
now what should i get from micro to do to me car.... ? :D
now what should i get from micro to do to me car.... ? :D
so how does it feel? How much shorter are the throws? Oh, and you should order everything they have. =)
^YEAH.
Getcha a nice head unit. Everyone loves getting head. Units.
Getcha a nice head unit. Everyone loves getting head. Units.
I fully understand the term "notchy" it feels more like it actually follows the pattern displayed on the shift knob. it appears to have taken a great deal of travel distance out of it I would say maybe around 45%. I only drove it up the street and back I'll have to try it out around town more. It is a trany set up so I will have to get an interior short throw, but if the micro image one did that much, an interior one added to it might make it only move half an inch between the forward and aft gear sets. that might be too much movement reduction. wait what was i talking about ....
I would like to but it's a yaris not a 18 wheeler so putting both a supercharger and a turbo would be over kill and probably pull too much boost to handle, both in control and for the engine to handle it.Originally Posted by why? ↑Oh, and you should order everything they have. =)
^ Yes, he ordered the complete kit. The brackets help relieve tension on the cables for a smoother feel. It's more notchy without it.
This kit reduces throw about 30% up and down direction, it doesn't change throw from side to side (which I think is fine like it is).
This kit reduces throw about 30% up and down direction, it doesn't change throw from side to side (which I think is fine like it is).
now for the important part, the stickers. :D they should add some extra hp along with my racing strip. :D
LOL, that is well known. There are dynos to prove it.
If stickers add HP, I think i need to go to the dyno....I might break a record!
If I remember correctly; it's approximately 100hp per sticker, and most everyone feels that two stickers is the optimally efficient allotment.
User "mr miles" may have more information.
Stickerbombing dash pieces!
User "mr miles" may have more information.
Stickerbombing dash pieces!
What is the link for the kit?
Micro Image Short Shift Kit 👍Originally Posted by Bethlehem-yaris ↑What is the link for the kit?
remember that it is a trany side kit and may take some work to get to. but worth it once it is done.
Enjoy it I want a ssk too. Now get some coilovers next.
I wasn't sure about the SSK when I did it, but after a few weeks I got used to the effort and throw distance. I can't imagine going back to stock, and I'd like to get an adjustable one for the cabin side of things.
Soo I should be getting some serious power from these then huh..Originally Posted by Spidermandud ↑If I remember correctly; it's approximately 100hp per sticker, and most everyone feels that two stickers is the optimally efficient allotment.
User "mr miles" may have more information.
Stickerbombing dash pieces!
Picture not included in this copy
is this kit hard to install? any diy's?
Yes. See my sig...Originally Posted by DeathBeard ↑is this kit hard to install? any diy's?
That's correct, whatever size driver you have should work as long as it's the right sized socket.Originally Posted by TOLMACH ↑courtesy of some king YW guys
Link to a thread or page that is not in the archive
I believe if you do not have 1/2 inch ratchet you can use a different one with required sockets ))
the hard part depends on if you get the bracket that Micro image can supply. the horseshoe clips on the OEM bracket are kind of a pain to get out, but once you get those out it only takes some time. if it was not for those clips it would have taken me less than an hour to install include removal of some parts that will be in the way.
about an hour and a half over all, i spent 45 minutes just trying to get those clip out. they are way easier going back in. if you have a dent puller(slide or slam hammer) that works great if you can get it under the edge and pop it a few times.
Are you not? I'd think you'd easily be able to outrun anything with all those.Originally Posted by EPyarisdriver ↑Soo I should be getting some serious power from these then huh..
Picture not included in this copy
now for the fun part, getting to the tranny. :D
Congrats! And 20 seconds to remove those clips? Lucky! Mine took a bit longer, as they were really stuck on there.Originally Posted by TOLMACH ↑Overall install time- 2 hours .. if I have to do it again would probably take me 30 minutes
To remove the horseshow clips just used big flat screwdriver (20 seconds to remove both)
Looks good from here... get to go out and drive it yet?Originally Posted by TOLMACH ↑if anyone can see anything wrong with my installation (pic above), pls let me know
GREAT picture showing the bracket install and orientation. Thanks for posting it.
I am so glad i put this in, I took my wife's dog to get fixed yesterday and it was nice to able to shift will the dog was laying across my arm.
any field tests yet?
i just ordered mine today 👍
does it really make a difference?
does it really make a difference?
^ Yes it does!
I purchased the 3" extender and it shifted like a mack truck. I added the short throw shifter and it now shifts like it did at the stock height but at a much more comfortable position.
I am thinking seriously about getting the in-cabin one to go along with it.
it is worth the money, hands down.
I am thinking seriously about getting the in-cabin one to go along with it.
it is worth the money, hands down.
👍 just got mine in today
i installed it however i coulent fit the washer on the top and the pin it is very tight in their i hope its okay
and would this damage anything or is it safe? because i really like the short shifts
i installed it however i coulent fit the washer on the top and the pin it is very tight in their i hope its okay
and would this damage anything or is it safe? because i really like the short shifts