Chocobo87Original postSuburbs of LA · Feb 28, 2012#1Is there any videos or instructions with pictures of people removing the Toyota emblem from the front and the back?
I want to paint them flat black and then put them back on, but I don't know if they are just on with double sided 3m tape or something else.
Thanks!
Replies 15
SineWaveSydney, Australia · Feb 28, 2012#2There's a couple of clips on the inside as well as the double sided tape. Remove the trim from the back door/hatch to get access.
12 yarisYork,Pa · Feb 28, 2012#3Before you paint them you must sand and prep them,so the paint adheres to the emblems.
WeeYariGeorgetown, Ontario, Canada · Feb 28, 2012#4 Originally Posted by
SineWave ↑ There's a couple of clips on the inside as well as the double sided tape. Remove the trim from the back door/hatch to get access.
They changed the way they are mounted for the Gen3 model?
Prior years, the front emblem is four clips only. No tape. The rear emblem is tape only. No clips.
Chocobo87Thread starterSuburbs of LA · Feb 28, 2012#5Cool thanks for the tips! Keep them coming!
I will check it out later ^_^
CPALK719Hollywood, Florida · Feb 28, 2012#6there is new method that a friend of mine told me about, its called plasti dip. he just recently tryed it on his IS250 and loved the results. after spraying on you can just easily peel off the excess paint with no problem. i might be trying that myself soon.
libre hommeMalaysia (melaka) · Sep 26, 2012#7nice tips
FidelioLos Angeles, CA · Sep 26, 2012#8also isopropyl alcohol is a great solution for cleaning the surface and emblem....
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Sep 28, 2012#9 Originally Posted by
CPALK719 ↑ there is new method that a friend of mine told me about, its called plasti dip. he just recently tryed it on his IS250 and loved the results. after spraying on you can just easily peel off the excess paint with no problem. i might be trying that myself soon.
A member from Corpus Christi,Texas just did his rims in a sort of orange color. Another member in the U.K did his in black. Search plastidip and plasti dip with the search fuction. One of these hits includes a link to a YouTube video about the sublect with many similar videos listed on the right once you are onto that YouTube page. i'm sure your friend will clue you in re how to do it (if he hasn't already), but these other posts and venues will give you an idea what different aftermarket wheels look like with different dip color combinations and different car colors.
ShroomsterOrlando · Sep 28, 2012#10 Originally Posted by
WeeYari ↑ They changed the way they are mounted for the Gen3 model?
Prior years, the front emblem is four clips only. No tape. The rear emblem is tape only. No clips.
The front emblem is deeper now and clips are a little different but it is still 4 clips on back
jpmck03USA · Sep 29, 2012#11Check the last two links on my signature... some good pointers in there! 👍
ShroomsterOrlando · Sep 29, 2012#12Plus on the 2012 there is an extra piece of impact abs between the radiator and the front bumper at the top where the emblem is....
jeeper5usaEdison, NJ · Sep 29, 2012#13On my 2011 does the rear emblem have clips or no? What is easiest way to remove? Just pry it off?
I can see this is not going to go well.
jpmck03USA · Sep 30, 2012#14Everybody!
Search is your friend.
DIY: Debadge/Black out Emblems A quick synopsis:
2006-2011:Front: 4 plastic tabs hold it the the bumper
Back: 3M body tape holds it on and there are two alignment pegs
2012+:Front: 4 slightly different plastic tabs hold it the the bumper
Back: 3M body tape holds it on and there are two alignment pegs
treelowaBasingstoke, UK · Nov 9, 2012#15Use plastidip, don't even have to take them off the car :)
imike929San Diego · Nov 9, 2012#16 Originally Posted by
Chocobo87 ↑ Cool thanks for the tips! Keep them coming!
I will check it out later ^_^
Post some pics when you're done! There is a lot of talk of mods for 2012 but not too many pics. Thanks buddy 🙇