kouOriginal postnj · Feb 23, 2012#1Finaly going turbo after years of thinking about it. This will be a slow project may take a couple of month's to finish. Got my Zage turbo kit, AEM Fic and boomslang pnp harness coming in the mail next week.
Still have a bunch of other things to get so wish me luck😁
Replies 60
cali yarisCanoga Park, CA · Feb 23, 2012#2Good luck and I think I speak for everyone that we are all here to help!
kouThread starternj · Feb 23, 2012#3Thanks, its been a long time since I have been on YW. I will be posting lots of pics as the build gets moving.
ROCKLAND TOYOTAROCKLAND COUNTY NY · Feb 23, 2012#4NICE, glad to see your still around....
kouThread starternj · Feb 23, 2012#5Thanks Rockland. Yeah its been a busy year for me i got married, moved and got a new job. Hope to have this thing finished before the show season.
kouThread starternj · Feb 23, 2012#6My First question of maybe many. I want to put an adjustable fuel regulator and a new rail if i can find? I know the stock regulator is in the tank and i,m not sure if i have to remove that one? And if i do have to remove it do i have to modify anything when its removed?
kouThread starternj · Feb 23, 2012#7cali yarisCanoga Park, CA · Feb 23, 2012#8We will have fuel rails for the Yaris available in about 2 months. They will allow for a return line as well. Made in the USA. 👍
kouThread starternj · Feb 23, 2012#9 Originally Posted by
cali yaris ↑ We will have fuel rails for the Yaris available in about 2 months. They will allow for a return line as well. Made in the USA. 👍
Nice to here that.
fnkngrvIn The Hotbox · Feb 24, 2012#10 Originally Posted by
cali yaris ↑ We will have fuel rails for the Yaris available in about 2 months. They will allow for a return line as well. Made in the USA. 👍
Once again that "Like" button sure would be nice 👍
ROCKLAND TOYOTAROCKLAND COUNTY NY · Mar 9, 2012#11KOU
do you know of a muffler shop in ny or nj that could take on the task of welding in a new section of my mid pipe???
pimp my yarischicago · Mar 9, 2012#12Good luck
kouThread starternj · Mar 25, 2013#13My project is still going on after a year of collecting parts. Some pictures of whats done so far, got some gauges installed my exhaust is done my fuel rail is in, zage oilpan on, working on my downpipe. This week if it warms up I hope to run a new fuel feed line.
6 attachments not included in this copy
cali yarisCanoga Park, CA · Mar 25, 2013#14Looking great, I like your steering wheel. :D
You're going to have so much fun driving that beast....
GolddeenohColumbia, SC · Mar 25, 2013#15I like that valve cover, keep it up. :D
JerkrattFair Lawn, NJ · May 6, 2013#16cant wait to see it in person
kouThread starternj · May 7, 2013#17^^ Still doing a little tuning to clean up transition into boost and I have to order some silicone connectors to neaten up my ic piping. But i'm around I would like to see your setup also.
JerkrattFair Lawn, NJ · May 7, 2013#18Hmu man I'm always going to meets
kouThread starternj · May 7, 2013#19^^Where/when are these meets?
JerkrattFair Lawn, NJ · May 7, 2013#20Tonight might be kinda far but it's in Hazlet. usually Mondays white castle rt 17 9pm-?? Ect Ect Friend me on fb
www.facebook.com/james roimisher and I'll send you invites to them... There not shows just Meets
Focus_Sh1ftNew Jersey · May 8, 2013#21Let me know when you guys are getting together, I'm only an hour out from the Fair Lawn area. 👍
kouThread starternj · May 9, 2013#22^^ sounds good as soon as i can get rid of this bog at around 2400rpm. I think I am closer to you I live in Montclair. I would like to check out that TC you have.
Focus_Sh1ftNew Jersey · May 9, 2013#23Cool, Montclair is only like 40 minutes away. As much as I love my Yaris, my tC is definitely the more impressive car. 😆
Good luck with the bogging. Did you change out your plugs for a colder set with a smaller gap? Also, don't put a '0' in any cell on the fuel map for the FIC (unless you changed the injector rate as per CTScott, which I believe fixes that).
kouThread starternj · May 9, 2013#24I have colder plugs in and i have some 0's in the cels before boost my injector rate is 810
Focus_Sh1ftNew Jersey · May 9, 2013#25If you didn't change the injector rate, just change those cells to .8. Guarantee it will solve your problem.
kouThread starternj · May 9, 2013#26all cels that are .0. change to .8.? my injectors are set to 810us
Focus_Sh1ftNew Jersey · May 9, 2013#27Ah, I think you changed the injector rate. I had the same problem with the default injector rate (I think its 510 us), but hey, it's still worth a shot. Yes, try changing all 0 to .8
kouThread starternj · May 9, 2013#28i will thanks. i think it might be my maf clamp not sure though. i am going to try something i found on a scion forum to see if it helps, maf to percentage set clamp in the settings then zero out all cells, we will see if this works.
Focus_Sh1ftNew Jersey · May 9, 2013#29If it's any consolation, I have my maf table set to percentage, so hopefully that'll be the problem. Good luck!
kouThread starternj · May 9, 2013#30yeah i just followed the aem videos. car in boost is good but it stumbles just before.
yariSB86OH · May 9, 2013#31Kou, not jacking your thread, just have similar tuning questions.
I'm
still having a hard time getting my car to idle like stock. Things that are different are only the spark plugs and the fuel injectors. What are you guys doing to get it to idle smooth?
kouThread starternj · May 9, 2013#32I am still using stock injectors. I may switch but haven't seen a need yet at low boost,i will when i start turning up boost. Did you tune it with stock injectors? Did you try upping the injector response time a little +100 at a time? I just got my car driving really nice🍻 My MAF clamp was my problem.
yariSB86OH · May 9, 2013#33i have my IRT set to 810, AFR runs 13-15 at warm idle. i havent set up a MAF clamp yet as im not sure how to.
kouThread starternj · May 9, 2013#34^^ go into setup and in the maf section chose percentage and set the max clamp voltage to 4.1 volts and leave you maf table all 0's that worked for my maf clamp. you may have to up the IRT for a better idle from what I have seen online but I am not positive.
JerkrattFair Lawn, NJ · May 9, 2013#35Kouts I'm gonna call you.. If i still have your number
yariSB86OH · May 9, 2013#36@kou - If you left your MAF map all 0s, what did you do with your Fuel map?
JerkrattFair Lawn, NJ · May 9, 2013#37You got a lap top i got my fic lol you can looms at my setup.. But I'm sc
kouThread starternj · Sep 27, 2014#38Its been a while since I have been on. The Yaris is still alive and well but I am getting bored and need more power. So I had to do some shopping. Built bottom end CP pistons and Molnar rods, rebuilt a stock head, got a -10 fitting welded to my upper pan for an oil return I bought a full engine gasket kit new chain guides a chain and tensioner new head bolts and a bunch of other misc bolts and parts. I have also ordered a TRD LSD a new clutch. Hope to have it all put together over the next month.
4 attachments not included in this copy
fnkngrvIn The Hotbox · Sep 27, 2014#39forgot....did you uprgade your TB yet?
kouThread starternj · Sep 27, 2014#40Yes I am running the corolla TB with a ported factory manifold.
Ryze268Antigua & Barbuda · Sep 27, 2014#41 Originally Posted by
kou ↑ Yes I am running the corolla TB with a ported factory manifold.
pics?
kouThread starternj · Sep 27, 2014#42FreestylinCalgary, Alberta · Sep 28, 2014#43How much boost are you planning to run? Can't wait to see this project finished. :)
kouThread starternj · Sep 28, 2014#44 Originally Posted by
Freestylin ↑ How much boost are you planning to run? Can't wait to see this project finished. :)
Not sure on the boost number but I would like to have somewhere around. 250whp.
cali yarisCanoga Park, CA · Sep 28, 2014#45That will take approximately 15-16 psi. Are you doing head work?
kouThread starternj · Sep 29, 2014#46 Originally Posted by
cali yaris ↑ That will take approximately 15-16 psi. Are you doing head work?
No head work at this time just had a factory head rebuilt with new valve seals and one new valve.
kouThread starternj · Oct 17, 2014#47Nearly time for motor swap and LSD install.
2 attachments not included in this copy
kouThread starternj · Nov 29, 2014#48Just installed my new built motor,TRD lsd and new clutch. Will post some pictures later. Still have a couple of hundred miles for the clutch breakin.
LTHatchNewark NJ · Nov 29, 2014#49Can't wait to see the new motor in the car, nicely done!
kouThread starternj · Dec 2, 2014#50Some of these shots are crappy don't know what happened. whole job took about 8hrs that included lsd install which I did the way some people would say is wrong but it seems to be fine.
6 attachments not included in this copy