Yarisworld Archive

Projector HID Retrofit:

86 posts · 20,786 views · page 2 of 2

Replies continued

SAV912Thread starterSavannah, GA · Jan 11, 2012#51
Originally Posted by Brian ↑
No. The reflector bowl should have no effect on the light if using a projector. The projector should control all of the light output by itself. If the light coming out of the projector is hitting the reflector bowl then the projector may need to be moved out more to allow it to do its job.
And since there's not really a way to do that with the base of the projector barely getting through the hole, the alternative that people do is paint the reflectors in order to cancel out the light being thrown all over the place.

I'm guessing it's really bad on the right projector because the kick up is to the left instead of to the right like it should be, while also reflecting off that side of the bowl and getting thrown back to the right. Hence my problem with the ground directly in front of the car to the right being lit.
yaris2010RSAngus, Ontario · Jan 11, 2012#52
the halo "connector" or "dead spot" on both of mine are off by ~20 degree.

and i believe this calls for a i told u so? lol, jksjks.

as for your concern with the speed sign being lit further away then the stop sign, the stop sign is higher and closer to u then the speed sign, if ur cut off is at hood level things dirrectly infront of u will no be illuminated if higher then ur hood, the further out u go the more light bleeding u get and the more the slight angle of ur car will be amplified per mesurement of distance away. the light that bleeds up at that distance will not be blinding for other drivers.
thebarberGrand Rapids, MI · Jan 11, 2012#53
Originally Posted by SAV912 ↑
Picture not included in this copy
to me, it looks like both of your projectors need to be rotated clockwise a bit....which should sort out your rhd lookalike setup

here are how mine look

Picture not included in this copy

Picture not included in this copy

here is the cutoff on mine...

Picture not included in this copy
Kaotic LazagnaCentral Valley, CA · Jan 11, 2012#54
Originally Posted by Brian ↑
No. The reflector bowl should have no effect on the light if using a projector. The projector should control all of the light output by itself. If the light coming out of the projector is hitting the reflector bowl then the projector may need to be moved out more to allow it to do its job.
LOL, I know that. I was just saying that if the light from the projector was hitting the reflector bowl, shouldn't it throw the light back to the regular orientation as stock?
SAV912Thread starterSavannah, GA · Jan 11, 2012#55
Originally Posted by thebarber ↑
to me, it looks like both of your projectors need to be rotated clockwise a bit....which should sort out your rhd lookalike setup

here are how mine look
Ah, okay. Good to have a reference point. When I get some time, I'll try to tear into them again.
cali yarisCanoga Park, CA · Jan 11, 2012#56
The manufacturers stopped including sealant last year as they were getting hassled by customs
I get sealant included with mine.... must be a Canada thing?
thebarberGrand Rapids, MI · Jan 12, 2012#57
Originally Posted by cali yaris ↑
I get sealant included with mine.... must be a Canada thing?
Might be the company.... I know my friend in Ottawa got a shipment sent back due to the sealant...
SAV912Thread starterSavannah, GA · Jan 19, 2012#58
After 10 days in a row of working nights (gotta love pharmacy life and how many 'sick' people there are) I finally got some time after I got off work tonight to crack into these again and do some digging around.

My poor car all one-eye'd again. I'm sure he thought this poking him in the eyes thing was finally done with. lol

Picture not included in this copy

Took a projector out and this is the view through it.

Picture not included in this copy

Remember, that everything you see in a projector is mirrored and upside down. With that in mind, the cutoff is correct and these are indeed LHD projectors. I shined a flashlight through it and pointed it at a wall with the 'top' marker as straight as possible and this was the result:

Picture not included in this copy

As you can see, the cut off is correct and kicks up to the right. So, not only did I install them incorrectly, I did so in such a perfect manner as to mimick RHD projectors. Essentially, the proper beam to be facing straight horizontal was kicking up to the left and the part that should kick up to the right was straight across. I guess this is me eating my crow, and my apologies to Garm/MI. I feel a little sheepish. lol

I'm still hesitant to paint the reflector bowls, mostly because now it is too cold to be painting (tonight, at least...it's about 35F out at the moment). I had to brew an idea up to see if I could get around the reflection of the light bouncing around in the bowl of the projector until it warms up enough to paint. Here is my solution for now:

Picture not included in this copy

It's not perfect, but I may just paint the tape itself and see how that goes before I go painting the whole thing. One other thing I noted is that it's been almost two weeks here on the Georgia beach with two nights of rain passing by. My lights have not been sealed this entire time. It's not exactly 0% humidity around here either and at no point has condensation found its way into the inside of my lights. I thought that was astounding. I still intend to seal them after I get everything lined up as close to perfect as I can, but is sealing the lights back up overrated or did I just happen to get lucky on that aspect? 😁

Now to get back down into the garage and finish putting together light #1.

-C
thebarberGrand Rapids, MI · Jan 19, 2012#59
paint the bowl or you'll get light reflecting off the long side...
SAV912Thread starterSavannah, GA · Jan 19, 2012#60
This was the remainder of my work from last night. I went a little too far the other way and now the horizontal line is a little tilted but it's easier to adjust it now. Here is the new position on the right side:

Picture not included in this copy

This is with the bowl just taped up, and not yet painted.

Picture not included in this copy

Picture not included in this copy

As you can see, much less light is being wasted by bouncing around inside the bowl as it leaves the projector. Perhaps this tip of painting the bowls could be added to the how-tos.

Picture not included in this copy

This is the culprit for my initial 'RHD' looking cutoffs. Notice the locking washer has a tab that is suppose to line up with the indentation on the projector itself. I lined these up in order to squeeze enough threads through the hole and crank down on the nut. The fact of the matter is, when you line the slot and tab up, the result is the different cut off since the projector will sit in the bowl slightly crooked by about 15 degrees. Unfortunately, if you do not line the tab and slot up, you can't push enough threads through and get the tightening nut securely on. My solution was to ditch the locking washer and just use the tightening nut to keep things secure. As a result, there are now plenty of threads to crank down and secure the projector in the bowl without much frustration.

I'm about to start painting before it gets too cold again, and then will work on the second light.

-C
SAV912Thread starterSavannah, GA · Jan 20, 2012#61
HOLY. CRAP.

Picture not included in this copy

Picture not included in this copy

It's an entirely different LEAGUE of brightness!! I can see for what feels like MILES!! Decided against paint tonight since it never got out of the low 50s today and it had been cloudy all afternoon and threatening rain. I did get the second bowl taped up, and have the projectors in perfectly horizontal and with cutoffs in their proper locations. Also aimed them vertically and it is just incredible how much light was being wasted bouncing around in the reflectors and shooting up into the air with the incorrect cutoffs. THIS was the kind of light on the road I was hoping for at the beginning of this project.

Garm, don't worry about any refunds. I will definitely be keeping these now. 😁

Yay MicroImage!!
thebarberGrand Rapids, MI · Jan 20, 2012#62
You can totally see in your pics where the.light will bounce.off the buckets if you don't paint them....the yaris is a super deep headlight..
SAV912Thread starterSavannah, GA · Jan 20, 2012#63
Originally Posted by thebarber ↑
You can totally see in your pics where the.light will bounce.off the buckets if you don't paint them....the yaris is a super deep headlight..
They will be painted when the conditions allow. It's been very rainy and humid here lately. When it hasn't been raining, it's been too cold. Months and months of not-at-all-like-winter conditions and then I finally start to do stuff and it gets too cold.

But yes, painting the bowls is almost mandatory. Did you end up painting yours?

-C
yaris2010RSAngus, Ontario · Jan 24, 2012#64
i painted mine when it was about 0 out. no issues, i also used a heat gun to bake the paint and was dry within 30 mins and ready for install
DadamsCypress, Tx · Jan 24, 2012#65
Looks great glad you could figure it out! You should definitely paint them when you can
SAV912Thread starterSavannah, GA · Jan 24, 2012#66
I'm gonna see if I can try the heat gun method of baking the paint. I have a good heat gun. Then I'll get 'em sealed.

Hopefully sometime this weekend, I can get full high-res shots. Maybe even send some to Garm as sample photos that he can use on the MI page.

-C
bzinn 1University Place,WA · Jan 24, 2012#67
I have to do a lot of painting and airbrush work on some of the art I restore and basically to get paint to stick right and dry right in winter and rain....I live in Seattle area....lol....

What I do is make sure the item I need to paint has been inside the house for a few days and climatized and warm and dry.

I paint usually on my patio and then take the item inside to dry. Use light coats and multiple coats....in summer I lay paint much thicker than in winter.

Make sure as always the item you are painting has been scuffed,and cleaned,and tacked.

Love all the pictures you have been posting.You were so frustrated when you began and now you are actaully beating all the troubles and helping others by showing us where your having issues....thanks man.
DadamsCypress, Tx · Jan 24, 2012#68
agreed!!
SAV912Thread starterSavannah, GA · Feb 4, 2012#69
BAM. All done. Painted, legal, and thoroughly awesome.

Picture not included in this copy

The ONLY quibble I still have is maybe going 5K instead of 6K. It's a touch too blue at times for my case, such as in the rain at night. Which it seems to do often here lately. Otherwise, I'm happy I stuck with them and worked out all the kinks. I was a gnat's whisker from taking Garm up on returning them.

For any potential retrofitters, use the how-tos that have been posted. Do some research on the MI Forums as well, and write down all the details you can because they may not be all in one how-to. If it can be done, I want to change the title of this thread to better suit those who are searching the forums by thread, and to benefit the community. The product Garm sells doesn't suck at all. The idiot installing them sucked on the first go round. 😁

-C 🍻
yaris2010RSAngus, Ontario · Feb 4, 2012#70
nice final write up, glad u got thru it all, they look great
SAV912Thread starterSavannah, GA · Feb 4, 2012#71
Originally Posted by yaris2010RS ↑
nice final write up, glad u got thru it all, they look great
Thanks. 😁

And also, thanks for essentially telling me to quit being a pussy and to get these together. I was so over it after that first night when I started the thread. lol 👍

-C
yaris2010RSAngus, Ontario · Feb 4, 2012#72
lol well i didnt wanna say it...but since u said it first :D
SpidermandudJohnson City, Tennessee · Feb 4, 2012#73
That's tight man; I feel like I go from thread to thread going "I want that. And that. And that. . .. and that... .. ... . and that.. . .......... and that.. .........." :D
SAV912Thread starterSavannah, GA · Feb 4, 2012#74
Originally Posted by Spidermandud ↑
That's tight man; I feel like I go from thread to thread going "I want that. And that. And that. . .. and that... .. ... . and that.. . .......... and that.. .........." :D
That's how it starts. Every time.

Picture not included in this copy

-C
boggydeeCalgary · Jun 18, 2012#75
Hello! I got my light the same one above^ from MI couple months back and I finally have some days off to do this diy. Can anyone please help me with the wiring? If anyone can show me point to point where to connect the wires that would be great! I also wiuld like the halo as run as my daylight running since it requires it in my province...And anyone else have any idea how and where to attach the multicollor back leds?
SAV912Thread starterSavannah, GA · Jun 18, 2012#76
We don't yet require daytime running headlights in the US. I would get with CTScott. The only reservation I would have as far as running the halo as the DRL would be that the DRL module puts out too many volts/watts (whichever the correct term is) to power just the LED ring. My halos are tapped into the parking lights (the little 194 wedge in the headlamp cluster) and the DRL module powers the full headlight at a reduced intensity. Running the HIDs themselves with the DRL module plugged in will lead to problems for the same reason. The HIDs don't take kindly to pulsated power (reduced from full intensity as they are with halogens) and would flicker, or not illuminate at all and that could result in prematurely failing ballasts.

As for wiring, the long red positive wire with the short negative wire (it is significantly longer than the other one) is for the passenger side headlight since it is further away from the battery. These mount on the positive battery post. The short one, obviously goes to the driver's side. The negative terminals (short black wires with the circular metal tab) are your grounds, and those need to be bolted to the bare chassis of the vehicle. I mounted both of mine on the strut towers.

The rest of the wires for the ballasts and the wires that come out of the back of the projectors can only be mounted one way. Remember to plug the headlight from the old halogens into the mating connector on the new set. As far as the LED multicolor backlight rings, I didn't bother with those because that was more wiring that I didn't care to sort through in the dead of winter and I find them rather cheesy and unnecessary anyway. Mounting and wiring those is up to you but I wouldn't know how to help you there.

Good luck.

-C
boggydeeCalgary · Jun 19, 2012#77
Would you hppen to have some pictures of the wiring of your car? Im kind of lost... Sorry but Im really new to this.... Please help
my2senseVancouver, BC · Jun 21, 2012#78
Originally Posted by boggydee ↑
I also wiuld like the halo as run as my daylight running since it requires it in my province...
Hey Boggydee, the halos won't be bright enough to use as DRL. I know since that was my original plan too. I had to rewire the DRL to the fog lights as DRL and use a relay to turn off the fogs when the HID headlights come on similar to the default DRL actions.

Although the wiring looks complicated, it's actually the easiest part of the install. SAV912 pretty much laid it out for you in his last post. Read it again and label it against each connections and you should be fine.

Good luck
07liftbackBay Area · Feb 12, 2013#79
Hey, sorry to bring this thread back from the dead but I was wondering if you had any more pics of the completed retrofit on your car. I was planning on blacking out the headlights also!! I've seen another liftback with a retrofit in the original chrome headlight housing and I must say, it looked rather funky from the front. That's why I had planned to black out the housing the same way you did!!
cali yarisCanoga Park, CA · Feb 12, 2013#80
I actually still have a few of these in stock. Not going to complain about the thread necro. 😁
ilikericesavannah, ga · Feb 12, 2013#81
Hey, its funny how this thread just popped up again. I actually bought these from SAV912 a few weeks ago and just swapped headlights.

Got a small issue. Been raining pretty consistant past 2 days. This morning it was still raining and of course I ran thru a pretty big puddle which got water in the right side of my engine bay. I didn't notice this at first until a mile before I got to work and could see the reflection of my headlights in the bumper in front of me and noticed my right headlight is out. They Halo still works, just not the headlight.

I haven't tried to diag this yet. I was gonna do this when I got home. I checked under the hood when I parked and noticed the ballast was a little wet. but not soaked. Haven't check the fuse yet, that is still a possiblility. I plan to go home and just swap the left and right. If not that, maybe the bulbs, I will just be doing swapping trial and error and then some voltage checks.

Worse Case, is it possible to just purchase one Ballast if it is the known issue? I guess this is more directed to Garm.

I will try to take some pictures if you would like, 07liftback. Let me know any prefered pictures that are not taken already
thebarberGrand Rapids, MI · Feb 12, 2013#82
Check that the relay is right side up....I had one fill up with water one time...
cali yarisCanoga Park, CA · Feb 12, 2013#83
yes, I stock separate parts now, no problem at all.
ilikericesavannah, ga · Feb 13, 2013#84
saweet, thanks guys

Still raining like crazy here. So yea. hopefully it will stop today
ilikericesavannah, ga · Feb 14, 2013#85
Bad ground. Need to find a better location for my stuff on the right hand side.
yaris2010RSAngus, Ontario · Feb 14, 2013#86
cuz the furthest right front corner valve cover bolt is too far? lol.

also try the engine mount bolts