Yarisworld Archive

13mm Penguin Garage Rear Hub Spacers Installed!

21 posts · 9,305 views

Jackalope1Original postSouth FL · Dec 3, 2011#1
So I bought these a couple weeks ago and was waiting for a friend to come help me install them. Well I grew impatient and decided to give it a go myself. I am by no means a mechanic but I found these fairly simple to install.

I used this link and everything went smooth (thanks Tamago for a very simple DIY)
http://http://www.yarisworld.com/for...ad.php?t=18092

Anyways the finished product is very aesthetically pleasing and I am glad I purchased these. This car should have came this way from the factory. 👍

I also threw in some chrome turn signal bulbs cause I can't stand that amber...

Enjoy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Replies 20

MadMaxSan Antonio, Texas! · Dec 3, 2011#2
Your Yaris is looking really sharp!

But ya gotta toss a tip on that weedy exhaust pipe! Even the twelve dollar ones from Walmart look pretty good!

Picture not included in this copy

Cheers! M2
1nastyvitzGuam · Dec 4, 2011#3
Nice....... I like the one sitting in the GARAGE. I see what you mean when you said your other ride is a NECK BREAKER.... Thanks for the THREAD now i can see how my ride is gonna look.

Nice Ride man.....

Kaotic LazagnaCentral Valley, CA · Dec 4, 2011#4
Nice. What are the specs on your rims/tires?
Jackalope1Thread starterSouth FL · Dec 4, 2011#5
I'm not to sure what the specs on the rims are other than their 16in BBS's and the tires are 205/45/16. I also have a 1.9in drop f/r
Kaotic LazagnaCentral Valley, CA · Dec 5, 2011#6
Originally Posted by Jackalope1 ↑
I'm not to sure what the specs on the rims are other than their 16in BBS's and the tires are 205/45/16. I also have a 1.9in drop f/r
Oh what!? I thought they were 17's. lol

So, you're dropped on Tein S.Tech springs, eh? Me too. hahaha
Jackalope1Thread starterSouth FL · Dec 5, 2011#7
Yeah lol

Oh and btw I think you have one of the cleanist sedans around. I was actually never really a fan of the four door but yours made me think differently 🎉
Kaotic LazagnaCentral Valley, CA · Dec 5, 2011#8
Originally Posted by Jackalope1 ↑
Yeah lol

Oh and btw I think you have one of the cleanist sedans around. I was actually never really a fan of the four door but yours made me think differently 🎉
Thanks! 👍

Keep up with the nice, clean, simple mods; that's the way to go imo.
jeromechicago · Dec 24, 2011#9
It looks like you have a little negative camber in the rears? It looks good. Was that intentional or did that happen with the drop? Or the hub spacers? Or both?
Kaotic LazagnaCentral Valley, CA · Dec 26, 2011#10
^ some negative camber results from lowering the car. Additional negative camber can be had with shims.
ljming99Singapore · Dec 26, 2011#11
What is the offset for those rims? im guessing +42 perhaps?
MUSKOKA800Chatham, Ontario, Canada · Dec 29, 2011#12
Looks great Jack!
Any rubbing when loaded up?
cali yarisCanoga Park, CA · Dec 29, 2011#13
^ some negative camber results from lowering the car. Additional negative camber can be had with shims.
NOT in the rear!
BluYrsTallinn, Estonia · Dec 30, 2011#15
MAN that looks good. Even the otherwise huge rear wing works with those wheels and the drop. Loving the subtlety of the setup.
Kaotic LazagnaCentral Valley, CA · Dec 30, 2011#16
Originally Posted by cali yaris ↑
NOT in the rear!
Really, the rear doesn't get affected? Seems like I got slightly more negative camber and toe-in (visual and alignment sheet) 🙁

Don't tell me that both of those were caused by the repaving of I-80. 🙁
catliektheifLeesburg, VA · Mar 28, 2012#17
the diy link didnt work for me..

also do you have to get an alignment after installing them?
Kaotic LazagnaCentral Valley, CA · Mar 28, 2012#18
Originally Posted by catliektheif ↑
the diy link didnt work for me..

also do you have to get an alignment after installing them?
Talking about the spacer? I don't think you would need to get an alignment done since they don't really do anything other than push out the wheels/widen the track.
Jackalope1Thread starterSouth FL · Mar 28, 2012#20
Originally Posted by MUSKOKA800 ↑
Looks great Jack!
Any rubbing when loaded up?
It only rubs when I go over speed bumps when there's a heavy passenger in the back, but other than that it rides great

Originally Posted by BluYrs ↑
MAN that looks good. Even the otherwise huge rear wing works with those wheels and the drop. Loving the subtlety of the setup.
Thanks!

Originally Posted by catliektheif ↑
the diy link didnt work for me..

also do you have to get an alignment after installing them?
Nope
catliektheifLeesburg, VA · Mar 29, 2012#21
awesome! thanks.