ShinareOriginal postOklahoma City, OK · Oct 12, 2011#1Hey all,
I reciently purchased a set (havn't arrived yet) of NF210's and was wondering if this thread:
TANABE DF210 Spring Install [pics] Was still the end-all be-all installation instructions for them or if there was something better/easier out there?
Can't wait to install them. Only thing left on my short list is a rear sway bar!
Replies 9
Klink10910 · Oct 12, 2011#2Yea those were what I followed along with the service manual stickied on this site and the instructions provided. Don't forget correct tools and stands. Want to see pics when you are done and not ones of you crushed under the car.
ShinareThread starterOklahoma City, OK · Oct 14, 2011#3One question about the struts. In the instructions theres a hex/allen wrench in the bolt and then a wrench around the nut. Is it necessary to have this hex/allen wrench in there? I ask because I have an pnumatic impact wrench and was wondering if I can just use that on the nut to take it off without the hex/allen wrench in there. Why is that there?
thebarberGrand Rapids, MI · Oct 14, 2011#4you shouldnt need the hex with an impact wrench...ive never needed it
depending on how many winters your yaris has seen, i would spray all bolts/nuts you intend to loosen with liquid wrench at least 24h before installation of the springs...
cali yarisCanoga Park, CA · Oct 14, 2011#5The hex works if you are using a 17mm offset wrench with it -- in other words, NOT using power tools, OR if you just don't want to remove and replace all the cowling.
ShinareThread starterOklahoma City, OK · Oct 14, 2011#6 Originally Posted by
cali yaris ↑ ... OR if you just don't want to remove and replace all the cowling.
Can the fronts be done without taking off all the windshield wiper stuff and cowling?
cali yarisCanoga Park, CA · Oct 14, 2011#7yeah that was kind of my point. 🙂
WeeYariGeorgetown, Ontario, Canada · Oct 14, 2011#8 Originally Posted by
Shinare ↑ Can the fronts be done without taking off all the windshield wiper stuff and cowling?
IMO - taking off the cowling and going at the nuts with an impact is way easier than leaving the cowling in place and using offset and hex wrenches.
EDIT: when you do get the job done, please don't come back at us with a 'What is this gap?' thread 😉
ShinareThread starterOklahoma City, OK · Oct 15, 2011#9LOL I remember that thread, I even went outside and took a pic of my yaris to help show its normal. hehe
BTW: My springs came in!! woot! My daughter is back from school this weekend and I will be out of town next weekend. :( I'm going to be sitting on these for two weeks. *sigh*
Betriventedmonton · Oct 15, 2011#10It'll be all them ore sweet when you put it in! *snicker*