BetriventOriginal postedmonton · Jun 27, 2011#1Bought it off eBay. This is the link I bought it from:
http://cgi.ebay.com/ebaymotors/ws/eB...T#ht_500wt_956 only issue is that the wheel will sit crooked. The sl9otsin the locking ring don't line up properly with the Scion wheel I got. The stock yaris wheel has a ridge in the metal part that sits on top of two ridges in the locking right, whereas the Scion wheel does not have these ridges, and therefore mus sit crooked in the other slots in the locking ring. A bit irksome.. but it's leather!
1 attachment not included in this copy
Replies 17
CTScottUSA, CT · Jun 27, 2011#2I have a TC one on Crashy. To make it not sit crooked, you rotate the clockspring by the width of that tab.
BetriventThread starteredmonton · Jun 27, 2011#3doesn't that make your signal on one side shorter than the other?
CTScottUSA, CT · Jun 27, 2011#4 Originally Posted by
Betrivent ↑ doesn't that make your signal on one side shorter than the other?
The signal cancel difference is really not even noticeable with how little you have to shift it.
BetriventThread starteredmonton · Jun 27, 2011#5Awesome
Ill give it a shot in a bit when I have time!
BetriventThread starteredmonton · Jun 27, 2011#6Hey CT, I shifted the locking ring to the left and now my wheel is straight BUT! for some reason it clicks excessively when I turn?
CTScottUSA, CT · Jun 27, 2011#7 Originally Posted by
Betrivent ↑ Hey CT, I shifted the locking ring to the left and now my wheel is straight BUT! for some reason it clicks excessively when I turn?
Very strange. No clicking with mine.
BetriventThread starteredmonton · Jun 27, 2011#8It sounds very.. patterned. They're not random. I hear two clicks when I reach a certain point, and then two clicks again when I pass back around the other way. The signals and everything work fine, but this annoying me. As far as I know I haven't rotated the clock spring a full cycle around accidentally so it's not like it could be off.. Maybe I'm crazy but, does your normal yaris click when you turn? More than just the once when the signal passes the point of return?
CTScottUSA, CT · Jun 27, 2011#9 Originally Posted by
Betrivent ↑ It sounds very.. patterned. They're not random. I hear two clicks when I reach a certain point, and then two clicks again when I pass back around the other way. The signals and everything work fine, but this annoying me. As far as I know I haven't rotated the clock spring a full cycle around accidentally so it's not like it could be off.. Maybe I'm crazy but, does your normal yaris click when you turn? More than just the once when the signal passes the point of return?
No. Neither clicks. Are you sure that it's not your airbag screws making the clicking sound (provided that you haven't remounted the airbag yet)?
BetriventThread starteredmonton · Jun 27, 2011#10Everything is on tight and proper
CTScottUSA, CT · Jun 27, 2011#11I just pulled mine back off to take another look. If you look at the round part that inserts into the center of the clockspring, the continual diameter of the TC one is equal to the widest width of the Yaris one. I wonder if the extra material is sitting wrong on yours to where it is pushing against some of the fins on the inner surface of the clockspring and hence deforming the clockspring case enough to cause the clicking?
BetriventThread starteredmonton · Jun 27, 2011#12It may be that you're right and it's not seated right. When I get back to my car in a bit I'm going to go e it another reseat. Which way did you orient your clocksprong? More clockwise or counter?
CTScottUSA, CT · Jun 27, 2011#13The Clockspring connector is to the right of center.
BetriventThread starteredmonton · Jun 27, 2011#14^ Which incidentally fixed my problem. I set it clockwise form center. Magically fixed itself.
PROX4x4CO · Jul 21, 2011#15 Originally Posted by
Betrivent ↑ Bought it off eBay. This is the link I bought it from:
http://cgi.ebay.com/ebaymotors/ws/eB...T#ht_500wt_956 only issue is that the wheel will sit crooked. The sl9otsin the locking ring don't line up properly with the Scion wheel I got. The stock yaris wheel has a ridge in the metal part that sits on top of two ridges in the locking right, whereas the Scion wheel does not have these ridges, and therefore mus sit crooked in the other slots in the locking ring. A bit irksome.. but it's leather!
Man what an idiot, I wish I knew about this, just wasted the money on a after market leather steering cover! 😠
packetraceQuebec · Jun 26, 2012#16CTScottUSA, CT · Jun 26, 2012#17 Originally Posted by
packetrace ↑
No. They have to be removed to fit the Yaris' airbag.
CTScottUSA, CT · Dec 19, 2013#18 Originally Posted by TOLMACH ↑
F..ck .. still clicking ((
Bzinn mentions that something might need be trimmed..
Steering Wheel question Any opinions?
Thanks
I believe he is talking about the metal tab that prevents it from lining up straight (unless you tilt the clockspring a small amount).
Take the airbag off and rotate the steering wheel back and forth to see where the clicking is coming from. The TC wheel I have on Crashy does not click.