CTScottOriginal postUSA, CT · Jun 26, 2011#1This weekend I installed a used Blitz Supercharger on my 09. I was amazed as to how easy the installation actually was. I spent about 4 hours on Saturday doing the mechanical portion of the install and about an hour on Sunday morning doing the electrical portion. The person who I bought it from labeled every bolt and spacer, which definitely helped. Though, the spacers required for the replacement alternator bracket were different for my car than for his.
On Saturday, after I completed the mechanical portion, I had my daughter start the car, while I had my head under the hood, verifying that the belt was properly aligned an that there were no leaks from when I removed the fuel rail. That part went perfect, but then we had to go to a dinner party, so I had to wait for Sunday morning to do the electrical part. After scraping knuckles doing the mechanical part, the electrical part was a breeze. After completing the electrical part, I once again had my daughter at the wheel, with my head under the hood. After verifying engagement of the clutch in the three modes of operation, we were ready for a road test.
Pulling out of my driveway, I was immediately impressed with the torque difference. After cruising around our neighborhood and feeling the difference on the hills, my only regret was not having done this sooner.
The finished product:
Pulley alignment:
Alternator relocation:
Wiring:

Replies 62
marcustoronto, canada · Jun 26, 2011#2Sweet!!!!!!!!
mazillaSan Jacinto California · Jun 26, 2011#3Nice!
I'm a few steps away from my S/C still, the wait(research mainly) is killing me!
What would it take to properly paint the outside of the unit? I'd like to paint mine before the install but I don't want to disassemble the entire thing. Without having held it in my hands it's hard to take a guess... it looks like it would be pretty straight forward.
TEHxFALLEN V1.2Calabasas, CA · Jun 26, 2011#4So this is a no-frills, out of the box, used Blitz kit with nothing else special? Did you swap out the injectors or swap out anything OEM for something different? Nice install, and nice install time!
CTScottThread starterUSA, CT · Jun 26, 2011#5 Originally Posted by
mazilla ↑ Nice!
I'm a few steps away from my S/C still, the wait(research mainly) is killing me!
What would it take to properly paint the outside of the unit? I'd like to paint mine before the install but I don't want to disassemble the entire thing. Without having held it in my hands it's hard to take a guess... it looks like it would be pretty straight forward.
If you are buying a new one, then it will come in three sections, so you will just need to mask the faces and shoot the pieces. I kind of wish that I had shot mine before installing it.
CTScottThread starterUSA, CT · Jun 26, 2011#6 Originally Posted by
TEHxFALLEN V1.2 ↑ So this is a no-frills, out of the box, used Blitz kit with nothing else special? Did you swap out the injectors or swap out anything OEM for something different? Nice install, and nice install time!
Correct. I installed it all as-is and kept the stock injectors for now. I am using my YarGauge as my AFR gauge (reading the OEM wideband sensors from the ECM) and thus far am not running lean. If anything I am a bit rich (12.3) when its really under load. The only time I see over 15, is when DFCO kicks in.
TEHxFALLEN V1.2Calabasas, CA · Jun 26, 2011#7 Originally Posted by
CTScott ↑ Correct. I installed it all as-is and kept the stock injectors for now. I am using my YarGauge as my AFR gauge (reading the OEM wideband sensors from the ECM) and thus far am not running lean. If anything I am a bit rich (12.3) when its really under load. The only time I see over 15, is when DFCO kicks in.
Awesome. What else will you be adding in addition to the Blitz kit?
CTScottThread starterUSA, CT · Jun 26, 2011#8 Originally Posted by
TEHxFALLEN V1.2 ↑ Awesome. What else will you be adding in addition to the Blitz kit?
I have an AFE Intake that will be going on now, and I am planning on doing something with the exhaust as well.
TEHxFALLEN V1.2Calabasas, CA · Jun 26, 2011#9Sweet! I'll be watching this thread!
camelllHome · Jun 27, 2011#10Awesome! Glad everything went well. I did have to do some adjustments with the spacers to make my pulley align correctly as I shredded a couple of belts when I first installed it, but once I got that corrected I never had any more problem with that. I loved and miss the whine of the compressor!
12.3 is a good spot to be in under full boost, my wideband hovered around 12.0 under full load and sometimes it would run in mid to high 11's. The unit is supposed to be around 7 psi but it was not uncommon to see boost pressures 9-10 on my autometer boost/vacuum gauge. It could have been very possible that my gauge was wrong, I don't think it was, it calibrated itself at every power up and the vacuum was always consistent.
If you have any throttle lag I would suggest you get (or make) a throttle controller. I had a violence throttle controller and it was a great complement to the system, but I had serious throttle lag. That was a "my only regret is I wish I would have done it sooner moment" aside from the compressor but I did that as soon as they were available.
You may also want to put the fuel controller in the cab, I had it in the engine compartment but I wish I would have put it inside to protect it from the elements as it will get dusty and dirty.
One more interesting tidbit is that you and thebarber are the only 2 that have a pink wire on the fuel controller. So if you go to the blitz website and look at there manual and wiring diagram it is different. If you have any questions or ever run into any problems please shoot me a pm and I will try to help you out if you need it, which I doubt you will, considering your already a highly knowledgeable and smart person.
Have fun and enjoy the compressor as much as I did, god knows I am missing it right now but the dealership wanted it off the car to take it for trade when my car comes in.👍
camelllHome · Jun 27, 2011#11watch out for any intake that has a bypass valve in it, like the TRD as it can get sucked into the compressor. I have no idea if the AFE does or not.
TEHxFALLEN V1.2Calabasas, CA · Jun 27, 2011#12^
The AFE is a SRI and has no bypass valve whatsoever, so he should be okay.
camelllHome · Jun 27, 2011#13Awesome, I just wanted to throw that out there.👍
You may also want to get or make a catch can.
CTScottThread starterUSA, CT · Jun 27, 2011#14 Originally Posted by
camelll ↑ Awesome! Glad everything went well. I did have to do some adjustments with the spacers to make my pulley align correctly as I shredded a couple of belts when I first installed it, but once I got that corrected I never had any more problem with that. I loved and miss the whine of the compressor!
12.3 is a good spot to be in under full boost, my wideband hovered around 12.0 under full load and sometimes it would run in mid to high 11's. The unit is supposed to be around 7 psi but it was not uncommon to see boost pressures 9-10 on my autometer boost/vacuum gauge. It could have been very possible that my gauge was wrong, I don't think it was, it calibrated itself at every power up and the vacuum was always consistent.
If you have any throttle lag I would suggest you get (or make) a throttle controller. I had a violence throttle controller and it was a great complement to the system, but I had serious throttle lag. That was a "my only regret is I wish I would have done it sooner moment" aside from the compressor but I did that as soon as they were available.
You may also want to put the fuel controller in the cab, I had it in the engine compartment but I wish I would have put it inside to protect it from the elements as it will get dusty and dirty.
One more interesting tidbit is that you and thebarber are the only 2 that have a pink wire on the fuel controller. So if you go to the blitz website and look at there manual and wiring diagram it is different. If you have any questions or ever run into any problems please shoot me a pm and I will try to help you out if you need it, which I doubt you will, considering your already a highly knowledgeable and smart person.
Have fun and enjoy the compressor as much as I did, god knows I am missing it right now but the dealership wanted it off the car to take it for trade when my car comes in.👍
I was going to lengthen the wires and move the fuel controller internal, but ended up sealing the wire entry point and attaching it to the ECM.
The extra "pink" wire was for RPM. I find it odd that the newer version doesn't use a tach input. Or, perhaps the old one had the input, but didn't actually do anything with it.
ChitownY@RisChicago · Jun 27, 2011#15Sick job, man🙌 You guys seem to have mad knowledge on cars to be DIY on this. Unfortunately for me, I can't bring myself to drop 3500 plus 1000 on labor for 30hp. When my Yaris is paid off in 2013, hopefully I can get my hands on a Blitz for under a grand and maybe then I'll be
derickveliz2Central, MA · Jun 27, 2011#16Nice! CTScott
keep us posted this is a great mod!
D.
mazillaSan Jacinto California · Jun 27, 2011#17Haha! This was Camells S/C? That was almost in my car...good times.
thebarberGrand Rapids, MI · Jun 27, 2011#18welcome to the s/c club, scott
ecc_33OHIO · Jun 27, 2011#19did this change you're guys fuel milage much?
CTScottThread starterUSA, CT · Jun 27, 2011#20 Originally Posted by
ecc_33 ↑ did this change you're guys fuel milage much?
I'll let you know in about a week. From what others have said, they have dropped 3-5 MPG, depending on how they drive. Also, the Blitz has a four position control switch that you install in the cabin that allows you to adjust when the superchargers clutch is engaged. You can set it for low, med, or high (which determines with how much throttle it engages) or off. That was the selling point for me - The ability to have some extra guts, or be MPG conscious at will.
derickveliz2Central, MA · Jun 27, 2011#21AWESOME!
CTScott, could you guide me installing one like that? from A to B that would be such a nice project!
D.
mazillaSan Jacinto California · Jun 27, 2011#22 Originally Posted by
CTScott ↑ I'll let you know in about a week. From what others have said, they have dropped 3-5 MPG, depending on how they drive. Also, the Blitz has a four position control switch that you install in the cabin that allows you to adjust when the superchargers clutch is engaged. You can set it for low, med, or high (which determines with how much throttle it engages) or off. That was the selling point for me - The ability to have some extra guts, or be MPG conscious at will.
Pic of the cabin control? I've been wondering what it looks like...
CTScottThread starterUSA, CT · Jun 27, 2011#23 Originally Posted by
derickveliz2 ↑ AWESOME!
CTScott, could you guide me installing one like that? from A to B that would be such a nice project!
D.
There are so many threads on the install process, that I actually didn't bother documenting it. The Blitz instructions are good, except for not showing as well as you'd like which bolts go where. Also, for the alignment of the alternator, I think that laying a belt across the pulleys and experimenting with the spacers works better than using the specific ones stated in the doc and then watching the belt pop off when you start it for the first time.
camelllHome · Jun 27, 2011#24I had it set to low (engage at 25% throttle) all times and I have not noticed a difference in mileage. Still get 30-32 mpg same as it was brand new, same with supercharger and same now it is off. I never babied the car to squeeze better gas mileage out of it, with or without the supercharger.
CTScottThread starterUSA, CT · Jun 27, 2011#25 Originally Posted by
mazilla ↑ Pic of the cabin control? I've been wondering what it looks like...
It's a tiny little panel (about 1.5" x 1") with a tiny rotary switch and an LED. I installed mine on the back of the driver's side cubby, next to the HVAC controls.

enviriCT · Jun 27, 2011#26awesome! now i want one even more :(
CTScottThread starterUSA, CT · Jun 27, 2011#27thebarberGrand Rapids, MI · Jun 27, 2011#28i leave mine on low all the time now....i have intake, header and exhaust and still get 7.5L/100km (31.4mpg) mostly city driving
when it was around freezing i put it on medium so that i A: had traction and B: i wasn't running boost all the time for economy reasons
LtNoogieWest Hills, CA · Jun 28, 2011#29I am glad you are enjoying it. Do you have a manual or automatic?
derickveliz2Central, MA · Jun 28, 2011#30I've seen them for $3,800 at MI, but could you translate for me in real world how much of gian (power) this mods is? I mean... Yaris 1.5 is about 106 hp.
Just curious!
Thanks
D.
cali yarisCanoga Park, CA · Jun 28, 2011#31I don't have any in stock, I'll call tomorrow so we can have a current price on them new.
Kaotic LazagnaCentral Valley, CA · Jun 28, 2011#32 Originally Posted by
derickveliz2 ↑ I've seen them for $3,800 at MI, but could you translate for me in real world how much of gian (power) this mods is? I mean... Yaris 1.5 is about 106 hp.
Just curious!
Thanks
D.
I think it puts down ~130 to the wheels. Someone had a video of their Vitz on a dyno at a car show with it, can't remember who tho.
Kaotic LazagnaCentral Valley, CA · Jun 28, 2011#33CTScottThread starterUSA, CT · Jun 28, 2011#34 Originally Posted by
LtNoogie ↑ I am glad you are enjoying it. Do you have a manual or automatic?
Auto
thebarberGrand Rapids, MI · Jun 28, 2011#35peterpoop ran about 130-135 whp/wtq with intake header and exhaust
he was about 135-140whp/wtq with fatter powerbands after a tune with emanage ultimate...his dyno sheets are somewhere on the site
CTScottThread starterUSA, CT · Jul 1, 2011#36Last night via my TechStream tool, I did the "Reset Memory" procedure for the ECM's control of the automatic transmission. This causes the ECM to re-learn its shifting patterns based on your driving style. After doing the reset with the tool, you have to drive it, doing a lot of starts and stops for 15 minutes, so I did so pretty aggressively. Driving around today with it, I notice a big difference in the shifting patterns, where they better match the way that the boost kicks in.
KitelessUnion City, CA - U.S.A. · Jul 1, 2011#37Is there any way to make this setup California Carb Legal?
- Jason
CTScottThread starterUSA, CT · Dec 12, 2012#38 Originally Posted by TOLMACH ↑
Just curious, does the Kit comes with any wiring instructions?
Yes, and they are pretty easy to follow.
CTScottThread starterUSA, CT · Dec 12, 2012#39 Originally Posted by TOLMACH ↑
^ Any plans to install the engine cover (the black piece)?
I eventually trimmed my painted OEM one and reinstalled it.
G-AmmoThe Netherlands · Dec 13, 2012#40So awesome... In maybe a year or 2 i will also have a supercharger...
ON A 1.0 3 CYLINDER ENGINE (1KR-FE)
Yeah :3
AstromanWenatchee, WA · Dec 15, 2012#41*sigh* can't wait to join the club.
david_827boston, MA · Dec 18, 2012#42 Originally Posted by
Astroman ↑ *sigh* can't wait to join the club.
+1....
jcboyAsia · Dec 19, 2012#43that's so sick. i wish superchargers were a common thing here, as i hate everyone saying Turbo here. personally i think the superchargers are the middle ground for NA and turbo, or best of both worlds.
unfortunately here in the philippines supercharger are soooooo rare, thus maintenance would be a PITA.
good post scott! always been a fan of your work! 🤤 🤤
CTScottThread starterUSA, CT · Jan 1, 2013#44I have only seen the Yaris Blitz Kits that include just the one tensioner pulley.
For belt length, get it mounted, move the tensioner pulley to its end of travel where the distance around the pulleys would be the shortest, and then wrap a piece of non-stretchy rope around the belt path. Mark the length, measure it, and then look for a 6 or 8 rib belt as close to that measurement as possible. Since you will be working from the shortest length, with the position of the tensioner pulley, only go up in belt length to meet a standard one. You can go up to an inch longer to have the belt still be in the range that the tensioner will work with.
thebarberGrand Rapids, MI · Jan 1, 2013#45My yaris was supercharged, no a/c.
Gatorback part # 040560

thebarberGrand Rapids, MI · Jan 3, 2013#46 Originally Posted by
TOLMACH ↑
Off: why do you say was.. what happened?
Parted out and sold the car
birdmanUSA · Jan 8, 2013#47When you add a modification like this does it put a lot of extra wear and tear on the motor?
CTScottThread starterUSA, CT · Jan 8, 2013#48With any changes to the air/fuel ratio and flow to an engine there is the potential for damage. A person over on the Micro Image forum recently damaged his engine with use of a Rotrex supercharger. He didn't mention how much boost he was running, as compared with the 6 PSI of the Blitz, but even the Blitz can do damage if the engine is allowed to run too lean.
cali yarisCanoga Park, CA · Jan 8, 2013#49 unfortunately here in the philippines supercharger are soooooo rare, thus maintenance would be a PITA.
Installed correctly, there is no additional maintenance.
why?harnett county NC · Jan 9, 2013#50 Originally Posted by
jcboy ↑ that's so sick. i wish superchargers were a common thing here, as i hate everyone saying Turbo here. personally i think the superchargers are the middle ground for NA and turbo, or best of both worlds.
unfortunately here in the philippines supercharger are soooooo rare, thus maintenance would be a PITA.
good post scott! always been a fan of your work! 🤤 🤤
You get less gas mileage because the supercharger is always going ( well not always, as the blitz does have a clutch) and a small turbo tuned right can do the same thing a supercharger can but get better gas mileage and more power. It would just cost more. And be more of a hassle.
But Philippines? isn't that the land of dirt cheap labor costs?