Yarisworld Archive

Hatchback Trunk Cylinders

76 posts · 37,994 views · page 1 of 2

BetriventOriginal postedmonton · Jun 2, 2011#1
Anybody find theirs doesn't lift the trunk all the way up anymore? And if you did what did you do to fix it short of buying a new one? They seem to be well over a hundred dollars EACH.

Replies 75

Bluevitz-rsOshawa, Ontario, Canada · Jun 2, 2011#2
try car quest or crappy tire
BetriventThread starteredmonton · Jun 2, 2011#3
For.. what? New ones?
Bluevitz-rsOshawa, Ontario, Canada · Jun 2, 2011#4
yeah... but is it that the won't hold the hatch up, or just that they don't lift it on their own anymore. Cuz mine never really lifted the hatch much past half way unless it's really hot out, but the never dropped once pushed up.
CTScottUSA, CT · Jun 3, 2011#5
The Yaris spring shocks are 6" stroke, 17" extended mounting center line, 80 lb (359N) gas shocks with ball socket ends. Doing a quick web search based on those measurements, I've seen generic replacements for as little as $15 each.

I am tempted to upgrade to 100 lb or 150 lb ones (which are common ratings) too see if it helps with the winter sag. One evening this past Winter In a dark parking lot I whacked my head so hard that I drew blood.
mazillaSan Jacinto California · Jun 3, 2011#6
Originally Posted by CTScott ↑
One evening this past Winter In a dark parking lot I whacked my head so hard that I drew blood.

I did the same thing in my garage the other day because the damned hatch was sitting a little lower than normal(I didn't help it up the last little bit). I didn't draw blood, but it hurt enough that I had to stop what I was doing for a minutes and curse the heavens. Now that I've sound deadened the hatch it's a little heavier, which in turn has made it open even less...

I'd be interested in a part number if you decide to swap in something more powerful, and it works.
ShinareOklahoma City, OK · Jun 3, 2011#7
LOL I thought I was the only one that would do something like this! Gave myself a nice little goose egg a while back doing the same thing. I felt a little sheepish... heh
thebarberGrand Rapids, MI · Jun 3, 2011#8
ya, mine suck in winter, too

had the same issue in my matrix....though i had them replaced under warranty once...
ROCKLANDTOYOTAROCKLAND TOYOTA/SCION · Jun 3, 2011#9
Originally Posted by CTScott ↑
The Yaris spring shocks are 6" stroke, 17" extended mounting center line, 80 lb (359N) gas shocks with ball socket ends. Doing a quick web search based on those measurements, I've seen generic replacements for as little as $15 each.

I am tempted to upgrade to 100 lb or 150 lb ones (which are common ratings) too see if it helps with the winter sag. One evening this past Winter In a dark parking lot I whacked my head so hard that I drew blood.
my experience with aftermarket hatch struts has gotten me no where. i had 2 different auto supply stores order me these things with a toyota part number as reference and they were wrong both times.....
CTScottUSA, CT · Jun 3, 2011#10
Originally Posted by ROCKLANDTOYOTA ↑
my experience with aftermarket hatch struts has gotten me no where. i had 2 different auto supply stores order me these things with a toyota part number as reference and they were wrong both times.....
I believe that the AP Products 010-170 would be a direct replacement.

This place sells the 010-170 for $18 each:

https://www.makariosrv.com/products/...-Products.html


Here's a pair of 120 lb ones for $30 (and the same vendor also carries 101 and 110 lb ones for the same price):

http://cgi.ebay.com/ebaymotors/ws/eB...em=#vi-content
ROCKLANDTOYOTAROCKLAND TOYOTA/SCION · Jun 3, 2011#11
^^someone should buy these and see if it works.....
CTScottUSA, CT · Jun 3, 2011#12
Originally Posted by ROCKLANDTOYOTA ↑
^^someone should buy these and see if it works.....
I just ordered a pair of the 101 lb ones.
mazillaSan Jacinto California · Jun 3, 2011#13
Originally Posted by CTScott ↑
I just ordered a pair of the 101 lb ones.

Sweet.
ShinareOklahoma City, OK · Jun 3, 2011#14
two 120 pounders... would that be pretty difficult to close once the hatch was opened?
CTScottUSA, CT · Jun 3, 2011#15
Originally Posted by Shinare ↑
two 120 pounders... would that be pretty difficult to close once the hatch was opened?
The pair of 120s might be too much, that's why I ordered the pair of 101s to test. They shipped today by USPS from New York, so they should be in my hands tomorrow or Monday.

I have a spare set of OEM ones from Crashy. I did a test today where I measured the compression force at ambient (72F) and then again after putting one in the freezer for an hour (20F). At 72F the compression force was 80 lbs. At 20F it decreased to 72 lbs.
BetriventThread starteredmonton · Jun 4, 2011#16
Holy awesomesauce CT. I've been busy the last couple days so I haven't been able to check but I'm eagerly anticipating your results!
auxmikeLI, New Yawk · Jun 4, 2011#17
Yeah, I have to push mine up so it opens all the way. Looking forward to the results!
thepartsmancomethmidwest · Jun 4, 2011#18
Luckily me wife primarily uses the yaris, because I bang my head off the damned thing every time I open it! I have some spare Sienna struts laying around I might try (they were warranty scrap)
BetriventThread starteredmonton · Jun 7, 2011#19
Any update CT?
CTScottUSA, CT · Jun 7, 2011#20
Originally Posted by Betrivent ↑
Any update CT?
They haven't arrived yet.

Yesterday though, I was helping enviri wire up one of my Push to Start modules and his xD turn signal mirrors on his 2010 LB and I happened to mention the whole hatch sag issue. He said that he doesn't have the issue, so we compared his hatch to mine. His pops up into the fully open position, where mine slowly moves to about 3/4 of the way up. I realized that mine used to move the way that his does, so just replacing them with the standard would probably be fine, but I will still try the 101's once they arrive.
BetriventThread starteredmonton · Jun 7, 2011#21
I'll still wait for your results for a better decision.. thanks!
CTScottUSA, CT · Jun 12, 2011#22
I received the new 101 lb ones yesterday (8 days from order to receipt). I installed them this morning (it literally takes less than 1 minute per side to replace them). The new ones make a huge difference. The 101 lbs of lift make the hatch pop all of the way open very quickly (to the point where there is a little bounce at the end of travel). I will post a video comparison later, but here's a photo of the new ones vs. the OEM. The shaft is stainless steel on the replacements, whereas it was painted on the OEM ones.

Gas Springs.jpg
BetriventThread starteredmonton · Jun 12, 2011#23
Excellent. If they fit then I'll grab a pair for myself
EDIT: I'll wait for a video though- and whether my pack mule in the states is coming up to Canada this weekend so I don't have to pay as much for shipping ;)
R2D2ME · Jun 12, 2011#24
CTScott,

Is it still relatively easy to close the hatch with the beefier cylinders?

Thanks,

R2
BetriventThread starteredmonton · Jun 12, 2011#26
I believe that is the right set yes. I'm just waiting for CT's video before I buy.
auxmikeLI, New Yawk · Jun 12, 2011#27
You just don't want the door to fly open fast enough to eventually tear out the mounts!
BetriventThread starteredmonton · Jun 12, 2011#28
Originally Posted by auxmike ↑
You just don't want the door to fly open fast enough to eventually tear out the mounts!
Or smash you in the face
auxmikeLI, New Yawk · Jun 12, 2011#29
I ordered a set. Heck for under $40 I'll take the gamble. I'm in NY so I had to pay the sales tax and it better not take 8 days in state to ship, I hope! I'll ask CT how you get them off and on..CT?
auxmikeLI, New Yawk · Jun 12, 2011#30
Originally Posted by Betrivent ↑
Or smash you in the face
Yeah, now I'll have to leap back vs. being hunched over to not get hurt...
BetriventThread starteredmonton · Jun 12, 2011#31
I'm eagerly anticipating his video.. I hope he took a before and after!
auxmikeLI, New Yawk · Jun 12, 2011#33
Holy crap! The whole back of the car rises! No more helping up that door anymore. Can't wait to try mine out when they come....
Thanks for coming through with that real pro lookin' vid too!
CTScottUSA, CT · Jun 12, 2011#34
In the before video, my hand is cut-off after initially opening the hatch, but each time time there is a pause, I then push the hatch open a bit more.

The new ones are definitely a bit more potent than necessary, but I suspect that after a couple of weeks they will calm down.
auxmikeLI, New Yawk · Jun 12, 2011#35
I plan to open the hatch then "follow" the door as it goes up to avoid tearing out the mounts. A guy on here is a courier in the UK I think and did that from opening his hatch so many times daily as part of his deliveries.
Now imagine if you had gotten the even more powerful ones????
CTScottUSA, CT · Jun 12, 2011#36
To swap them out:

1. Prop the hatch fully open. I used a fiberglass painter's pole.

hatch prop.jpg

2. Using a small flat-blade screwdriver, pry the clip up about 1/8" (you don't need to fully remove the clip).

3. With the clip up, pull the end off of the ball.

4. Do the same on the other end of the gas spring.

5. Pry up the clips on the new one.

6. Slip the bottom onto the ball (the bottom is the larger diameter end).

7. Rotate the top (clockwise) until it lines up with the ball and slip it on.

8. Push the clips back down.

9. Repeat on the other side.
BetriventThread starteredmonton · Jun 13, 2011#37
Holy crap that snaps up hard. I got myself a pair of 94lbs. I won't have it for at least a week or two, I'll post results when I get them.
auxmikeLI, New Yawk · Jun 13, 2011#38
Did'nt know he had 94 pounders. But like CT said, after a while they tend to settle and get more tame and smooth as they go up. CT, any indication as to country of mfg?
mazillaSan Jacinto California · Jun 13, 2011#39
Originally Posted by auxmike ↑
. A guy on here is a courier in the UK I think and did that from opening his hatch so many times daily as part of his deliveries.
Now imagine if you had gotten the even more powerful ones????
I think you'll be fine, my car was a courier vehicle and has more than 450,000 miles on it, there is no sign of damage.
toastNappanee, IN · Jun 13, 2011#40
Looks good CT. My door is a bit heavier than stock as I did some sound insulating on it Currently I have to push it up to help it along and it will start to come down on its own so I'm hoping the 101's will be just right. Will let you know. Thanks for the great find and video.
Klink10910 · Jun 13, 2011#41
Thanks CT for doing this.
Bluevitz-rsOshawa, Ontario, Canada · Jun 13, 2011#42
If I'm not mistaken the OEM ones have a damping force at the end to they don't fly open like that, don't they?

Try swapping one of them out to the OEM one and see how it opens. I don't think them flying open to the point of them popping the hatch up is either safe or good for the struts.
CTScottUSA, CT · Jun 13, 2011#43
Originally Posted by Bluevitz-rs ↑
If I'm not mistaken the OEM ones have a damping force at the end to they don't fly open like that, don't they?

Try swapping one of them out to the OEM one and see how it opens. I don't think them flying open to the point of them popping the hatch up is either safe or good for the struts.
The OEM ones are just like the replacements, but have a lower force rating. The bouncing is because they have more lifting force than necessary. I am going to give them a month or so to settle in (with me holding the hatch when opening). If they continue to bounce at that point, I will switch to ones with a closer rating to OEM.
Bluevitz-rsOshawa, Ontario, Canada · Jun 13, 2011#44
Ok. Because the ones on my '05 slow down the last few inches so you can't pop it up all the way. Our '03 Matrix is the worst though. They're so stiff the last 6 inches of pushing the hatch up I broke one of them off the peg.
CTScottUSA, CT · Jun 13, 2011#45
Originally Posted by Bluevitz-rs ↑
Ok. Because the ones on my '05 slow down the last few inches so you can't pop it up all the way. Our '03 Matrix is the worst though. They're so stiff the last 6 inches of pushing the hatch up I broke one of them off the peg.
The slowing down at the end is the equalization of weight. If the lifting force equals the weight, they will do that rather than snapping up.
Bluevitz-rsOshawa, Ontario, Canada · Jun 13, 2011#46
even with them off the car they still slow down at the end, well the ones on the matrix anyway.
CTScottUSA, CT · Jun 13, 2011#47
Originally Posted by Bluevitz-rs ↑
even with them off the car they still slow down at the end, well the ones on the matrix anyway.
These did as well before I put them on the car. I think it's just that they open the hatch so quickly that the damping is overcome by the inertia.
auxmikeLI, New Yawk · Jun 15, 2011#48
I just got my set, came in 3 days. They work just like CTs. I'm holding the top of the hatch as it goes up because you can actually see the metal the mounts screw into on the car body flex as it snaps up hard. I found the OEM Stabilus shocks have a cover where the rod meets the body of the shock, the Ebay ones don't and you just see rubber washers. Also, the OEMs have no play in the shock , the Ebays wobble in the center between the gas cylinder and the silver rod.
I'm guessing these are from China, whereas the OEMs are Mexico or mabye even good ol' Japan.
We'll see how they hold up in winter. I'm saving the old ones, just in case.....
Install is easy and I balanced the hatch with my head as I did one side at a time. These things arrived not in a box , but bubble wrap tube! Also, no instructions either.
For the price, well worth it.
Thanks Ct for shining the light on this for us! 🍻
mazillaSan Jacinto California · Jun 15, 2011#49
I ordered the 90lb shocks two days ago....
ljming99Singapore · Jun 15, 2011#50
I cant imagine how the boot lid would shoot upwards if it was a carbon fibre lid. Probably enuff "smack" to be sent to the ER =P