Yarisworld Archive

Hatchback Trunk Cylinders

76 posts · 37,994 views · page 2 of 2

Replies continued

auxmikeLI, New Yawk · Jun 17, 2011#51
I think it would mortally damage a CF hatch judging how the sheet steel cringes at the rebound.
ljming99Singapore · Jun 17, 2011#52
Mine is close to 5 years soon and the shocks are weak to the point where i pretty much have to use my hand to push it past mid way so that it is able to hold on its own.

I would prefer stock replacement as i keeping the option of changing to CF open.
mazillaSan Jacinto California · Jun 17, 2011#53
Originally Posted by ljming99 ↑
Mine is close to 5 years soon and the shocks are weak to the point where i pretty much have to use my hand to push it past mid way so that it is able to hold on its own.

I would prefer stock replacement as i keeping the option of changing to CF open.

I wonder if the worn OEM's would be perfect for the reduced weight CF hatch?
toastNappanee, IN · Jun 17, 2011#54
OK... I got my 101# struts installed today and even with my heavy insulated hatch lid that sucker flies up fast and bounces hard. A bit too much for my taste so I took one of the new ones off and replaced it with one of the old weaker ones. So with one 101# and one old tired lift the hatch raises up on it's own very smoothly all the way to the top with no bounce. I'm thinking a set in the mid 90# range would be perfect.
BetriventThread starteredmonton · Jun 21, 2011#56
Those look much more normal!
auxmikeLI, New Yawk · Jun 21, 2011#57
[QUOTE=mazilla;588410]I got the 90#'s in today, did the swap...click the pic for the video.

Is that a Yaris? Almost looks like a Scion Xd or something else?🤷
mazillaSan Jacinto California · Jun 21, 2011#58
[QUOTE=auxmike;588668]
Originally Posted by mazilla ↑
I got the 90#'s in today, did the swap...click the pic for the video.

Is that a Yaris? Almost looks like a Scion Xd or something else?🤷

It's the same 07' Yaris in my avatar.
BetriventThread starteredmonton · Jun 27, 2011#59
I installed my 94s yesterday. Took literally 60 seconds each, most of which was spent trying to pry the original clips off the stock shocks so I can remove them. These new ones just pop on, easiest thing ever!
dzcabNortheast · Oct 6, 2011#60
Can anyone give me the sellers that you uses from EBay cause i ordered a set from makarios RV and the shipment is still pending and I need to send to PR ASAP. Or if someone knows the part number that will help.
BetriventThread starteredmonton · Oct 6, 2011#61
I can't actually find it anymore
CTScottUSA, CT · Oct 6, 2011#62
Originally Posted by dzcab ↑
Can anyone give me the sellers that you uses from EBay cause i ordered a set from makarios RV and the shipment is still pending and I need to send to PR ASAP. Or if someone knows the part number that will help.
I have had the eBay ones on my car for a while now and they still are a bit more than ideal. I would stick with ones that are rated as direct replacements, like these ($52 for a set from Amazon):


http://www.amazon.com/Lift-Supports-.../dp/B0044EKBMK
mazillaSan Jacinto California · Oct 7, 2011#63
The 90lb Ebay shocks work perfectly. When I get to my computer I'll take a look and see if I can get the sellers info.
dzcabNortheast · Oct 12, 2011#64
I ordered the makarios one from AP Products and they fit but don't close hatch. Anyone have the link to the eBay ones. I have searched all over eBay and can't find. I need to send some ASAP, or a part number from Toyota.
CTScottUSA, CT · Oct 12, 2011#65
Originally Posted by dzcab ↑
I ordered the makarios one from AP Products and they fit but don't close hatch. Anyone have the link to the eBay ones. I have searched all over eBay and can't find. I need to send some ASAP, or a part number from Toyota.
What do you mean by "don't close hatch"?


The ebay listing is gone for the ones that I purchased.

The genuine Toyota ones are:

Without rear wiper:
Right: 68950-0W391
Left: 68960-0W391

With rear wiper:
Right: 68950-0D022
Left: 68960-0D012
dzcabNortheast · Oct 12, 2011#67
[QUOTE=CTScott;609075]What do you mean by "don't close hatch"?

I ordered the ones that were thought to fit from makarios and they strut itself is about .5 inches longer than oem one and when u try to close the tailgate only goes down about 3/4 but wont fully close all way down.
CTScottUSA, CT · Oct 12, 2011#68
[QUOTE=dzcab;609161]
Originally Posted by CTScott ↑
What do you mean by "don't close hatch"?

I ordered the ones that were thought to fit from makarios and they strut itself is about .5 inches longer than oem one and when u try to close the tailgate only goes down about 3/4 but wont fully close all way down.
Got it. Which model number did you order from them?
Redbat01Pennsylvania · Dec 1, 2012#69
Success story: I own a 2008 Yaris 3-door hatchback. This morning, I replaced the hatch struts. It was a simple job and the new struts fit perfectly and work fine. It was about 40 degrees Fahrenheit outside when I installed them.

Brand Name: Columbia Struts
Columbia Part Number: CS1720-90
Rod & Tube Size: 8MM x 18MM
Extended Length: 17.20 inches
Minimum Stroke: 7 inches
Force in Pounds: 90 lb
Purchased from: "strut-your-stuff-here" on EBay
Price for two struts, including shipping: $35.88

My thanks to CTScott and everybody else who wrote about their experience with hatchback struts. Your advice saved me the cost of buying the struts from the dealer.
watersoilairOntario, Canada · Dec 12, 2012#70
This happens with my hatch too. I have to push the hatch up, otherwise I'll hit my head...done that a few times sadly.
mazillaSan Jacinto California · Dec 15, 2012#71
My ebay struts are still perfect, and I use the hatch several times(possibly a dozen+) per day M-F...haven't hit my head since I posted about it.
GrayYarisNY · Apr 3, 2014#72
2014 update. I looked around a few places and I found these on Amazon:

http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1


If I remember correctly, they are cheaper on Amazon than on Lift Supports Depot's actual site. It is about 30-40 degrees Fahrenheit here and they are working fine. Hopefully they last a while. Before I got them, I had to hold my hatch up as it would slam shut otherwise.
frambachMurfreesboro, TN · Apr 5, 2014#73
I (like everyone else) has the sagging hatch problem too. On a lowered car, I find it's quite easy to bump my head unless I take the time an manually push the hatch up and help it all the way to the stopping point.

Thanks to everyone for posting their findings, part numbers, and videos. All your work is appreciated.
ezhacker1San Francisco · May 22, 2014#74
I just installed 90# struts. Its much much better than the 5 year old stock ones. I have no idea if those went bad, or its always been like that, cuz of the extra weight in hatch from sound deadening material.

After playing with the hatch a bit, i want to go with 100#, because it still cant push the sound deadened hatch up smoothly without a little tug at the start (after pushing the lock button). I dont have the bounce that others have posted. Would the iQ hatch popper mod be a solution, the thrusters would push it first then the struts take over?
sven337France · Jun 14, 2020#75
Necroing this thread - I changed the cylinders for new ones that were sold as compatible. Their ejection force didn't seem to be off the charts, at least for a few months the hatch opened *normally* again.
But yesterday, a weld point broke.


The part with the round nipple attaches to the cylinder, and it is welded in two points to the hatch, one of them broke and tore the sheet metal a little.

I'm looking for ways to fix that. I'll call the body shops around here tomorrow, but I fear they'll just tell me to replace the hatch, and that would be a waste.

Any ideas?