Where are you MUSKOKA???????
Waiting for a certain GTA Blitz install...
66 posts · 15,179 views · page 1 of 2
Replies 65
Finally installed the NST pulley and shifter extension last weekend. DC header and Blitz Compressor still to attack. I'll have more personal time now that racquetball season is done.
Beverages of choice and BBQ for a weekend installation team!
Beverages of choice and BBQ for a weekend installation team!
Just identify a weekend and let's get her done.
HMMM
^ new baby + s/c install event = dead man??
more than likely.Originally Posted by WeeYari ↑^ new baby + s/c install event = dead man??
^ didn't realize you had your 2nd one already -- Here's Big Congrats man! 👍
-toy
-toy
^ he hasn't yet, but by the time MUSKOKA gets around to an install, he will have. Hell, by the time MUSKOKA gets around to it, thebarbers' 1st one may be off to college.
lol @ muskoka install 😆
when's the due date? man he's gonna have a handful..., i should know I have three!
-toy
when's the due date? man he's gonna have a handful..., i should know I have three!
-toy
^ tomorrow I believe 😲
👏 congrats to adam and wife.
-toy
-toy
yessir, due date is tomorrow...
We'd best give Adam a week or so to catch up on the impending lost sleep.
What's your best guess Adam?
What's your best guess Adam?
best guess for what?Originally Posted by MUSKOKA800 ↑What's your best guess Adam?
^ when you'd be free without risk of death I presume.
😆 Procisely!Originally Posted by WeeYari ↑^ when you'd be free without risk of death I presume.
PM sent re: July 9th.
got them PM, ill have to run it by the boss, but things are pretty nuts around here recently...
ooo i see how it is, im MIA for a while and i get sold out :P
Back at ya.Originally Posted by MUSKOKA800 ↑PM sent
The more the merrier! Well, to some small degree anyway.Originally Posted by yaris2010RS ↑ooo i see how it is, im MIA for a while and i get sold out :P
If you can make it for long enough for food and to wire it up, that's where I'm lost.Originally Posted by thebarber ↑got them PM, ill have to run it by the boss, but things are pretty nuts around here recently...
we'll have to borrow echo_hrs's sheets....lol, or copy my car
ill see what i can swing
going to be on paternity leave as of next week... ;)
ill see what i can swing
going to be on paternity leave as of next week... ;)
Okay,
We're on for Sat. July 9th, 9 a.m. at my home in Burlington.
Any Yaris brethern not already in the loop but who are interested in attending please send me a PM to RSVP and for address details.
We're on for Sat. July 9th, 9 a.m. at my home in Burlington.
Any Yaris brethern not already in the loop but who are interested in attending please send me a PM to RSVP and for address details.
shitty, lol. id be all for going and helping out (or shooting the shit lol)but toronto indy on the 9th
So...you'll remain MIA then. 😉Originally Posted by yaris2010RS ↑shitty, lol. id be all for going and helping out (or shooting the shit lol)but toronto indy on the 9th
I've not done the Toronto (Molson) Indy since the IRL split. Hopefully the series can regain it's stature now that they've re-united. Tough with CrashCar hogging so much of the sponsorship fundage.
Weather looks great for Saturday! 27 and sunny. Time to spin some wrenches.
damn it if ur your a little closer im in...
You need a bumper sticker that says that. 🙄Originally Posted by marcus ↑damn it if ur your a little closer im in...
lol.. some people might think its something else... dont drive by jarvis and queen street...he heOriginally Posted by WeeYari ↑You need a bumper sticker that says that. 🙄
marcus, I'm in Burlington, not Regina. 🤷Originally Posted by marcus ↑damn it if ur your a little closer im in...
A fine chance to blow all that carbon out of your city-mobile.
Just 45 minutes from Kennedy & 401. Bring a freind and enjoy the HOV lane along the 403 and QEW. 👍
love to go but i cant do long drive for now since water pump is shot...i cant even go to wednesday meet since my schedule is thursday... oh make sure you guys check your water pump pulley check the inner part for pink stuff....mine was now making grinding bearing sound..damn annoying..Originally Posted by MUSKOKA800 ↑marcus, I'm in Burlington, not Regina. 🤷
A fine chance to blow all that carbon out of your city-mobile.
Just 45 minutes from Kennedy & 401. Bring a freind and enjoy the HOV lane along the 403 and QEW. 👍
Just logged in today, hopefully i can get the address I'm off today first Saturday in a long while.
been busy w/ the kids today, sorry i couldnt make it
hope the install went smoothly
hope the install went smoothly
Success!!!!!!!
The fuel controller pin locations & wire colours on this Blitz unit were completely different from ours, so there was some stress when figuring out how they all translated, but thankfully we got it all sorted...lol...
Cheers
Cheers
success sounds good!! congrats..
vids/pics or it didnt happen
She's got some giddy-up now!
Special thanks to Iggy888, WeeYari and echo_hrs. Couldn't have done it without them. 👏
Iggy took a mess of and will post them somewhere soon. Stay tuned.
thebarber, your lunch has gotten cold. I did take care of the beer for you though. 🍻
Adrian, sorry I missed your PM. We were already outside wrenching by then.
Special thanks to Iggy888, WeeYari and echo_hrs. Couldn't have done it without them. 👏
Iggy took a mess of and will post them somewhere soon. Stay tuned.
thebarber, your lunch has gotten cold. I did take care of the beer for you though. 🍻
Adrian, sorry I missed your PM. We were already outside wrenching by then.
Thanks again Pete for having us all over.
Here are some photos documenting how the day progressed:
Engine cover and intake removed:
Picture not included in this copy
Throttle body removed:
Picture not included in this copy
Intake manifold removed:
Picture not included in this copy
Alternator removed, dipstick rotated 180 degrees (to make room for supercharger):
Picture not included in this copy
Support bracket and pulley for the Blitz Supercharger installed:
Picture not included in this copy
Alternator re-attached to new support bracket. The alternator connects to the new bracket upside down which made re-attaching its wiring fun 😉:
Picture not included in this copy
The Blitz Supercharger assembled and ready to be bolted on:
Picture not included in this copy
MUSKOKA800 (front) and WeeYari (behind) working the Blitz Supercharger into position:
Picture not included in this copy
WeeYari making sure all the connections are good and tight:
Picture not included in this copy
echo_hrs hard at work getting the wiring harness ready to go:
Picture not included in this copy
Boost control switch installed and mounted:
Picture not included in this copy
Blitz Supercharger Installed! Time to enjoy
Picture not included in this copy
Here are some photos documenting how the day progressed:
Engine cover and intake removed:
Picture not included in this copy
Throttle body removed:
Picture not included in this copy
Intake manifold removed:
Picture not included in this copy
Alternator removed, dipstick rotated 180 degrees (to make room for supercharger):
Picture not included in this copy
Support bracket and pulley for the Blitz Supercharger installed:
Picture not included in this copy
Alternator re-attached to new support bracket. The alternator connects to the new bracket upside down which made re-attaching its wiring fun 😉:
Picture not included in this copy
The Blitz Supercharger assembled and ready to be bolted on:
Picture not included in this copy
MUSKOKA800 (front) and WeeYari (behind) working the Blitz Supercharger into position:
Picture not included in this copy
WeeYari making sure all the connections are good and tight:
Picture not included in this copy
echo_hrs hard at work getting the wiring harness ready to go:
Picture not included in this copy
Boost control switch installed and mounted:
Picture not included in this copy
Blitz Supercharger Installed! Time to enjoy
Picture not included in this copy
Well, not quite. At this point it was more like wishing it was time to enjoy.Originally Posted by Iggy888 ↑Blitz Supercharger Installed! Time to enjoy
Picture not included in this copy
Interesting thing about this install; we actually had to test drive the car to be sure the s/c was indeed working. Didn't make the characteristic and much covetted whine when the s/c engaged. You could hear the clutch activating but that was it. We figure it must be the stock air box supressing the sound of the s/c. Definitely makes the car a sleeper. No sound to announce what it has.
never seen a blitz install that went well the first time.....congrats .you got great team to help you...how long did it take excluding the breaks??
Props for the teamwork folks, and thanks to Raph for the detailed pics.
damn that thing looks complicated though and involves mega $$ 😆
wee—I recall one could hardly miss that distinct whine specifically with echo’s ride.
-toy
damn that thing looks complicated though and involves mega $$ 😆
wee—I recall one could hardly miss that distinct whine specifically with echo’s ride.
-toy
Somewhere between 6 and 7 hours.Originally Posted by marcus ↑...how long did it take excluding the breaks??
i see...it funny how echo has everything with trd.. shirt, tool box,etc....Originally Posted by WeeYari ↑Somewhere between 6 and 7 hours.
Thanks for the excellent snaps Raph!
Actually I was until about 7 p.m. (so 10 hours total) wrapping and securing that mess of wire and re-installing the cowl / wiper components.
Goes like stink now!
I'll get some colder plugs tomorrow and need to run the blended fuel out of it so it's on pure high-test before I can really thrash it.
Actually I was until about 7 p.m. (so 10 hours total) wrapping and securing that mess of wire and re-installing the cowl / wiper components.
Goes like stink now!
I'll get some colder plugs tomorrow and need to run the blended fuel out of it so it's on pure high-test before I can really thrash it.
Got an all-said-and-done pic for us. Need to see how clean she looks under there with wires wrapped and MI cover installed.
cool red intake pipe
Bring your camera to the meet on Wed. You can do the honours.Originally Posted by WeeYari ↑Got an all-said-and-done pic for us. Need to see how clean she looks under there with wires wrapped and MI cover installed.
Actually, I ran out of electrical tape but what's left to seal up is nearly invisible.
A huge length of heat-shrink tube would of made me very happy.
Installed the DCSports header today. That really brings it to life!
Note to self: start saving for new tires immediately. These Pirelli's just got sentenced to death.
Note to self: start saving for new tires immediately. These Pirelli's just got sentenced to death.