Did the O2 sensor come out of the stock header peacefully? Doing Adam's, it put up a bit of a fight. Quite a fight actually.
Waiting for a certain GTA Blitz install...
66 posts · 15,179 views · page 2 of 2
Replies continued
No problem pulling the O2 sensor however those two heat shield bolts you warned me of put up a good fight. How do 10mm bolt heads erode down to 9mm in just three years??? Finally got one out but had to grind the head of the other as there was nothing for the wrench/sockets to grab. Should have just ground off both sooner and saved much time and grief.Originally Posted by WeeYari ↑Did the O2 sensor come out of the stock header peacefully? Doing Adam's, it put up a bit of a fight. Quite a fight actually.
get all that 87 out of the tank yet?
I'm confused. By "header" are you talking about an exhaust manifold? I'm having a hard time picturing how an intake header would go onto a S/C.
header = exhaust manifoldOriginally Posted by CrankyOldMan ↑I'm confused. By "header" are you talking about an exhaust manifold? I'm having a hard time picturing how an intake header would go onto a S/C.
Aah, that makes much more sense. So at this point does MUSKOKA just need a mid-pipe, or does the stock mid perform well with an axleback kit? I looked at the stock tailpipe on mine this morning and wondered how anything manages to get out of it.Originally Posted by thebarber ↑header = exhaust manifold
An upgraded mid-pipe is on my wish list and likely will stay there due to our smog testing unless a hi-po cat was used.Originally Posted by CrankyOldMan ↑Aah, that makes much more sense. So at this point does MUSKOKA just need a mid-pipe, or does the stock mid perform well with an axleback kit? I looked at the stock tailpipe on mine this morning and wondered how anything manages to get out of it.
Question for you guys in Ontario with an SC fitted... DId you tell the ins company and what was the outcome?
knocking around the idea myself..
knocking around the idea myself..
If you tell your insurance company, they're likely to slap "race car" on your insurance policy and charge you your left testicle.
Maybe... but in the event of a claim.. if they find the SC they are likely to deny a claim too... just curious what anyone else has done. I am considering an SC but if it means insurance is difficult or next to impossible I just won't bother..Originally Posted by xixarchangelxix ↑If you tell your insurance company, they're likely to slap "race car" on your insurance policy and charge you your left testicle.
oem catylitic converter and resonator are 2" thru. after the resonator, the piping shrinks to 1.75". most exhausts for the yaris are only axlebacks, so you still have a 1.75" diameter exhaust section from the back of the res to the torsion beam.
i replaced mine with fatter piping. it made a world of difference, while still retaining my oem catylitic converter...
i replaced mine with fatter piping. it made a world of difference, while still retaining my oem catylitic converter...
Sadly it is illegal to make ANY modifications to your vehicle in Ontario.Originally Posted by SKurj ↑Question for you guys in Ontario with an SC fitted... DId you tell the ins company and what was the outcome?
knocking around the idea myself..
Of course any insurance company will go by the letter of the law come time to pay a claim and weasle their way out of payment. And if you inform them of your mod's they'll surely deny regular coverage and point you toward expensive, special plans. This is common with factory stock large displacement snowmobiles.
As far as roadside penalties by the police I'm sure they'd pile those charges on top of anything nasty (careless, DWI, racing, etc.) they had on you just to ensure some sort of conviction and if the officer could even identify the upgrades/illegal mod's. Slammed suspensions and gigantic fart pipes being easy pickings.
insurance companies will only insure you for parts they know about. so you get rear ended and have jdm tails....you will likley get oem's paid for as part of the insurance. however, if some other aftermarket tail is cheaper than an oem replacement, you might be able to talk to whatever shop is fixing the car and get them to use aftermarket parts.
if you get in a collision and your aem cai gets mangled, you're pooched.
i hit a metal plate on the 401 a couple years ago. they replaced the bumper with oem, oil pan, radiator, etc. but nothing destroyed was aftermarket....
does that all make sense? (its getting late)
if you get in a collision and your aem cai gets mangled, you're pooched.
i hit a metal plate on the 401 a couple years ago. they replaced the bumper with oem, oil pan, radiator, etc. but nothing destroyed was aftermarket....
does that all make sense? (its getting late)
Yeah my only concern is that they would turn around in an accident even if its not my fault and say "hey you didn't tell us about this sc so for failing to disclose, we are denying your claim and blackballing you for the next 6 years..."
i suggest you leave your car stock.Originally Posted by SKurj ↑Yeah my only concern is that they would turn around in an accident even if its not my fault and say "hey you didn't tell us about this sc so for failing to disclose, we are denying your claim and blackballing you for the next 6 years..."
As much as I'd love to fit the sc, yeah between the price of it and the ins co troubles... I might ask them and see what they say, but I think I know the answer already.