Yarisworld Archive

Changed my plugs after 38k (PICS)

81 posts · 38,895 views · page 1 of 2

auxmikeOriginal postLI, New Yawk · Apr 16, 2011#1
Car left the factory with NGK, Toyota dealers sell DENSO replacements. Car seems to run a LOT better now. I don't care what they claim, I ain't leaving my plugs in for 100K.🤣
NOTES:
1)The factory plugs I removed are covered with what appears to be sticky cosmoline on the threads, like the stuff they rub down old military rifles with! That's what it smells and looks like.... It's NOT motor oil.
2)There appears to be a "pad" attached to the inside of the hook part of the plug across from the iridium center electrode. Never seen that on any other plug before.
3)The iridium is like a pin tip, hard,brittle and delicate.
$38 shipped Priority mail from Covina Toyota in Cali via Ebay....
The pics are from a Blackberry, so please excuse the quality.😳
IMG00261-20110415-1804.jpgIMG00265-20110416-1032.jpgIMG00263-20110416-1022.jpg

Replies 80

nemelekArizona · Apr 16, 2011#2
Were they easy to change?
auxmikeThread starterLI, New Yawk · Apr 16, 2011#3
You need a 10mm socket to remove the engine cover bolts (4) first.
Under there you will see the four coil packs that are held down by another four 10mm bolts. You would need to unplug the connectors first. After that the coil pack pulls out and the hole in the valve cover is exposed, that's where the plug is. A 5/8 spark plug deep socket is needed to get the plug out.
After installing the plugs, a torque wrench is required to properly tighten them.
To answer the question, no it's not hard to do IF you have the right tools and know how/confidence.😁
Hersheynortheast · Apr 16, 2011#4
Agree with 100,000 miles seems too much . I'll usually get the iridiums changed at 70,000 > 80,000 miles . Did so with a 2000 Corolla and the fuel economy got bumped up a bit . Think they were NGK . Let us know if you get any increase in gas mileage . Don't do plugs for aluminum blocks , the old cast iron yes . Thanks for the post .
Hersheynortheast · Apr 16, 2011#5
Did you ever use CHEVRON Techron or SHELL V-Power for F.I. / fuel system cleaner before the change ? How did the plug for the #1 cylinder look ? Any different than the others ? All seem to be in same condition .
daddyoMidwest · Apr 16, 2011#6
Did my 08 sedan (52k) two weeks ago and the plugs were identical save for the screws which only had black carbon looking build-up on the half closest to the tip.
Same result as you though- Much, much smoother ride and far better acceleration.
marcustoronto, canada · Apr 16, 2011#7
Make sure u guys check the spark plug gap still

by the way I think denso only last 30k miles vs ngk iridium 120k miles
big loLoiza,Puerto Rico · Apr 17, 2011#8
NGK sparks are way better than the Denso spark plugs, nice write up Aux, I changed mine when she had 25000, and again when she hit 50000, soon to be changed again lol
AstromanWenatchee, WA · Apr 17, 2011#9
What is the proper gap? I'm 95k miles on the OEM setup and need to start thinking about these things.
Bluevitz-rsOshawa, Ontario, Canada · Apr 17, 2011#10
hopefully you used some sort of anti-seize on the threads, or come next time you change them they might be "welded" to the head. The metal in the spark plugs tends to react with the aluminum in the head causing them to bond together.
swiddCentral Alabama, GOD BLESS AMERICA · Apr 17, 2011#11
The stock ones I replaced at 86,000 were "welded" pretty good, and had almost rust-like bond to the cylinder head. I also achieved much better acceleration and cold start with new plugs, and it seems it bumped my MPG a little too.
marcustoronto, canada · Apr 17, 2011#12
Originally Posted by Astroman ↑
What is the proper gap? I'm 95k miles on the OEM setup and need to start thinking about these things.
1-1.1 mm or .039-.043 inch
Hersheynortheast · Apr 17, 2011#13
Years ago , would set the plugs to 0.40 for TOYOTA engines .
Lil AbnerDublin, Ohio · Apr 17, 2011#14
I'm pretty sure you don't gap Iridium plugs! It will damage the electrode and pad.
auxmikeThread starterLI, New Yawk · Apr 17, 2011#15
Originally Posted by Hershey ↑
Did you ever use CHEVRON Techron or SHELL V-Power for F.I. / fuel system cleaner before the change ? How did the plug for the #1 cylinder look ? Any different than the others ? All seem to be in same condition .
Never used any Techron, etc. all the plugs look as pictured, the same.
auxmikeThread starterLI, New Yawk · Apr 17, 2011#16
Originally Posted by daddyo ↑
Did my 08 sedan (52k) two weeks ago and the plugs were identical save for the screws which only had black carbon looking build-up on the half closest to the tip.
Same result as you though- Much, much smoother ride and far better acceleration.
Yeah, it DOES really make a difference! Worth doing...😛
auxmikeThread starterLI, New Yawk · Apr 17, 2011#17
Originally Posted by Bluevitz-rs ↑
hopefully you used some sort of anti-seize on the threads, or come next time you change them they might be "welded" to the head. The metal in the spark plugs tends to react with the aluminum in the head causing them to bond together.
I put a little Mobil 1 on the threads before installing. I'm sure there's still plenty of that cosmoline stuff stuck inside the hole threads.
auxmikeThread starterLI, New Yawk · Apr 17, 2011#18
Originally Posted by Lil Abner ↑
I'm pretty sure you don't gap Iridium plugs! It will damage the electrode and pad.
Sparkplugs.com states .044 for most of these Yaris fitments. I did'nt have a guage that went that big, but a .040 slid through without dragging.
I too was'nt planning on gapping the pin tip like electrode!😲
auxmikeThread starterLI, New Yawk · Apr 17, 2011#19
Originally Posted by big lo ↑
NGK sparks are way better than the Denso spark plugs, nice write up Aux, I changed mine when she had 25000, and again when she hit 50000, soon to be changed again lol
I did'nt choose either brand, I just ordered the dealer parts and a DENSO is what I found in the box.🤷
NGK are all Japan made, DENSO are a mix of Japan/USA parts, see box pic...
auxmikeThread starterLI, New Yawk · Apr 17, 2011#20
Originally Posted by marcus ↑
Make sure u guys check the spark plug gap still

by the way I think denso only last 30k miles vs ngk iridium 120k miles
Not true.
DENSO sells two types of iridium plugs;

IK16 is the "regular" Iridium plug you're writing of.

SK16R11 is the "long life" Iridium OEM replacement part they market that the dealer sold me.
RedRideMiddletown, NY · Apr 17, 2011#21
Denso make a performance and long life iridium plugs.

The difference with the perfomance plug it that it has a grove in the side electrode that is supposed to concentrate the spark and give a slighly better prerformance during rapid acceleration.
This groove is eroded away after about 30k miles and although the plug is still very servicable, the benefits of the groove are no longer present but, they wiil stiil perform like a standard iridium plug. This is why they say to replace them after about 30k.

I used the Denson performance plugs (IK16) in my Celica and they do seem to run slighty better. It's nothing dramatic however as it only a spark plug.
If you are going to change them at about 30-40 k miles anyway, you might as well go for go for the performance plugs.

BTW, I agree that 100k is way to long to change the plugs and most mechanics recomend at least pulling them out at 50k to inspect them and to prevent at them from seizing at the threads
So, if you are giong to pull them anyway you might as will replace them.
johnny_vitzHamilton, Canada · Apr 17, 2011#22
Originally Posted by Lil Abner ↑
I'm pretty sure you don't gap Iridium plugs!
^^ x10 - Definitely don't gap iridium or platinum tip plugs
auxmikeThread starterLI, New Yawk · Apr 17, 2011#23
I put them in as they came from the box.
I can't imagine dealer techs messing with a gapper with a lot full of cars to be serviced...😕
RedRideMiddletown, NY · Apr 17, 2011#24
You can gap an iridium plug. The problem is the genter iridium electrode can be easily broken if your not careful.

From NGK:
"These plugs are made to the most popular gap sizes. In case it is necessary to re-gap these plugs, carefully open the ground electrode using a pair of needle-nose pliers or a wire style gap tool. Do not use a gap wheel type tool that will pry against the center electrode and could possibly break it off."

In other words, just be careful and don't put any pressure on the center electrode.
johnny_vitzHamilton, Canada · Apr 17, 2011#25
It is highly recommended not to by most manufacturers. I know you CAN, but it is more likely you'll damage it then set the proper gap. They almost all come with the exact gap your engine needs (vehicle specific applications). I've been told by our NGK rep not to gap them
RedRideMiddletown, NY · Apr 18, 2011#26
Originally Posted by johnny_vitz ↑
It is highly recommended not to by most manufacturers. I know you CAN, but it is more likely you'll damage it then set the proper gap. They almost all come with the exact gap your engine needs (vehicle specific applications). I've been told by our NGK rep not to gap them
Yes, manufactures tell people not to gap them because they know there are many idiots out there who wont heed their advise about the center iridium electrode or may not even be aware of it.

In addition, the ground electrode is not iridium and will erode as quickly as most any other high quality plug. Remember the electrode wear on the performance plug?
Also, it is always prudent to check the gap on any new plug as there is always a possibility that one may not be set to specs.

You can't damage the plug unless you go in there like a bull in a china shop and ignore the warning about the center elrctrode. Remember the electrode is sturdy enought to withstand all the explosions for 100k miles.
marcustoronto, canada · Apr 18, 2011#27
wow toyota canada seem to switch to denso no more ngk sparks plug on toyota system friend just checked it..
fnkngrvIn The Hotbox · Apr 18, 2011#28
Wonder how the difference would be noticed if at all on a boosted motor...
BLAZINBLUEVITZNEW YORK · Apr 18, 2011#29
looks like plug change at 43,000 miles is coming up....
YaristeveLos Angeles · Apr 18, 2011#30
Originally Posted by big lo ↑
NGK sparks are way better than the Denso spark plugs,
Since you broached the subject, why is NGK better than Denso? In fact, I've always wondered why people say one company's plugs are better than another? To me, plugs are like rocks; very simple. They just consist of an electrode, insulator, and a gap.

I use standard resistor Densos in my 1988 Toyota Pickup. The truck has 180k miles on it and it is on its third set of plugs. The first set lasted 100k and the second set lasted 70k. SUre the gap was something like 0.125" but otherthan lower gas mileage, the truck ran fine with 100k mile plugs in it...

I usually run just Densos in my Toyotas because that is what usually comes in them (I believe Denso and Toyota are related somehow).
johnny_vitzHamilton, Canada · Apr 18, 2011#31
NGK makes a quality plug for a good price. The only thing wrong with denso's most of the time (especially iridiums) is the price. The quality is there, they just want too much for them.

Wonder how the difference would be noticed if at all on a boosted motor...
You're better off using copper plugs when boosting
YaristeveLos Angeles · Apr 18, 2011#32
Originally Posted by johnny_vitz ↑
NGK makes a quality plug for a good price. The only thing wrong with denso's most of the time (especially iridiums) is the price. The quality is there, they just want too much for them.
I can see how they're cheaper. Is that the only reason they're "better"?

Back in the day, the joke was, "NGK stands for No Good Kind". But, again, I never really saw how one plug could be better than another (for making power). I can see how quality might be different but then one would say, "xxx plugs are made better than yyy plugs."

Don't get me wrong; I am not defending Densos. I usually just walk into the dealership and ask for the right plugs and AFAIK, Toyota dealers always sells Densos.
johnny_vitzHamilton, Canada · Apr 18, 2011#33
Originally Posted by Yaristeve ↑
Don't get me wrong; I am not defending Densos. I usually just walk into the dealership and ask for the right plugs and AFAIK, Toyota dealers always sells Densos.
I ran OEM denso plugs from the dealer until I boosted. I would recommend NGK for almost any import. I do not believe you make more power switching plugs, the only gain switching from copper plugs to platinum or iridium is the service interval (how long you can leave them in). There is no proof NGK is better than denso, it's just an opinion.
"G"Chicago · Apr 18, 2011#34
Uhm ok? So what's the point of your post????? You changed your plugs and? I'm just trying to wrap my brain around your point?

Fyi denso and ngk make very good iridium plugs. You can't go wrong with either.
auxmikeThread starterLI, New Yawk · Apr 18, 2011#35
I stuck with the OEM plugs since I figure the Toyota engineers used Iridium for a good reason besides service intervals...
johnny_vitzHamilton, Canada · Apr 18, 2011#36
Originally Posted by johnny_vitz ↑
There is no proof NGK is better than denso, it's just an opinion.
They are both good plugs...I answered his post...
auxmikeThread starterLI, New Yawk · Apr 18, 2011#37
Originally Posted by "G" ↑
Uhm ok? So what's the point of your post????? You changed your plugs and? I'm just trying to wrap my brain around your point?

Fyi denso and ngk make very good iridium plugs. You can't go wrong with either.
If you mean me (the OP), I like to share pics and the procedure with other members to benefit the community overall. The "point" is to perhaps help others with my crappy pics and brainless thoughts about the experience of doing the job.
Are you "happy" now, can your brain start wrapping yet???🤷
Hersheynortheast · Apr 18, 2011#38
Point is , the iridium is not a miracle plug , needs to be replaced sooner than 100,000 miles . Replace at what mileage you feel comfortable with by doing it yourself or a trusty mechanic . Have used N.G.K. in past TOYOTAs with good results . Like posted before , had the DENSO iridium in a 2000 COROLLA changed with NGK iridium ( bought at A.A.P. ) by a service center at around 75,000 miles ( give or take ) and the car ran better . Little more pep and small gain in gas mileage . Even the other 1/2 noticed it .
"G"Chicago · Apr 18, 2011#39
Yes, now I understand your point and post. Basically a newb trying to help out other newbs who are just learning how to change their own plugs.

Originally Posted by auxmike ↑
If you mean me (the OP), I like to share pics and the procedure with other members to benefit the community overall. The "point" is to perhaps help others with my crappy pics and brainless thoughts about the experience of doing the job.
Are you "happy" now, can your brain start wrapping yet???🤷
auxmikeThread starterLI, New Yawk · Apr 18, 2011#40
Yeah, that's it, you got it...really!🙄
1247627894508.jpg
RedRideMiddletown, NY · Apr 19, 2011#41
Toyota owns most of Denso and that's the reason why they use Denso plugs and other denso parts.

FWIW, My '02 Celica came stock with NGK plugs and they were perfectly fine.
I assume that Toyta used the NGK plugs whenerver there was a supply plroblem with the Denso plugs.
Personally, I do not know if they still use them.
"G"Chicago · Apr 19, 2011#42
Dude they have not been a part of toyota for 62 years >> http://www.globaldenso.com/en/aboutd...ory/index.html Denso and NGK both bid on contracts to supply all automakers with their product from the factory. Denso happened to win the yaris contract. Nothing to do with ownership but rather dollars and cents. Denso and NGk also private label their products for toyota and numerous other auto companies. That is why if you buy from the dealer some will have denso on the plug but a different part # which is usually the toyota part #. Denso will also assign a different part # to signify that it is a toyota private label plug.
Focus_Sh1ftNew Jersey · Apr 19, 2011#43
Wonder how the difference would be noticed if at all on a boosted motor...
The difference is whether or not you're going to have misfires under load. Gap is very important on an NA to FI engine. You can't just run the same gap spark plug.
RedRideMiddletown, NY · Apr 19, 2011#44
Originally Posted by "G" ↑
Dude they have not been a part of toyota for 62 years >> http://www.globaldenso.com/en/aboutd...ory/index.html Denso and NGK both bid on contracts to supply all automakers with their product from the factory. Denso happened to win the yaris contract. Nothing to do with ownership but rather dollars and cents. Denso and NGk also private label their products for toyota and numerous other auto companies. That is why if you buy from the dealer some will have denso on the plug but a different part # which is usually the toyota part #. Denso will also assign a different part # to signify that it is a toyota private label plug.
Yes, they are an independent company and they must bid for Toyota contracts just like NGK, etc.
However, as I understand it, Toyota owns a large portion of Denso stock so, yes, Toyota owns part of Denso.
special_k_828Toronto, Ontario, Canada · Apr 21, 2011#45
What are the torque values for the plugs?
marcustoronto, canada · Apr 21, 2011#46
13 lbs but some says 15 lbs
marcustoronto, canada · Apr 25, 2011#47
just an update on denso iridium gap from my research.

bigger gap vs stock which is normal and the iridium part of it will compensate for bigger gap..no need to adjust but you can..
rl67pinoy808 · Apr 26, 2011#48
OIL CHANGED EVERY 5K MILES
LUCAS F/I CLEANER EVERY 5K MILES
CHEVRON 92 OCTANE ONLY
IMG_0157.jpg
"G"Chicago · Apr 26, 2011#49
OIL CHANGED EVERY 5K MILES Not long enough per toyota.
LUCAS F/I CLEANER EVERY 5K MILES Not necessary.
CHEVRON 92 OCTANE ONLY Waste of money.
Hersheynortheast · Apr 26, 2011#50
Lookin' good .