Replies continued
yaris2010RSAngus, Ontario · Apr 26, 2011#51what the hell happened to this thread? lol, it started out so nice......
very nice plugs at 120k, those can almost be put back in and used for a while longer.
on my moms camry which is at just shy of 300,000km its only on its second set of plugs, firs set wernt changed untill almost 190,000km. the random plugs i put in still look very good.
my way of thinking are, plugs are plugs, trolls are trolls :)
BLAZINBLUEVITZNEW YORK · May 2, 2011#52maybe its me BUt at 43k with a plug change car feels smoother throughout the gears and start up in the morning went from a 5-6 second crank to 2-3 seconds.....
marcustoronto, canada · May 2, 2011#53I'm cranking 1-2 seconds 80k km
swiddCentral Alabama, GOD BLESS AMERICA · May 2, 2011#54For smooth gears, spray the top of the gear box, the linkage, with WD-40. Smooth never tasted so smooth!
BLAZINBLUEVITZNEW YORK · May 2, 2011#55 Originally Posted by
swidd ↑ For smooth gears, spray the top of the gear box, the linkage, with WD-40. Smooth never tasted so smooth!
done that this weekend for the second time BUT i wasn't refering to shifting when i said smooth through the gears....
RedRideMiddletown, NY · May 2, 2011#56Yes, an iridium plug will "last 100k miles.
However, why change them at 100k? Is 100k a magical milestone?
Any plug wiil deteriorate over it's life. Granted, an iridium pluge will deteriorate much more slowly but, it's still not the same as it was when new.
So, if your car is just a ocasional grocery getter, leave them in for 100k if you like
However, if you want to maintain top performance, change them more often.
"G"Chicago · May 2, 2011#57Exactly! ^^^
bzinn 1University Place,WA · May 3, 2011#58Do not rely on that old anti seize left on head threads to work for the new plugs,always with aluminum heads put on new antiseize......or the next time it very well will be a head change needed when you break off the plug trying to get it out.....been there done that.
"G"Chicago · May 3, 2011#59Anti seize really is not necessary since the plugs have a trivalent coating on the threads. If they seize it's because they were overtightened. Also here is a link for the newbs >>
http://www.ngk-elearning.com/ Hersheynortheast · May 3, 2011#60Remove / install plugs when engine has sat for awhile is one .
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 4, 2011#61 Originally Posted by
auxmike ↑ Yeah, it DOES really make a difference! Worth doing...😛
i achieved same results!
SKurjGTA · May 4, 2011#62 Originally Posted by
"G" ↑ OIL CHANGED EVERY 5K MILES Not long enough per toyota.
Eh? Here in Canada oil change interval is 8000kms... close enough to 5k miles...
On the echo i always left it to 10,000kms and used synthetics, no issues.
In 258,000kms on the echo I changed plugs twice, always worked lovely, and I used iridiums. New Yaris with only 32k on it, likely has OEM plugs in it, I may change them up soon just for the hell of it.
fj40daveAllyn · Jan 2, 2012#63Just ordered the:
Denso Iridium Long Life Plug 3324 SK16R11 .044"
(Original Equipment Manufacturer and/or Original Equipment Equivalent) $9.35/ea
from sparkplug.com
I have 90k on my originals....we'll see what difference there is when they get here and I get 'em installed.
I know my mileage is off....I'm at about 35/mpg when I used to be close to 40.
OK....they have been swapped out.
I put some anti-seize on 'em.....I always use anti-seize when I do plugs.....hate fishing out plug holes (helicoils or rethreading)...
"G"Chicago · Jan 2, 2019#64 Originally Posted by
auxmike ↑ Not true.
DENSO sells two types of iridium plugs;
IK16 is the "regular" Iridium plug you're writing of.
SK16R11 is the "long life" Iridium OEM replacement part they market that the dealer sold me.
Wrong answer. ik16 is the iridium "POWER" plug and the one you want.
The ik16tt is the standard iridium.
The sk16r11 is the iridium long life.

nortonfbmotown · Jan 3, 2019#65Your 7 years late.
It's all in the timing,
"G"Chicago · Jan 5, 2019#66Nope, 7-year-old info needs to be updated. So when people search they are not reading outdated info.
rayfloyd170SAUDI ARABIA · Mar 14, 2019#67 Originally Posted by
auxmike ↑ Car left the factory with NGK, Toyota dealers sell DENSO replacements. Car seems to run a LOT better now. I don't care what they claim, I ain't leaving my plugs in for 100K.🤣
NOTES:
1)The factory plugs I removed are covered with what appears to be sticky cosmoline on the threads, like the stuff they rub down old military rifles with! That's what it smells and looks like.... It's NOT motor oil.
2)There appears to be a "pad" attached to the inside of the hook part of the plug across from the iridium center electrode. Never seen that on any other plug before.
3)The iridium is like a pin tip, hard,brittle and delicate.
$38 shipped Priority mail from Covina Toyota in Cali via Ebay....
The pics are from a Blackberry, so please excuse the quality.😳
My manual says to use 90919-01164 or Denso K16R-U11, can i use this iridium type SK16R11? will it make a difference?
dogsridewithUSAnotCA · Mar 14, 2019#68If wrong heat range, can get to looking like those nasty examples in photos above.
myfirstyotaToronto Canada · Mar 14, 2019#69I just go to the dealer. What they give you has to be right...no?
"G"Chicago · Mar 16, 2019#70Yes, incorrect heat range can make them look similar. These are the correct heat range, they just have a solid 100k on them. Yes, you can buy the standard oem plugs from the dealer, but they are overpriced re-badged denso anyway. Also, the dealer doesn't offer the top of the line model like the "POWER" plugs.
miragemanpoughkeepsie ny · Aug 1, 2019#71 Originally Posted by
"G" ↑ Nope, 7-year-old info needs to be updated. So when people search they are not reading outdated info.
Hit the nail on the head. I am about to change mine out tonight and started reading this many-years-old post from the beginning. Maybe late answer for the original conversation, but not a late reply for this thread at all. Keep it all in one thread, otherwise we'll have a thousand threads.
miragemanpoughkeepsie ny · Aug 2, 2019#72Well, at 101,000 miles, I changed out my oem spark plugs. Pictures look better than actual. I usually get 46-49mpg this time of year, and I have only been getting 44.5 at best this year. We'll see if the sparkplugs will help. First plug had lots of resistance when I was taking it out, I sighed, thinking I ripped out head threads, but was pleasantly surprised when it came out clean. Turns out (pun intended) I had overdone the anti-seize a few years ago on the spark plugs when I tested compression at like 18k miles (I reused the oems at that point) and it just was too gummy after all these miles. I vacuumed out each hole with a vinyl tube and the house vacuum.
I did not go with the oem iridiums. They were over $9 a piece. I found these at Advanceautoparts.com.
https://shop.advanceautoparts.com/p/...6953/5531691-P Their description online says they are "oem approved". Although they are rated for 30k miles of use as opposed to 100k, they are 1/4 of the price. Made in the USA with Japanese and domestic parts it says on the box. V-groove gimmick looks cool. The way I see it, changing these out 4 times will get me farther than the 100k, and I'm out the store door with 4 new ones for $8.40 with an online coupon! Plus if I get rid of this car before the next 100k miles, I'll be losing money on the iridiums. OEM on mine were Densos.
I feel nothing different. Starts and goes just like before. I did however do a resistance check on the new and old. 3 new spark plugs were just about 5,200 ohms, one of them was 4,820. I only was able to test one oem used one at 6,400 ohms, the others did not give a reading, I guess due to the carbon, I didn't bother trying too hard to clean the tips and get a reading. On each of the 4 oems, tips and ground straps were worn on one side only. Funny how the picture doesn't show that. I think only the good sides were facing the camera!
miragemanpoughkeepsie ny · Aug 25, 2019#73Yay! 48.3 mpg highway, light throttle 60-68mph.... loving these cheap plugs!
BIGTAZ351North Branch, MN · Oct 28, 2019#74Well then, I have some "Updating" of my own...It was found incorrect to depend on NGK’s "trivalent coating" and not using anti-seize (my mechanic friends joke as “irrelevant coating”). It has been discovered in the mechanic world that it isn't as good for corrosion/seizure protection as once thought, especially on subsequent (after first factory installation) new plug installations, as can be seen in many of the removed plug photos you will have carbon in the plug and head threads, and that can/will cause seizure of the plug, if you don’t clean it off (not recommended as you dump that crap down on top of the piston and it can damage the cylinder walls) or add a small amount of anti-seize and torque them to the proper “lubed” torque spec. After the steel “coated” but not anti-seized plug has been installed and heated thousands of times in an aluminum head, and that heating/cooling causes the plug to microscopically “walk” in the head due to the dissimilar metal’s expansion rates, creating a carbon grinding action, which breaks down the coating, and allows corrosion of causes seizure. The plug manufacturers don’t want you to use anti-seize because not many people know how to de-rate the torque spec for installing the plugs. However, there are automotive manufactures that DO recommend using anti-seize, regardless of the plug mfr’s recommendations.
Just what I have learned from the Automotive and in the Power-Sports world, in the last 8 years…
I have always used Anti-Seize as taught to at the small engine mechanic shop I grew up in, but it was more a personal preference thing. (I even use it on lug nuts and other long-term attachments, never had a problem, EVER.)
I also change my plugs long before the 100,000 mile recommendation.
bronsinnj · Nov 3, 2019#75The plugs went 150,000 miles in my wife’s Camry. The new ones didn’t make it run any better the old ones work just fine.
The accessory belt and 150,000 miles on it also before I change it. The gauge I got said it was not worn at all. I could nt Bear to throw it out.
BIGTAZ351North Branch, MN · Nov 4, 2019#76I have found going longer distances on plugs causes other problems that may or may not be apparent right away... In the old days it would burn rotor and cap due to excessive secondary resistance...NOW it causes coil packs to get hot and burn out, due to excessive secondary resistance...
I always keep the old belt in the back (along with a few tools to do the emergency change) but once they start drying out/squealing/cracking...time to kick it out, I would rather NOT have it crap out along side the road, because I was too cheap/lazy to do preventative maint.
"G"Chicago · Nov 5, 2019#77I have never had an issue not using anti-seize on plugs. My Yaris has 300k on it. I'm on my 2nd set of Denso Iridium power plugs. Oem plugs I took out at 100k. Installed the first set of Denso's and took them out at 200k. No seizures yet. I've not used anti-seize once since my first spark plug job in 1992. Not one seizure on many of my platforms, 80's rx-7's, 90's rx-7,s, 90's supra, 90's Landcruiser, 90's Toyota pickups, 90's dsm's, 2006 merc amg's, mitsu gvr4's, Cressida, 90's skyline gtr, Lancia Integrale, 2004 Mitsu Evo, the list goes on. You do not need it. It also reduces the sparkplug grounding connection.
BIGTAZ351North Branch, MN · May 13, 2020#78Well, To each their own.
I have been using anti-seize on plugs for 35 years, and have had ZERO problems, I would strongly disagree with the theory that it inhibits grounding of the plugs...My Ohm Meter also disagrees.
I am just stating what works well for me... And Preventative Maintenance is better than a tow bill.
LeegamerAshland, VA · May 14, 2020#79 Originally Posted by
BIGTAZ351 ↑ I have found going longer distances on plugs causes other problems that may or may not be apparent right away...
Can you elaborate?
Just hit 175k miles on my original plugs. Car still seems to drive the same and get the same gas mileage so I haven't bothered changing them.
mik36Bromsgrove · Aug 8, 2021#80bronsinnj · Aug 9, 2021#81I changed the spark plugs on my wife’s 2005 Camry at 150,000 miles and they looked perfect in the car ran perfect also. I think it was $40 for the iridium plugs.
Totally unnecessaryIn my opinion. But I would recommend removing the plugs so they don’t become seized. I would say 50,000 miles to remove and reinstall plugs is a good idea. I think I also put anti-seize on the new plugs I put in. If the plugs seas and you stripped them removing them that wouldn’t be good.