matthewaiOriginal postunited states · Apr 14, 2011#1hey i put in my mi springs with a friend and im pretty sure everything lined up when we were done this top piece was not popped up like this. is this bad ? is something bent ? 😕 i couldnt press it back down by hand both sides it was firm but obvi doesnt look right 😎 any one know anything 🙁
1 attachment not included in this copy
Replies 24
YAR1SRaleigh, NC · Apr 14, 2011#2I think thats pretty common for that to happen and not something that needs fixing, I could be wrong however. Dont hold it against me if I'm wrong.
mazillaSan Jacinto California · Apr 14, 2011#3That's normal, everybody that does this the first time freaks out too....I know I did, almost tore it back apart until I read up about it.
jetaimejscBville, TN · Apr 14, 2011#4ill be installing mine on friday, hopefully it does not happen to me and if it does, well, whatever..
mazillaSan Jacinto California · Apr 14, 2011#5 Originally Posted by
jetaimejsc ↑ ill be installing mine on friday, hopefully is does not happen to me and if it does, whatever..
It's supposed to be like that. 😁
Kongo-OttoGermany · Apr 14, 2011#6I`ve got H&R springs and everything looks like before under the hood. I can hardly believe this is normal. I´ve never seen that issue in german Toyota forums.
ilikericesavannah, ga · Apr 14, 2011#7jack up that side of the car and see if it goes down, or u can push it wiht your hand when its up.. if u can.. u got a problem
matthewaiThread starterunited states · Apr 14, 2011#8ill prob just leave it i guess hahah
WeeYariGeorgetown, Ontario, Canada · Apr 14, 2011#9toy_torontoTarrana, Canada · Apr 14, 2011#10nvm 🙂
why?harnett county NC · Apr 14, 2011#11 Originally Posted by
WeeYari ↑
that post needs to be repeated like a million times.
matthewaiThread starterunited states · Apr 14, 2011#12haha sorry guys it was kinda a light bulb thing i didnt even research anything i jsut put up the picture
annnseattle · Apr 14, 2011#13I have done major research into this...I am 100% sure your pic is normal !!
Aarron_MColorado Springs, CO · Apr 14, 2011#14No!!!!! 😳 I had that issue with my Megan coilovers. It was a piece of the stock assembly that was missing. This is what allowed it to come through the strut tower. No bueno.
matthewaiThread starterunited states · Apr 15, 2011#15so thats 1 for its fine and 1 for its not
Kongo-OttoGermany · Apr 15, 2011#16If you have a look at the strut assembly i can hardly find any reason why this could be normal. There must be something wrong. The upper cap prevents the whole thing from moving down.
Did u put the first nut in the right place below the big black rubber thing?
Picture not included in this copy
WeeYariGeorgetown, Ontario, Canada · Apr 15, 2011#17 Originally Posted by
matthewai ↑ so thats 1 for its fine and 1 for its not
Can you not count!
In this thread alone, there are 5 for it's OK. Now add that total to
ALL of the other strut gap threads in here and I lose count.
Go to a dealer and look under the hood of a new one. Guess what it is you'll see...
And just so that YW has it, here is the pic from post #42 in the thread over on MI. The top of the strut needs to act like a hip joint in the strut tower. Imagine the damage to the tower if the top hat was clamped down tight.
1 attachment not included in this copy
thebarberGrand Rapids, MI · Apr 15, 2011#18somebody sticky this fucking thread.
Kongo-OttoGermany · Apr 15, 2011#19yaris2010RSAngus, Ontario · Apr 15, 2011#20my car came stock with that, when i was putting in my coilovers i noticed it and like u thought there was something wrong.
annnseattle · Apr 15, 2011#21 Originally Posted by
thebarber ↑ somebody sticky this fucking thread.
Lol !!
matthewaiThread starterunited states · Apr 15, 2011#22 Originally Posted by
WeeYari ↑ Can you not count!
thanks buddy
cali yarisCanoga Park, CA · Apr 16, 2011#23@ WeeYari: All the good info comes from MI. 😁
haha sorry guys it was kinda a light bulb thing i didnt even research anything i jsut put up the picture
Right.
frownonfunRGV, Texas · Apr 16, 2011#24i think we should hold it to a vote. someone start a poll. it's obvious there's no actual stated fact on the matter so let's just go on consensus alone.*
*the above comment was purely sarcastic and was not intended to be taken in any way serious.
matthewaiThread starterunited states · Apr 16, 2011#25yeah i dont even not agree with you on that statement