350zrbOriginal postVA · Apr 25, 2009#1Hi,
I just finished installing NF210 but i have about 1/4" space between the top cap and car body (top of the strut tower).
Is this a problem?
Thanks
Pat
Replies 20
WeeYariGeorgetown, Ontario, Canada · Apr 25, 2009#2Put up a pic. I think this is something that many have questioned, and seems to be normal.
350zrbThread starterVA · Apr 25, 2009#3Got the pic but can't figure how to put in this thread.
Thanks
TamagoOff Grid · Apr 25, 2009#4350zrbThread starterVA · Apr 25, 2009#5WeeYariGeorgetown, Ontario, Canada · Apr 25, 2009#6Yep, looks like what others have reported.
350zrbThread starterVA · Apr 25, 2009#7I Just don't see how this can be OK.
The strut assembly is not really bolt on to the car if there is this gap there.
???
YarisSedanCalifornia - Bay Area · Apr 25, 2009#8Looks like you may have to tighten the top of the strut mount bolt a bit.
350zrbThread starterVA · Apr 25, 2009#9The first nut (below the cap) is already tighten. The second nut (above the cap) also tighten and wil not go down any more.
Thk
mrbondIllinois · Apr 25, 2009#10No, it's fine, actually. If you jack the car up, you'll notice that the gap goes away. I took my car to the local performance shop, and they said it's just the result of having lowered the car. No problem.
Btw, I'd put the little rubber cap back on if I were you...
tristanOrlando, FL · Apr 25, 2009#11Yep mine look like that too, no problems. I have trd springs
350zrbThread starterVA · Apr 26, 2009#12Yes, I will put the top rubber cap back on.
Thanks for info guys.
frownonfunRGV, Texas · Apr 26, 2009#13why don't mine look like that then? i have the tokico's and df210's. is it just some setups cause this gap and some don't?
350zrbThread starterVA · Apr 26, 2009#14What is Tokico? A strut?
I have original strut.
frownonfunRGV, Texas · Apr 26, 2009#15 Originally Posted by
350zrb ↑ What is Tokico? A strut?
I have original strut.
yeah, sorry, i meant the struts. tokico struts and df210 springs.
detroiterMetro Detroit · Apr 26, 2009#16Tokico HP shocks/struts are upgraded "performance" based to make handling stiffer. It is designed also for lowered applications. As in if you put lowering springs on, these things go great with them because they help stop the "spongey" feel and help from rubbing, etc.
frownonfunRGV, Texas · Apr 26, 2009#17 Originally Posted by
detroiter ↑ Tokico HP shocks/struts are upgraded "performance" based to make handling stiffer. It is designed also for lowered applications. As in if you put lowering springs on, these things go great with them because they help stop the "spongey" feel and help from rubbing, etc.
ok well i knew that i just didn't know if that was the reason there was no gap after putting these and the springs on. not that i'm complaining. the gap would bother me.
350zrbThread starterVA · Apr 26, 2009#18Yes, it's kind of bother me too.
I also cut the bump stop by 1.1"
May be I will put in hard rubber gasket into the gap?
cali yarisCanoga Park, CA · Apr 26, 2009#19I don't think there should be a gap there. Mine didn't have it. Are you sure the spring is right side up?
350zrbThread starterVA · Apr 26, 2009#20Yes, spring is right side up (logo is right side up).
350zrbThread starterVA · Apr 26, 2009#21I jacked up the passenger side of the car and took more pics.
Just like mrbond said above.
The passsenger side has no gap when the wheel is up
The driver side still has gap because the wheel is on the ground.