Yarisworld Archive

my build thread

103 posts · 45,499 views · page 1 of 3

ilikericeOriginal postsavannah, ga · Dec 27, 2010#1
just got a new camera for christmas, been waiting for this so i can post some good pictures besides my crappy phone pictures. here u go, hope u likes

rims are actually going to be the red rota's, just waiting for some new tires

4 attachments not included in this copy

Replies 102

ilikericeThread startersavannah, ga · Dec 27, 2010#2
few more

4 attachments not included in this copy

cali yarisCanoga Park, CA · Dec 27, 2010#3
^ ah that last picture, very nice! 👏
ilikericeThread startersavannah, ga · Dec 27, 2010#4
last ones

4 attachments not included in this copy

ilikericeThread startersavannah, ga · Dec 27, 2010#5
lol, thought you would like that one. i just need to add an NST, TRD, and AEM decals.. trying to keep the decals simple small and support what i have
big loLoiza,Puerto Rico · Dec 27, 2010#6
cool pics man
ilikericeThread startersavannah, ga · Dec 27, 2010#7
thanks =)
DramaRichmond,Ky · Dec 28, 2010#8
Are those pictures taken at Robeling Road.
SAV912Savannah, GA · Dec 28, 2010#9
I see you've been to the same abandoned racetrack over on Hutchinson that I have. 😁

There was a bunch of crap in the way last time I went though.

Picture not included in this copy
Picture not included in this copy

Very nice. God I need to get my TRD springs on. You look so much better than I do. Fancy that, I was thinking of doing some red Rota Slips myself. Cheers on another black local HB!

-SAV
cali yarisCanoga Park, CA · Dec 28, 2010#10
Abandoned racetrack? Noooooo!
custom LftbackHouston, TX · Dec 28, 2010#11
great pics!!!
ilikericeThread startersavannah, ga · Dec 28, 2010#12
thanks, its getting there.. rear bumper going on later this week, then ill take pictures of the (gap) the 06-08 has on the 09+ tail lights, then ill order the JDM RS tail lights from cali
new camera is AWESOME.. definitly more pictures to come

hey sav912, u need to check out buccaneerregion.com, we do autocross at hutchinson island in the pit area. next test n tune is january 29th, then the first event of the year is the following sunday, try to get there around 830am, registration closes at 930am.

the track isnt completely abandoned. its actually owned by the georgia ports authority and they had a classic car/fiat race a couple months ago. and earlier in the year they had a porshe race for the new 2010s. but thier is no weekly or monthy events.. but only licensed organizations i think can actually use the FULL track. we always got roebling =)
ilikericeThread startersavannah, ga · Dec 28, 2010#13
Are those pictures taken at Robeling Road.
no, sav912 was right, its on hutchinson island.. roebling road is a very busy and very strict track to get on even on thier off days.
Judas IscariotMount Royal, NJ · Dec 28, 2010#14
nice! 👍
SAV912Savannah, GA · Dec 28, 2010#15
Yeah. I know they still do some stuff there, but the whole course being open is an extreme rarity, hence the 'abandoned' idea Hutchinson gets labeled with a lot. Robeling Road is such a pain in the ass that I haven't bothered with it. They'll throw you out for sneezing improperly while driving.

Thanks a ton for the info on the Bucaneer Region stuff! I'll definitely have to look into that. Probably won't make it out to participate at the January event, but I would definitely like to show up and shoot some pictures. Also, let me know how the gap and JDM RS tails work out with your car. I wanted to order a set and then remembered the body differences for our cars and how much it sucks.

Order of business for now is to get my car dropped and finish the sound system. I've got components in the front doors but they're still on the stock headunit and that's just unacceptable. 😁

-SAV
ilikericeThread startersavannah, ga · Dec 29, 2010#16
definitly. ill make sure ill post the pics. u should definitly come out january even if you dont register, its free to watch. if you need help with ur suspension ill gladly come by and help u out if needed. i just did mine a month ago. coilovers actually, not lowering springs. but the rears are way too easy.

i hear u on that.. i havent decided yet if i wanna update my audio system yet. i feel its a bit too much weight added on with the larger magnets on each door. also, i feel why spend 500 on a sound system when i can use that to buy a exhaust, lsd, front bumper, MI hood or save towards a turbo. lol. but good luck dude.
SAV912Savannah, GA · Dec 29, 2010#17
Haha yeah, I didn't realize the weight difference until after I pulled the door cards off. The stock speakers are feathers! Had I known that, I definitely would've started on the power path first with an intake/exhaust setup. That said, I'll probably be chucking the spare and some other things to counter the weight gain.

I'll keep the suspension offer in mind too. Thanks. 😁

-SAV
ilikericeThread startersavannah, ga · Dec 30, 2010#18
yea.. i need new tires here shortly, therefore the spare is staying in the car unless its race day.
ilikericeThread startersavannah, ga · Jun 9, 2013#19
Gonna Resurrect my old self progress thread that I never kept up with. Gonna flood it with pictures through out the past 2 years. Will try to keep it in chronological order

10 attachments not included in this copy

ilikericeThread startersavannah, ga · Jun 9, 2013#20
more pictures

10 attachments not included in this copy

ilikericeThread startersavannah, ga · Jun 9, 2013#21
and the finals

6 attachments not included in this copy

yPod09Santa Rosa, CA · Jun 9, 2013#22
That looks so good man! Love the new front bumper and hood! Beautiful!
ilikericeThread startersavannah, ga · Jun 9, 2013#23
Thanks. Its coming together slowly. Need boost so my looks can match my speed.. haha
TerenceCruzCali · Jun 9, 2013#24
Lovin it!
1.5Tampa · Jun 10, 2013#25
It's done! so nasty looking.
ilikericeThread startersavannah, ga · Jun 10, 2013#26
yea, well, You know how they say "pictures don't look at good as it does in person".... This would be exact opposite. If you saw it in person, you could see all the gaps, cracks and parts where it wasn't filled in with bondo or fiberglass. I will settle for now.
ilikericeThread startersavannah, ga · Aug 22, 2013#27
Well, I hit a dead.... something... racoon, armadillo, possum.

Was 5am in the morning and on the interstate, wasn't tail gating but was behind another car with the cruise control on..

Saw dead animal appear behind the car in front of me at the last second. No time to dodge fast enough. I bit down as hard as I could. Made a stupid face as I watched it dissappear under the bonnet.

I listened for noise. I could hear the bones breaking when it slammed in the middle of my front bumper. Then I realized, those were not bones, that was my fiberglass bumper being caved and cracking.

Soon after, I heard that son of a monkey bounce around my under carriage like a pin ball machine. After all the noise left and was in silence I tried to imagine the damage I will see when I pull over at the next available stop.

Shoulders slumped and with pure anger for all animals that find their way between 2 solid white lines, I gripped the steering wheel, knuckles whiter than a sheet of paper, trying to pull the damn thing off. Then I screamed, cursing nature for doing this to me again.

pictures will come when I get home.
Flipper_1938Kentucky · Aug 22, 2013#28
Bummer. Are you gonna go back with the same style bumper cover? or try something different?

A coyote busted my stock bumper cover/lower grill. I bet he doesn't try that again.
ilikericeThread startersavannah, ga · Aug 22, 2013#29
Not sure. I will have to just run with this until I can afford a new bumper.

I am really unhappy with the quality of this one. The amount of rework that needed to be done on it from the body shop was insane. So many imperfections in the fiberglass. After driving it for a week, it already started cracking on both sides in front of the wheels. The tabs on the upper radiator support bracket doesn't even reach far enough back to drill a hole to line up. Extra brackets had to be made to extend to hold it up in the middle.

The shop I went to, to get it fixed from the deer accident, said that this bumper was abnormally thin. Not very thick at all. I thought he was just trying to get more labor money out of me. He was right when I found the High stress areas beginning to crack.

I took it to another guy who was gonna do it on the side for real cheap and even he said there was not much he could do other than reinforce the entire bumper again from the back. He said it was too thin to even sand down in a few spots. He used a flexible filler that is sandable. I don't know what its called but he showed me this cocking gun with a 2 part compound that he spreads on. Alot stronger than fiberglass but a bit more heavy. I said anything to keep it from cracking.

Held up so far. Didnt do the bottom of the bumper obviously.

I would like to find something for my actual year of my car so I dont have to swap out brackets and support brackets to change out my headlights to fit the bumper.

I don't know yet. Just angry right now

2 attachments not included in this copy

1.5Tampa · Aug 23, 2013#30
dang man. So sorry to hear these animals have it out for you. Is you hood open in the last pic or did the bumper also get pulled down some?
ilikericeThread startersavannah, ga · Aug 23, 2013#31
No. That's the way this hood is designed. Nasty gap at the headlights. Flush in the middle. Prob gonna sell it and go back to OEM. I'd trade it straight up in a heart beat.
1.5Tampa · Aug 23, 2013#32
yea man time to clean her up and go subtle, then you can spend money on boost or some more auto x tires lol
ilikericeThread startersavannah, ga · Aug 23, 2013#33
I don't like being subtle.

I have decided I will probably scrap this one out or sell it for super cheap and go with the Diablo front bumper to match my sides and rear. I think it would look better.

UNLESS I can find a polyurethane aftermarket front bumper somewhere. That would be great. Fiberglass has not been my friend lately.

1 attachment not included in this copy

1.5Tampa · Aug 23, 2013#34
Not bad, I just dont like when they over do the molding and it looks like a heap of cheap plastic just hanging around and a lot of those full bumper kits look that way to me
ilikericeThread startersavannah, ga · Aug 23, 2013#35
YEA! WELL YOU'RE A HEAP OF CHEAP PLASTIC. AND I DON'T LIKE YOUR FACE!

haha.. just kidding.. not really.. maybe just a bit.. actually not at all..

hehe

I see your point though. My personal opinion is that the stock bumpers look too rounded at the bottom. I like the flow of the bumper and wheels with body kits. looks more flush and low to the ground.
1.5Tampa · Aug 24, 2013#36
Originally Posted by ilikerice ↑
YEA! WELL YOU'RE A HEAP OF CHEAP PLASTIC. AND I DON'T LIKE YOUR FACE!

haha.. just kidding.. not really.. maybe just a bit.. actually not at all..

hehe

I see your point though. My personal opinion is that the stock bumpers look too rounded at the bottom. I like the flow of the bumper and wheels with body kits. looks more flush and low to the ground.
haha lmao

I can respect trying to be lower lol
cali yarisCanoga Park, CA · Aug 24, 2013#37
wow, all the troubles, sorry about that!

No. That's the way this hood is designed. Nasty gap at the headlights. Flush in the middle.
It's not designed that way. Google "micro image vented hood yaris" and you'll see several other installs showing that it's flush all around. That one is seriously warped somehow.
ilikericeThread startersavannah, ga · Aug 27, 2013#38
I guess mine was the beta hood. HAHA..

Its probably a combination of alot of things actually. The bumper tabs that are suppose to connect to the headlights do not reach, so the bumper near the headlights doesn't match either. Alot of work needs to be done.

Also Garm, do you still have the JDM (shortened) bumper reinforcement bar in stock or at least can get them when prepaid?

To top off it all off. My Sparco seat finally caved in on me when I went to get in yesterday. The bottom of the seat fell thru, the support that holds the cusion in place. So I had to drive home with my ass almost on the the floor.

Got home and put my original seat back in.. makes my car feel like crap now. I never noticed how much I untilize the bucket seat until I got in my OEM seat. Using different muscles to keep me from sliding around. Weird.

So close to just turning this into my beater Daily Driver and revert everything back to stock.
SAV912Savannah, GA · Sep 24, 2013#39
Aw man. Dude that sucks, esp about the deer. Did it take out the headlight from when we swapped? I see you have stockers back on there.

Also, you're not going back to stock. You're better than that and you're like me. We can't leave shit alone. XD

-C
ilikericeThread startersavannah, ga · Sep 25, 2013#40
LOL, thanks C.

Yea, Just the Passenger side headlamp got messed up. All the clips are broken and the housing that held the projecor broke so it rattles inside the headlamp.

You are right though. I can't go back to stock. lol.

On another note. For partial payment for rebuilding a miata motor for a friend, he got me an OEM hood off ebay. I put it on last week and it sits flush with the bumper and the headlamps. So the vented hood I got was not made to fit flush with a stock bumper. I will have pictures later today or this weekend.
1.5Tampa · Sep 25, 2013#41
Originally Posted by ilikerice ↑
You are right though. I can't go back to stock. lol.
Such a relief to hear!
yarisgeo13North Lauderdale, FL. · Sep 27, 2013#42
Nice pic's of what I've seen.
ChuckieManila, Philippines · Sep 27, 2013#43
Great pics. Nice drop/stance. Is that 1.75 drop? 16' rims. * im a decal person too if they are done and placed nicely..
1.5Tampa · Sep 27, 2013#44
He is on megan coilovers ^
ilikericeThread startersavannah, ga · Sep 30, 2013#45
^what he said. But I run 15" wheels. My rota GT3 are Et 40 with a 225/45 Hankook R-S3 as my track/autocross tires.

The ones you see are the Konig Candy which have a ET 30. I run 195/55 on those and any cheap tire I can find with a high tread wear rating.
ilikericeThread startersavannah, ga · Oct 3, 2013#46
So, I did a track event at Roebling Road Raceway last friday via Hooked on Driving. There were alot of cars out.

I was in a beginner class because the last time I did a track event was 2 years ago, But I got signed off for solo at the end of the day.

I went easy the first half of the day because my coach was stuck in the stock seat and was holding on to whatever he could get his hands on. He was really impressed on how the car handles. With a track that has 9 turns and 2 straights , well the straight between 8 & 9 isn't that long, I was able to keep up with the corvette's and Ferrari's.

There was a McLaren in the beginner class also. I was able to keep up with him in the turns also but that last straight he was already braking by the time I got to the staring line. I would catch him at turn 5 and stay on his bumper. After 2 laps of that he finally gave me the point by. I don't think he was pushing it that hard in the turns. I think he would have had a heart attack if he went off the track at any point.

There are a total of 131 pictures but most are repetitive. So I just picked out my favorites. The shots of me taking a left is at turn 3 and the ones I am just coming from a right turn going into a left is from turn 4 to turn 5.

15 attachments not included in this copy

ilikericeThread startersavannah, ga · Oct 3, 2013#47
Here are a couple pics of the track for those who have never seen it

2 attachments not included in this copy

1.5Tampa · Oct 4, 2013#48
Looks fun man. Still shocks me that these little things are such track stars lol
TerenceCruzCali · Oct 4, 2013#49
Great pictures man, car is looking nice out there!
yarisgeo13North Lauderdale, FL. · Oct 5, 2013#50
Cool track pictures! For right now that type of driving isn't in the cards for my car. No doubt you have the time and had the expenses of gearing up your car to do so. But I wouldn't mind going to a track seeing this model(s) of cars going at it for fun and see how far anyone can take this type of car on the track!!