Yarisworld Archive

my build thread

103 posts · 45,499 views · page 2 of 3

Replies continued

Mz3oh5Northern Va. · Oct 5, 2013#51
Looks nice, I like the direction that your going. Any plans on doing any paint work or customed vinyl wrapping !?
ilikericeThread startersavannah, ga · Oct 6, 2013#52
no plans. Body need to be repaired again. Probably next body kit I do I will do a color change. I am liking orange /w silver or gunmetal wheels. Next on the list is motor. Turbo with standalone. Or LSD with xB final drive with lightened flywheel and better clutch... haven't decided which I wanna do first. Both are about the same price. Bit more for the turbo because of standalone. Need a back up 1nz motor first.

Track days like this are not alot of money. ranges between 250-300 for an all day event. No need for roll cage or fire extinguishing system. just a Snell 05+ helmet.
ilikericeThread startersavannah, ga · Nov 3, 2013#53
Our region supplied some cones for a local car show and in return we set up a booth to promote our autocross events. Some pictures of mine I was tagged in on facebook

5 attachments not included in this copy

ilikericeThread startersavannah, ga · Jan 19, 2014#54
Got the 1zz throttle body in. After install, did the high/low up/down for about a minute. Let it do that til it evened out. Idles fine except on cold start up. Will Idle up to 2800 rpm's when started up but eventually drops to 700 when it reaches operating temperature. I am sure this is normal and it doesn't bother me one bit. Just letting the info out there.

Next weekend, I will get my nitto mid pipe with wideband installed. Having issues trying to hook up my A pillar gauge pod. It isn't fitting right. I may go another route and just install pods on my dash. I didn't want to drill holes in my dash, but may have to.
YesitisyarisVancouver · Jan 21, 2014#55
🙄Very nice hatch.

1 attachment not included in this copy

ilikericeThread startersavannah, ga · Jan 26, 2014#56
quick question...

Installing the wideband sensor. Where are you guys leading the wire into the cockpit from the engine bay. Was thinking about drilling a large hold and using a grommet like the 2nd O2 sensor has but needs to be bigger for the connector to go through. Is there another place you guys use?
ilikericeThread startersavannah, ga · Feb 5, 2014#57
Test N' Tune was saturday, rainy day so wasn't very effective, but was alot of fun
Sunday was our first event. I don't know my RAW time position but I came in 16 out of 84 drivers in Pax. Ran Tire class in Street Mod Fwd. Was a good run. I could have done better.

2 attachments not included in this copy

1.5Tampa · Feb 8, 2014#58
That kit is so beastly
HANZO_187Wintergarden, FL · Feb 8, 2014#59
Very nice kit.
ilikericeThread startersavannah, ga · Feb 20, 2014#60
Mandalorian Yaris

1 attachment not included in this copy

tk-421Dagobah · Feb 21, 2014#61
Oh hell yes. 👍
andres3165Minneapolis · Mar 7, 2014#62
Originally Posted by ilikerice ↑
Got the 1zz throttle body in. After install, did the high/low up/down for about a minute. Let it do that til it evened out. Idles fine except on cold start up. Will Idle up to 2800 rpm's when started up but eventually drops to 700 when it reaches operating temperature. I am sure this is normal and it doesn't bother me one bit. Just letting the info out there.

Next weekend, I will get my nitto mid pipe with wideband installed. Having issues trying to hook up my A pillar gauge pod. It isn't fitting right. I may go another route and just install pods on my dash. I didn't want to drill holes in my dash, but may have to.
Your car looks very nice, always wanted to seea Yaris with lower suspension.

What is the difference between you TB and the 1zz one. I had a Mr2 Spyder.

Andres
ilikericeThread startersavannah, ga · Mar 11, 2014#63
Sorry man, I just now saw this post.

You probably already found out about the throttle body difference. But if you haven't, 1zz throttle body is larger.
ilikericeThread startersavannah, ga · Mar 17, 2014#64
So i was at the TireRack Dixie solo regionals this weekend and I had a blast. Fierce competition.

Will be selling a few Items here shortly, I will post up in the For Sale thread also when i get all my pictures together and items off the car and ready to ship.

First off, If anyone is interested in my body kit (front, rear and sides skirts), feel free to make an offer. I will more than happy to meet someone here in the SouthEast area to save on shipping. If you want the cheapest form of shipping, I can do GreyHound which I believe is somewhere between $80-$100. So whatever you offer, add this to shipping. I will get exact quote when I can.

Items that will also be up for sale but I haven't priced them or haven't gottem a picture up yet.

-1zz throttle body
-nitto mid pipe (2pc) comes with anti-fouler for O2 sensor and a bung welded for Wideband sensor. Had on my car for 2 months, no codes.
-HID kit with halo rings. still in headlamp assembly currently but the headlamp assembly is broken. They were working fine after the accedent but I believe the mechanic touched the bulb on one of them when they were repairing my car. I will confirm this by swapping bulbs with each other. just haven't gotten around to it.
-(POSSIBLY) 23mm Ultra Racing rear sway bar, I may keep this. I don't know if this is just dead weight yet.
-3 gauge pod cover for the A pillar (black)

more stuff to come, will go through my stuff later this week. PM me an offer if you want, i may accept. Until i get my prices down and pictures up, this is just a rough draft.
1.5Tampa · Mar 18, 2014#65
Dang why are you selling?

I heard you did pretty well there. Buzz told me you killed him lol
HANZO_187Wintergarden, FL · Mar 22, 2014#66
I know iLikeRice is pretty on point with his driving I've heard. TOTALLY wish he was running with us in FL.
ilikericeThread startersavannah, ga · Mar 24, 2014#67
@phil
selling (or tossing) the body kit because I am tired of dealing with this fiberglass bumper. After the trip to Knocksville, it has so many chips in the paint and fiberglass that it isn't worth dealing with. I do not like body work... If there is someone out there that enjoys fiberglass work, by all means, you can have this kit, either pick it up or pay for shipping.

The 1zz TB is because i wanna go standalone, and if I go standalone, I will go with the cable TB. And I cant use the 1zz TB in STF class, so I have no real use for it now. If there is someone out there who is running boost on a piggy back, this would be a nice add on.

I now have 3 sets of headlights, 07-08 and 09-11 are oem.. the HID ones are broken from the accedent. i don't feel like buying another set of projector headlights.

I can't use the Nitto mid pipe til I get the turbo. So, its just collecting dust, which I don't mind and it will keep collecting dust until I sell it or I have a use for it.

I did good at the National Tour in Dixie. happy with my results. Being only 2 cars were faster, but 4 drivers beat me. The Mazda2 is a fast car if its prepped correctly. The mini cooper is just a better car all around out the box. And with the add ons allowed in STF, its just a great car. The drivers of that mini were VERY experienced.

I am glad I was able to bring home a trophy and put a Yaris on the podium.

@handzo
I do plan on makeing an event some time this year down to southern florida region. Don't know when, but I will.
ilikericeThread startersavannah, ga · Apr 19, 2014#68
I finally got my medal for coming in 5th at Dixie Solo Nationals a month ago. Its pretty big, I wonder what the 1st place looked like.

On that note, I have decided to keep the yaris. I will be boosting it eventually. But I would like to get the LSD first. Run FSP for a while and then SMF.

I would like to buy a transmission that already has the LSD in it, because I will be buying another trans anyways if I get the Kaaz from MicroImage. That is the current plan so far.

Wife talked me into keeping the yaris and stop changing my mind on different projects... Someti... Most of the time she is right...

SO, next on the to do list:
-Extended lug studs
-Wire up my gauges
-corner balance the car
-Better brake pads and SS lines (haven't decided yet on the pads)
-Harness bar and harness.
-Lighter battery (brail maybe? still looking at options)
-Trying to reduce weight without taking out the back seat and obvious interior peices

Somewhat in that order, depending on if I catch a good deal on something.

2 attachments not included in this copy

1.5Tampa · Apr 21, 2014#69
Congrats man!

The plans sound like that thing will be pretty beastly. Good luck
ilikericeThread startersavannah, ga · May 1, 2014#70
CamCom just came in. Now fumbling trying to get my gauges together.. I think my wife threw out the interior paint Scott sent me to paint that A pillar pod... Can't find it and I don't think she wants to admit she was in my garage.

Anyways, I still need a Water Temp gauge.. Oil pressure sensor for my Oil Pressure gauge, and the sandwich adapter.
CTScottUSA, CT · May 1, 2014#71
Originally Posted by ilikerice ↑
CamCom just came in. Now fumbling trying to get my gauges together.. I think my wife threw out the interior paint Scott sent me to paint that A pillar pod... Can't find it and I don't think she wants to admit she was in my garage.

Anyways, I still need a Water Temp gauge.. Oil pressure sensor for my Oil Pressure gauge, and the sandwich adapter.
What is it about wives throwing out the important stuff? Mine does that to me all the time.

I still have more if you need another batch.
ilikericeThread startersavannah, ga · May 2, 2014#72
I will get with you, Let me organize my garage again and double check.
ilikericeThread startersavannah, ga · May 2, 2014#73
Title misleading.. Need to make another thread for my build thread.. oops
ilikericeThread startersavannah, ga · May 3, 2014#74
Title fixed...yea
1.5Tampa · May 5, 2014#75
ripped off someone else's name it looks like lol 👍
ilikericeThread startersavannah, ga · May 5, 2014#76
LMAO, mod chose that title. I can request another change, I just don't know what I want it to be yet..
1.5Tampa · May 5, 2014#77
lol nah just giving you a hard time
ilikericeThread startersavannah, ga · May 30, 2014#78
A few shots at a recent autocross event in Amelia air port.

back to stock bumpers

5 attachments not included in this copy

ilikericeThread startersavannah, ga · Jun 27, 2014#79
New project is happening. Ordered parts Monday. Will arrive 4-6 weeks. Doing last bit I can to the yaris before it arrives. Then the car will no longer see any upgrades besides tires and maintenance. Spending all my turbo money I saved on this new project. Wife likes this project more than the car anyways so she doesn't mind me spending this money on it.
1.5Tampa · Jun 27, 2014#80
oooo what is it?
ilikericeThread startersavannah, ga · Jun 27, 2014#81
not car related unfortunately...
ilikericeThread startersavannah, ga · Jul 22, 2014#82
So this is my next big build. I am currently content with my yaris setup for now. I still would like to turbo it, but I don't have to space or extra car at the moment. So this is the next big thing. Something I have wanted to do for a really long time, and finally got the courage to go through with it.

Picture not included in this copy
YarisaurFlorida · Jul 22, 2014#83
What is it^??
CrankyOldManWest Michigan · Jul 22, 2014#84
Looks like Ironman cosplay?

On a car-related note, did you ever figure out where to wire the wideband O2 sensor? I'm thinking that I'll run mine through the firewall by the passenger strut tower. I've got the tools to remove the pins and/or re-crimp them on the gauge side. I'm concerned about salt damage to the external connector, but it seems to be a sealed OEM-style. I can't wait to move somewhere that doesn't salt their roads.
ilikericeThread startersavannah, ga · Jul 22, 2014#85
@Cranky
Yes, I finally got my gauges installed. I ended up going down the drivers fender and cut a small slit in the rubber grommet where harness goes from the door to the body frame (mirrors, locks, window wires). THen just ran them and I connected it to the ignition switch connector. I will have pictures up in a bit later.

This is what I want it to look like:

1 attachment not included in this copy

CrankyOldManWest Michigan · Jul 23, 2014#86
^SO much better than Ironman!
ilikericeThread startersavannah, ga · Aug 16, 2014#87
Here is my gauge pod with gauges. I only have my A/F gauge working. The other 2 are oil pressure gauges but are not hooked up. Just place holders because its a real eye sore with open pods right in my face. Color looks pretty dead on. Although the top doesn't quite sit flush with the OE panel. It will do.

3 attachments not included in this copy

FreestylinCalgary, Alberta · Aug 16, 2014#88
Cool gauges! Did you use fiberglass over the OEM panel to make the A pillar pods?
ilikericeThread startersavannah, ga · Aug 16, 2014#89
No.
I bought them off a member here. It's plastic. Nothing special. I got the paint from CTscott. I only used like an ounce. Got so much more left over.
ilikericeThread startersavannah, ga · Jan 4, 2015#90
Time for an update

Well, finished up this season in STF in 2nd place overall Pax. I wish I did more National events, only did 1 this year. Going to hang up the STF magnets and start running SMF from now on. Gonna try and spank some B series Civics and Integra's that show up, haha..

Just finished putting my 1zz throttle body back on and the Nitto Mid Pipe, which I feel is a bit small, but it will do. Also wired up the CamCom VVTi controller. Started it up and running smooth. Happy about that. Now I just need to get it tuned on a Dyno before running it. Need to find someone who is willing to tune with this.

Hood is being repainted and I think I will start repairing the bumpers and side skirts. Have a lot of paint chips and damage from autocrossing and driving to Kentucky and back. Having 2 car garage is nice also.

1 attachment not included in this copy

ilikericeThread startersavannah, ga · Jan 10, 2015#91
CamCom installed, now I need a tune

1 attachment not included in this copy

ezhacker1San Francisco · Jan 12, 2015#92
Ooh that's. Supr tiny battery you got. Interested in the dyno stats when you get it done.
ilikericeThread startersavannah, ga · Jan 12, 2015#93
HAHA, I know. I would like to thank MicroImage for that. I could have spent more for the tie down, but i wanted to see how it fit first. I HATED having a 30 lb battery that was bigger than my engine. As soon as my OEM one started acting up, that was my excuse to spend the extra on this Ballistics 3 lb one.

I will get dyno info as soon as I get it.

I do however need some who has a CamCom to give me thier VVTI specs so I can get a good base read. The tunner said it would be cheaper to adjust if I had a base as close to best performance as possible for less trial N error. Could cut down on per hour cost in half
ilikericeThread startersavannah, ga · Feb 19, 2015#94
Solo Nationals are coming up again at Dixie Region in Adel/Cecil Georgia. Trying to prep the car. Currently my car is SMF, but trying to get it back to STF before nationals. Still in need of a tune for my CamCom, but that will have to wait til after Nationals.

Current issue: Tires
Currently have Toyo R1R (140tw) and Hankook RS3 in the back (200tw)
My R1R need to be replaced because new rules state min 200 treadwear starts this year. The probem lies, Toyo is the only ones who have a tire size in 225. Hankook only has 195, Azenis 615K in 205, Rivals in 205, RE11 in 205. I would really like to run all the same tires around... I may just get the R1R again...
TYTYarisUS · Mar 5, 2015#96
Sweet car!
ern-dizCA all day · Mar 5, 2015#97
Wet laps, sweet pics.
Betriventedmonton · Mar 6, 2015#98
That is sexy
ilikericeThread startersavannah, ga · Mar 18, 2015#99
Sooo.. been doing some research.. and a long time ago, I was told the wrong thing. Since then, I have been telling people the wrong thing. Come to find out, that my spoiler is not from the S model, but a dealer added part. This makes me very sad because I really love my spoiler and do not want to give it up. At local autocross events this will not be a problem. If i decided to go to another national event though.. I will be obligated to take it off, or risk getting protested and getting all my runs DNF'ed.

Ugh..
MiSFiTx87661 SoCal · Mar 21, 2015#100
great pics👏