Yarisworld Archive

PETERPOOP's Turbo Build Thread.

97 posts · 40,102 views · page 2 of 2

Replies continued

PETERPOOPThread starterOahu · Dec 5, 2010#51
I found a pretty good deal on the HKS bov and I wanted to try it out. I don't know the quality of the ZAGE bov, and supposedly the HKS bov helps out with performance.

However, unlike most people, I'm not really a fan of the high pitched noise the HKS bov makes.
TamagoOff Grid · Dec 5, 2010#52
Originally Posted by PETERPOOP ↑
I found a pretty good deal on the HKS bov and I wanted to try it out. I don't know the quality of the ZAGE bov, and supposedly the HKS bov helps out with performance.

However, unlike most people, I'm not really a fan of the high pitched noise the HKS bov makes.

there's no way a BOV can improve performance unless the BOV you're currently using is malfunctioning. but a good deal is a good deal, go for it! what will you have to do to modify to make it work?
Focus_Sh1ftNew Jersey · Dec 5, 2010#53
^ We both believe the Zage BOV isn't working correctly and is still allowing compressor surge to happen.

Hey Peter, where did you mount your meth tank?
TamagoOff Grid · Dec 5, 2010#54
Originally Posted by Focus_Sh1ft ↑
^ We both believe the Zage BOV isn't working correctly and is still allowing compressor surge to happen.

Hey Peter, where did you mount your meth tank?
so you don't think the bypass valve is opening fully on throttle-lift?

isn't the whole idea of a recirculating valve to help prevent compressor surge?
rob323Joyner, Brisbane · Dec 5, 2010#55
Unplug the line from the bov and hook it up to a boost gauge to make sure you are getting vacuum when you lift off.
TamagoOff Grid · Dec 5, 2010#56
Originally Posted by rob323 ↑
Unplug the line from the bov and hook it up to a boost gauge to make sure you are getting vacuum when you lift off.
you should have vacuum at idle, no need to hook up a boost gauge, just unhook it and stick your finger over it while the engine is idling. you should feel if you have vacuum. is the vacuum line hooked up to the correct side of the throttle body?
rob323Joyner, Brisbane · Dec 5, 2010#57
If the vacuum line is hooked up to the wrong side of the throttle body, you will still have vacuum at idle though.
TamagoOff Grid · Dec 5, 2010#58
Originally Posted by rob323 ↑
If the vacuum line is hooked up to the wrong side of the throttle body, you will still have vacuum at idle though.
true, but not as much ;)
PETERPOOPThread starterOahu · Dec 5, 2010#59
Tamago and rob323: Ok. Here is a picture of the Zage BOV. I was told it was a re-circulating BOV, but i'm pretty sure it's atmospheric.


Picture not included in this copy

I'm kinda confused about what you guys are saying about the vacuum line coming off the throttle body. I don't see any vacuum lines on the throttle body; i went to the intake manifold. This is how I have it hooked up...

Picture not included in this copy

Picture not included in this copy

So that's how I have it hooked up. Am I doing something wrong?

Focus_Shift: Mounted the AEM meth tank inside the car. It's towards the back infront of where the spare tire goes. The backseat isn't there, so it's mounted on a board that was put there to prevent things from sliding forward, where the back seat used to be.

Picture not included in this copy
chexmixoahu · Dec 6, 2010#60
damn nice man.. cant wait to see your car in full action
pimp my yarischicago · Dec 6, 2010#61
Looks like its hooked up right to me. My BOV vented very easily and I adjusted the spring tension to make it tighter. I have some compressor surge with normal driving. U may notice a problem with dying out if it vents easily. If you recirculate BOV gasses you wont have any problems though.
PETERPOOPThread starterOahu · Dec 8, 2010#62
hks ssqv 3 blow off valve installed. hoping to tune it in the near future.

http://www.youtube.com/watch?v=zIQUd6l7r5U

Picture not included in this copy

Picture not included in this copy
TEHxFALLEN V1.2Calabasas, CA · Dec 8, 2010#63
Sick shit bro, where you get? and did you pay retail?
PETERPOOPThread starterOahu · Dec 8, 2010#64
Thanks. $150 bucks from a ebay powerseller. Needed to buy the adapter flange too.
yarisugiハワイ · Dec 8, 2010#65
Wow, that's cheap. I think I paid like $379 for the SSQV for my previous car. Your car is looking good BTW. Clean install. 👍
Bluevitz-rsOshawa, Ontario, Canada · Dec 8, 2010#66
is your AFR hitting 15-16 while you're on it?
PETERPOOPThread starterOahu · Dec 8, 2010#67
Originally Posted by cdydjded ↑
Just to let you know, if you paid $150 for it & it was new, its a fake. Its a counterfeit piece. Iv been a distributor of HKS, $150 is below wholesale. Im not flaming you or trying to insult you, Im just informing you of the fact. I have one of those on my car, so far, so good, so dont worry about it failing or anything. Here is info about it directly from HKS:

http://www.hksusa.com/info/?id=3646
I was well aware of the fakes out there on ebay. However, the price on these might be lower than you think. I was looking at reputable websites that are HKS dealers, and there were selling it new for around $200 dollars.

It has the hologram backing and everything seems to be legit? The quality looks and feels top notch.

Anywho, if it's a fake, it's a fake. I was aware of the possibility. But, I'm still sure it's better quality than the one the zage kit came with. It also sounds 10x better than the zage one, IMO. Hopefully it doesn't die out on me in a couple of days. 😉

EDIT: I looked at the website you provided from HKS about the counterfeit identification, and I am thinking mine might be legit.

According to their website, this is a fake HKS:

Picture not included in this copy


REAL HKS:

Picture not included in this copy

The difference I see here is the "HKS" emblem that is on the side. If you look at my picture of my BOV, it does have the emblem..

Picture not included in this copy

Also, my BOV didn't come with the adapter flange like the website shows the counterfeit one does. I had to purchase that separately. My box also has the Japanese characters on the back side of the box, like the real one indicates on the HKS website.

Maybe the counterfeits are getting better?

EDIT AGAIN:

Here's some pictures of the box if anyone can tell anything from that.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Originally Posted by Bluevitz-rs ↑
is your AFR hitting 15-16 while you're on it?
It might be at certain times. The car isn't tuned for the turbo yet. However, if you watch the wideband and listen to the engine, the numbers on the wideband are at about 11-12 right before I shift. That is usually the accurate AFR during the current gear you are in (from my experience). The wideband takes time to adjust through your AFR while you are WOT through the gears. So it will show numbers alot of numbers while it's trying to read the AFR, then it steadies out to a constant number right before you shift.
Focus_Sh1ftNew Jersey · Dec 8, 2010#68
Hmm, it still sounds like you're surging with the SSQV, but I might be wrong. It does sound a lot better though. I'm debating if I should follow suite or not.

As for the fake BOV, who cares? The only thing that matters is that it works. If that holds, then you just got a sweet deal on an even sweeter BOV.
PETERPOOPThread starterOahu · Dec 8, 2010#69
I don't know where you can hear any compressor surge in that video? There is very minimal compressor surge, or if any with this BOV; as far as I can hear in person. You don't HAVE to get this exact bov. There ARE others out there. ;)

EDIT: Tuning session set for this Saturday morning. :)
PETERPOOPThread starterOahu · Dec 8, 2010#70
I don't think mine is fake. 😳
TamagoOff Grid · Dec 8, 2010#71
i'm glad you went turbo :)
PETERPOOPThread starterOahu · Dec 8, 2010#72
amen to that! i now see the light
PETERPOOPThread starterOahu · Dec 8, 2010#73
Yup yup. Focus will now be put towards this Saturday's results.
PETERPOOPThread starterOahu · Dec 11, 2010#74
Ok. Here we go...

WHP: 175.14 TQ: 175.38

Dyno sheet showing current whp/tq with turbo set up in green, and comparing it to old tune with the blitz s/c in blue:

Picture not included in this copy



So, this was done on 8lbs of boost. However, the 1zz fuel injectors were maxed out. I need bigger injectors. The tuner got the A/F to a little under 12 AFR. He wants it to be at 11.5 AFR. From that, he can richen up the AFR and maybe get a little more power from it. To sum it up, i'll be getting bigger fuel injectors. How big? Not sure yet, tuner is going to figure it out.

Also, the clutch slipped during the tuning session. Yes, I am still using the stock clutch. Yes, I will now be purchasing a new stage 2 clutch. Not sure which one yet. I might get it from the tuning shop, to give him business and in return, hopefully get a cheaper rate for the labor install. Yes, I will also be getting a LSD put in at the same time.

I will be getting rates from him on how much the clutch/lsd/labor will cost on monday (supposedly).

Probably won't have those installed and retuned until the end of the year, i'd think.

He only charged me $150 for the tuning and dyno usage today. I think he felt bad that I now need a new clutch and fuel injectors. lol. He's a super cool and nice guy though. Glad to be giving him business. :)
cali yarisCanoga Park, CA · Dec 11, 2010#75
let me know if you want help with those parts, all in stock. Max power at 4700 rpm, haven't seen that before. nice torque!
Focus_Sh1ftNew Jersey · Dec 11, 2010#76
Nice numbers. You're lucky to have a nice tuner nearby.

What did you tune, just AFRs? You should see some nice additional numbers if you did timing since you're running meth.

Also, I'm kinda surprised by the injectors maxing. I've calced my 1NZs to be good for about 4500 RPMs at 8 psi of boost. It is what it is though 🤷

I'm in agreement with Garm as well. Max torque @ 4k-ish is just awesome. Zage chose a great turbo for our cars 👍
PETERPOOPThread starterOahu · Dec 11, 2010#77
Hey, you guys talking about the torque? If not, you might got it mixed up. Since the two dyno lines intersect each other, it's hard to tell which is which. The one that hits max power at 4500 rpm is the torque. It continues to dip down at 5500 RPM. The HP is the one that peaks at 5500 RPM.

The tuner did the timing also and IDK what else. Ya, he's a good guy. He tunes a lot of cars.
YodaFL · Dec 11, 2010#78
You think you would be able to raise the boost to 10? I think the stock block should be able to handle it with a really good tune. Then again I haven't really researched our engine that much myself.
PETERPOOPThread starterOahu · Dec 11, 2010#79
No clue, but I want a little longevity with my engine setup. I won't be doing that. Someone else can be the guinea pig.
YodaFL · Dec 11, 2010#80
Lol you got me there😳.When u get my tuning sorted out I will give it a test and see how long it last. Will be getting an additional block too and building that.
PETERPOOPThread starterOahu · Dec 11, 2010#81
Well if you plan on doing a built motor in the future, you would be perfect for the test. ;)

I would think you could hit 200whp with 10lbs of boost. If not, it would be close, I think.
cali yarisCanoga Park, CA · Dec 12, 2010#82
^ I think so too.
rob323Joyner, Brisbane · Dec 12, 2010#83
The injectors could quite well be getting max'd out cause the fuel pressure system has no reference to manifold pressure in a stock (return-less) fuel system. If you can raise the fuel pressure as boost increases, it would give you substantial headroom in that side of things. The other problem is that the injectors may not be spraying optimally when having to fight against the boost pressure in the manifold.
Bluevitz-rsOshawa, Ontario, Canada · Dec 12, 2010#84
I just thought of another problem you guys might be having with tunning... the stock fuel pump is a 2 speed unit. I forget exactly how it operates, but it goes something like, "low speed at idle and cruse" and "high speed under acceleration".

If someone has a repair manual, they should be able to confirm this. Because this could be causing the fuel pressure to jump around
cali yarisCanoga Park, CA · Dec 12, 2010#85
Has anyone else had trouble with fuel pressure or the pump at low boost? Seems like everyone would, or no one would.
rob323Joyner, Brisbane · Dec 12, 2010#86
But has anyone with a stock system monitored the fuel pressure while under boost? no point having 40 psi of fuel pressure at idle if the injectors are just dribbling fuel out when under boost even when at 100% duty cycle.

I don't know over there, but the one Aussie Yaris pump I have pulled out was about the same size as a D cell battery. The pump in the Echo is almost twice the size in comparison.
cali yarisCanoga Park, CA · Dec 13, 2010#87
I had 100% stock fuel system at 8 psi. With larger injectors.

I still don't understand why only one person would experience the problem, nor did you explain that point, since you say injectors can't be his problem.

Your experience is helpful -- Just quoting a pressure number doesn't help me understand.

Like Rob said before me, not one person here is monitoring fuel pressure.
I am now, but I don't think that's what you guys meant.
Focus_Sh1ftNew Jersey · Dec 13, 2010#88
I really think it's the fuel pump as well, but I can't offer any explanation as to why. Wouldn't all the blitz people experience similar problems?

The injectors maxing out just doesn't make sense though. 1ZZ should easily cover 8 psi of boost...

What's the life expectancy on a fuel pump? Maybe Peter's is on its last legs?
cali yarisCanoga Park, CA · Dec 13, 2010#89
It's not that difficult to upgrade to a Walbro 255. Can you do that without a return line?

The stock fuel pump is the size of a "D" cell battery, LOL. I posted a pic somewhere of it!
rob323Joyner, Brisbane · Dec 13, 2010#90
It's a catch 22, if you put even a small walbro in, you would overrun the capacity for the fpr and the return system and end up with a much higher base pressure, good for when on boost but crap for idling and cruising.

Someone with more smarts than me probably could come up with some sort of voltage controller which references to boost pressure and lowers the voltage to the pump at idle and cruise and just ramps it up when positive manifold pressure is detected (or maybe reference it to an air flow reading, anything over and above max NA airflow makes it send more voltage to the fuel pump. That sort of setup might get around to having to fabricate a proper return setup, and if you are going to go to that extent, then you may as well block off the factory return and put in a rising rate regulator and set it up properly.

Has anyone flowed their injectors at varying pressures to see at what pressure they start to atomise the fuel properly? This minimum pressure should be kept in mind when working out your fuel pressure requirements and the amount of boost that you are going to run.
rob323Joyner, Brisbane · Dec 13, 2010#91
Simple fix, block off the return, run max fuel pressure all the time that the pump can supply, run rich as hell and watch those injectors never get over 50% duty cycle 😆

And keep a back up supply of fuel pumps in the glove box for when they give up the ghost.😁
PETERPOOPThread starterOahu · Dec 14, 2010#92
greddy emanage ultimate. Still trying to talk to the tuner about all of this...
PETERPOOPThread starterOahu · Dec 15, 2010#93
Ok. Well I talked vaguely to the tuner via email and he suggested the walbro 255. however, i don't know if he is putting much thought into it or not whether i need to run a return fuel line or not. i mentioned it to him, but he didn't address it via email.

Question. Would the tuner be able to successfully tune with the walbro 255/larger injectors in place, and no return system?

Wondering if i should just try the larger injectors first, and see if that fixes the problem. Then if not, get a larger fuel pump and go from there.


I'll be going with the spec stage 2+ clutch and flywheel; also a Kaaz LSD.
cali yarisCanoga Park, CA · Dec 15, 2010#94
injectors go on in minutes, you'll know if you're on the right track. Installing and running a fuel pump and especially a return line is a pain in the butt.
cali yarisCanoga Park, CA · Dec 15, 2010#95
Another option is to lower the boost which will in turn require less fuel demand.
How dare you give him these silly ideas? That is not an option! 😆
Focus_Sh1ftNew Jersey · Dec 15, 2010#96
I'm surprised pimp my yaris hasn't chimed in yet, as he's running the 255 with no problems.

Then again, he wouldn't have any excessively rich problems since he's tuning in open loop.

And no reason to turn down the boost... Just don't drive really hard. I'm sure I'd be having the exact same problem if I threw my car on a dyno. Fact is, I have no plans to, and never see the need to exceed 4000 RPMs during daily driving.
PETERPOOPThread starterOahu · Feb 8, 2011#97
Just put in a Spec stage 2+ clutch, Spec lightened flywheel, and Kaaz LSD. Feels gooooood.

ps: Sorry tamango.