Yarisworld Archive

Zage Turbo Kit Install - Toyota Yaris

159 posts · 460,897 views · page 2 of 4

Replies continued

sleey0PA · Oct 4, 2010#51
Originally Posted by xbgod ↑
Dude, no reason to get butt hurt. But you always want to move on to something else and you haven't even gotten started yet. You cant add on things to parts you don't even have yet.
And there is a reason for this, believe it or not.

I am currently gathering parts.

So, naturally, I need to know what I need. Don't need to spend unwisely.

But, yes, I get to involved in the "will this work" etc.

See ya, peeps. I'll be around, but just to asnwer question about stuff I know about:0 lol

Thank yous to:
Aras, Garm, Focu, Pimp, 33OH, and anyone else I missed I apologize but THANK YOU!!!

~Wes
Focus_Sh1ftThread starterNew Jersey · Oct 4, 2010#52
So are you doing Zage?

Because the first thing I said to you was "if it's you're first time turboing, get a kit." I thought that was pretty sound advice. 😁
sleey0PA · Oct 4, 2010#53
Yes, focus. It looks that way. Might run a sc for a month just to see what it'll do.

I am waiting on Carlos to send pics.

I have time and once he does I will make my decision.
Focus_Sh1ftThread starterNew Jersey · Nov 16, 2010#54
Guide updated, tune posted.

Looks as though the Zage oil pan shouldn't be used. I'll update that portion when I get around to tapping my block for a new oil return spot.
Focus_Sh1ftThread starterNew Jersey · Jan 4, 2011#55
Got some news to share with potential Zage buyers...

I've had this itching suspicion regarding excessive oil pressure on cold start up that causes leakage out the turbos seals. I now know 100% what happened in my case.

I was running a 1ZZ TB and on cold start up was getting oil pressure at atleast 100 psi (my gauge was maxing out). The service manuals say the oil pump should be operating between 20 and 80 psi, so I wanted to look into this further.

My theory is that the greater airflow from the TB was being seen by the ECU and the ECU was turning up the oil pressure toooooo much (ONLY at cold start up. Arguably where the greatest oil pressure is needed). This is a sound theory because during normal driving conditions the oil pressure usually directly correlates to throttle position.

I swapped my 1NZ TB back on and sure enough - cold start up hit about 82 psi and there was no smoking out the hot side of the turbo. Can't really say I've noticed a loss of performance either.

In a nutshell, I think the Zage oil pan is safe to use.

... Now I just need to figure out why I can't hit max boost. 🤷
cali yarisCanoga Park, CA · Jan 4, 2011#56
^ That is all very good to know. And being able to make one change and record the difference is helpful.

What boost are you maxing out at and at what rpm? Got a video of you stomping on it to redline?
Nexus1155Dorchester · Jan 4, 2011#57
In a nutshell, I think the Zage oil pan is safe to use.
*facepalm* LOL
Focus_Sh1ftThread starterNew Jersey · Jan 4, 2011#58
Originally Posted by Nexus1155 ↑
*facepalm* LOL
Haha, I know. I'm 100% sure this time though.

Anyways, even with my tru boost installed I'm only hitting about 6 psi around 4k RPMs. Boost seems to build quickly to about 5 psi by 3k then fall off. I don't know if this is how it's supposed to be or not because I've never been in any other turbocharged car.
cali yarisCanoga Park, CA · Jan 5, 2011#59
^ You are saying that rpm alone accounts for cold start 82 psi and warm idle 20 psi or less?
cali yarisCanoga Park, CA · Jan 5, 2011#60
I'm only hitting about 6 psi around 4k RPMs. Boost seems to build quickly to about 5 psi by 3k then fall off.
I think you mean build more slowly, not fall off, right?
Focus_Sh1ftThread starterNew Jersey · Jan 5, 2011#61
Originally Posted by cdydjded ↑
Yes, oil pressure with cold oil will always be higher than with hot oil. Oil thins out as its temperature rises. Thats where the for example 5W30 # come from. Multi viscosity oils work like this: Polymers are added to a light base (5W, 10W, 20W), which prevent the oil from thinning as much as it warms up. At cold temperatures the polymers are coiled up and allow the oil to flow as their low numbers indicate. As the oil warms up the polymers begin to unwind into long chains that prevent the oil from thinning as much as it normally would. The result is that at 100 degrees C the oil has thinned only as much as the higher viscosity number indicates.

And depending on the quality/brand of the oil you will have +/- oil pressure.
Great info, thanks. Agreed on the RPM and oil pressure correlation as well. That makes a bit more sense and would still explain the excessive pressure. The pressure was actually so great that oil was leaking out of the filter.

I think you mean build more slowly, not fall off, right?
Yeah sorry. It pretty much plateaus at 6 psi. I was thinking it may have been because of a vacuum leak from a broken bolt on the TB, but after replacing the bolt and TB nothing has changed.
YodaFL · Jan 6, 2011#62
Originally Posted by Focus_Sh1ft ↑
Great info, thanks. Agreed on the RPM and oil pressure correlation as well. That makes a bit more sense and would still explain the excessive pressure. The pressure was actually so great that oil was leaking out of the filter.



Yeah sorry. It pretty much plateaus at 6 psi. I was thinking it may have been because of a vacuum leak from a broken bolt on the TB, but after replacing the bolt and TB nothing has changed.
You might have a boost leak somewhere in the piping. Does your car jerk any? how are your afrs?
Focus_Sh1ftThread starterNew Jersey · Jan 7, 2011#63
I really suspect I do have a boost leak and have had one since I installed the kit. Tomorrow I'm going to really comb over the induction system carefully. If nothing turns up, I'm gonna build a pressure tester. Also plan on hooking up a separate pressure gauge to the wastegate line and watching that.

There isn't really a better explanation for the problem I'm having. AFRs don't really indicate anything since I have complete control. One thing I did notice was significant richening at 5 psi or so while accelerating on the highway (i.e hits correct AFR for awhile, then goes richer than 10 after cruising for a bit). It's happened a couple times...
YodaFL · Jan 7, 2011#64
Originally Posted by Focus_Sh1ft ↑
I really suspect I do have a boost leak and have had one since I installed the kit. Tomorrow I'm going to really comb over the induction system carefully. If nothing turns up, I'm gonna build a pressure tester. Also plan on hooking up a separate pressure gauge to the wastegate line and watching that.

There isn't really a better explanation for the problem I'm having. AFRs don't really indicate anything since I have complete control. One thing I did notice was significant richening at 5 psi or so while accelerating on the highway (i.e hits correct AFR for awhile, then goes richer than 10 after cruising for a bit). It's happened a couple times...
Based on what your telling me it sounds like you have a boost leak. All that metered air is escaping somewhere thus leading to your rich condition.
Nexus1155Dorchester · Jan 7, 2011#65
I don't get it? You do have a BOV right? Or does it recirc?

If it blows off into atmosphere it will cause a rich condition.
When you decelerate I usually see it lean out.

Still, boost leak testing should be done to any new build, and also as maintenance over time.
cali yarisCanoga Park, CA · Jan 7, 2011#66
BOV to atmosphere on the ZAGE kit
YodaFL · Jan 7, 2011#67
Originally Posted by Nexus1155 ↑
I don't get it? You do have a BOV right? Or does it recirc?

If it blows off into atmosphere it will cause a rich condition.
When you decelerate I usually see it lean out.

Still, boost leak testing should be done to any new build, and also as maintenance over time.
he is talking about while cruising.
fnkngrvIn The Hotbox · Jun 15, 2011#68
any reason this thread died or is there nothing else to say?
Focus_Sh1ftThread starterNew Jersey · Jun 15, 2011#69
There just isn't much left to say lol. I still have a boost leak, and I'm burning a tiny bit of oil occasionally, but other than that the Zage kit is holding up nicely. Most people just PM me with their questions at this point.

I think most people have kits installed professionally anyways. Honestly, I'd do another 10 turbo installs before doing this clutch job I'm currently elbow deep in 🙄
fnkngrvIn The Hotbox · Jun 15, 2011#70
yeah, I am sure that before the year is out I will be in need of a clutch install.
Focus_Sh1ftThread starterNew Jersey · Jul 10, 2011#71
It's been about a year now and the car is still going strong. However, I've noticed I'm losing a decent amount of oil (2 quarts in 4k miles), so this time I'm DEFINITELY going to tap the block and drop the oil above the line. I still don't understand why some people can run this kit without that problem, but whatever.
BrianRiverside, CA · Jul 10, 2011#72
I used a 90° bulkhead fitting when I tapped my block. The 90° bend is inside the oil pan and exits at almost exactly the same level as the oil pick up. No leaks or issues at all with that location.
Focus_Sh1ftThread starterNew Jersey · Jul 10, 2011#73
^ That's exactly what I was going to do. What size fitting did you use? I'm hoping 1/4 NPT will be enough.
BrianRiverside, CA · Jul 10, 2011#74
Originally Posted by Focus_Sh1ft ↑
^ That's exactly what I was going to do. What size fitting did you use? I'm hoping 1/4 NPT will be enough.
-8AN (1/2") 90° bulkhead fitting for the oil return. -4AN (1/4") for the feed line. I ran the feed line from the factory oil pressure sensor underneath the intake manifold.
Focus_Sh1ftThread starterNew Jersey · Jul 10, 2011#75
Yeah I'm still using the -8 AN line, but the only fittings I was able to find (for tapping the block) was 1/2" flare to 1/4" NPT. Hopefully that won't restrict flow too much.
Focus_Sh1ftThread starterNew Jersey · Jul 10, 2011#77
Thanks Brian. I honestly think I'm just gonna order those to put my mind at ease. Are you using the return line that came with the Zage kit?
BrianRiverside, CA · Jul 11, 2011#78
I ordered all new lines and fittings and made my own. If you want I can post or send you the links for everything I used.
cali yarisCanoga Park, CA · Jul 11, 2011#79
posting would be great. I'd like to include all of that with the kits in the future.
Focus_Sh1ftThread starterNew Jersey · Jul 11, 2011#80
I'd actually like to know too. It's turning out to be a PITA to find a length of hose that isn't completely overkill.
BrianRiverside, CA · Jul 11, 2011#81
I'll post up the info when I get home. I ordered 6' stainless braided hoses and just cut them to the length I wanted. I have the sizes for all the fittings just because I wanted blue ones.
BrianRiverside, CA · Jul 11, 2011#82
Here is the list of parts you will need if you want to make your own oil feed and return lines. I have attached links to Jegs and Summit so you can see what the parts look like.

OIL RETURN LINE
(you can still use the 45 degree fitting and reducer from the Zage kit but I will list them just in case you want to replace them as I did)

3/8" NPT to 45° -8AN flare
http://www.jegs.com/i/JEGS-Performan...oductId=752558

(2x) -8AN hose end fitting
http://www.jegs.com/i/JEGS-Performan...oductId=757777

-8AN stainless steel braided hose (you can get away with 3' but I would get 6' just in case you mess up)
http://www.jegs.com/i/JEGS-Performan...oductId=752578

-8AN 90 degree bulkhead fitting
http://www.jegs.com/i/JEGS-Performan...oductId=858285

-8AN bulkhead fitting nuts
http://www.jegs.com/i/JEGS-Performan...00293/10002/-1


OIL FEED LINE
(I removed to factory oil pressure sensor and used that location for my oil feed line. You will NOT get a CEL from removing the sensor.)

-4AN to 10mm x 1.0 straight fitting
http://www.summitracing.com/parts/RUS-670500/

-4AN male to -4AN female fitting with 1/8 NPT gauge port (this is where you're aftermarket oil pressure gauge connects to)
http://www.summitracing.com/parts/EAR-100201ERL/

-4AN stainless steel braided line (6' or 10' to be safe)
http://www.jegs.com/i/JEGS-Performan...oductId=752578

(2x) -4AN straight hose end fittings
http://www.jegs.com/i/JEGS-Performan...oductId=757777

On the fitting with the 1/8 NPT port it will be a very tight fit but it will work. You may want to add a 45 degree 1/8 NPT female to 1/8 NPT male fitting for more clearance.
http://www.summitracing.com/parts/FRA-491501/
Bluevitz-rsOshawa, Ontario, Canada · Jul 11, 2011#83
Originally Posted by Brian ↑
(I removed to factory oil pressure sensor and used that location for my oil feed line. You will NOT get a CEL from removing the sensor.)
Right, but you wanna make sure you have some indicator on oil pressure, be it a gauge or a dummy light somewhere. It would suck to do all that work installing a turbo and have an oil leak or a line that pops you don't know about and cook the motor.
BrianRiverside, CA · Jul 11, 2011#84
Originally Posted by Bluevitz-rs ↑
Right, but you wanna make sure you have some indicator on oil pressure, be it a gauge or a dummy light somewhere. It would suck to do all that work installing a turbo and have an oil leak or a line that pops you don't know about and cook the motor.
I mentioned that on the second part listed for the oil feed line. I know how important the gauge is. Without it I wouldn't have known about my low oil pressure problem.
Focus_Sh1ftThread starterNew Jersey · Jul 19, 2011#85
New oil line installed. Not only has blow by seemed to stop, but I no longer smell oil burning. I should have done this from the start... Highly recommended for anyone who buys a Zage kit. Plus, it gave me a reason to buy a dremel - which I've been wanting for awhile now. 😁
BrianRiverside, CA · Jul 19, 2011#86
I had to use my dremel too. A lot easier than a drill which is almost impossible to get in that tight of a space.
Focus_Sh1ftThread starterNew Jersey · Jul 19, 2011#87
Actually, I used a 90 degree fitting for the drill since I had it, but I was definitely thinking about using the dremel beforehand. I had to use it to cut the hose - every other method didn't give me a clean enough cut.

For anyone in the future who needs to assemble their own hose - cut the hose (using electric tape), slip the compression part on and slide it down to where you want to make the actual cut. Then you simply slide it back up the hose and thread the nipple in. I found it difficult to cut the hose, slide the compression part on, then thread the nipple by only using the original cut. The end begins to get frayed. Trust me, I'm an expert at this now lol.

Again, thanks for the help Brian.
BrianRiverside, CA · Jul 19, 2011#88
I forgot to mention how to assemble the hoses. Glad you figured it out though. Maybe you can include a hose assembly DIY and the fitting sizes into the install DIY.
Focus_Sh1ftThread starterNew Jersey · Jul 20, 2011#89
Guide updated.

I re-plumbed my coolant lines today. Originally I had them in parallel, but I changed them to series instead.
Pur_BluEast Bay, Castro Valley · Jul 21, 2011#90
Have u had a chance to get your car on the dyno to check the numbers?? Even with your current tuning. Im curious to see what kinda numbers the kit puts out. Glad to see you've gone boosted for so long now with no major problems if at all
Focus_Sh1ftThread starterNew Jersey · Jul 21, 2011#91
Originally Posted by Pur_Blu ↑
Have u had a chance to get your car on the dyno to check the numbers?? Even with your current tuning. Im curious to see what kinda numbers the kit puts out. Glad to see you've gone boosted for so long now with no major problems if at all
I haven't dynoed nor do I have plans to. PETERPOOP got 175/175 with meth injection on a manual, though. That should give you a rough idea. I'm glad I haven't had any major problems either lol.

At this point, the only issue I still have is some sort of boost leak. I can only hit about 5 psi if I'm flooring it, and once I hit that point I can hear the air escaping somewhere... I've suspected this for awhile but dunno how to proceed. 🤷
Bluevitz-rsOshawa, Ontario, Canada · Jul 21, 2011#92
Put it on a dyno and look for the leak 😁
Focus_Sh1ftThread starterNew Jersey · Jul 21, 2011#93
^ Lmao... That was the first thing I thought of as soon as I hit the post button. It's actually a pretty solid idea.
Focus_Sh1ftThread starterNew Jersey · Oct 3, 2011#94
Picture not included in this copy
BrianRiverside, CA · Oct 3, 2011#95
What happened to your downpipe? Did it break? It almost looks like it was cut.
Bluevitz-rsOshawa, Ontario, Canada · Oct 3, 2011#96
Looks like the weld let go.
YodaFL · Oct 3, 2011#97
Yup that happened to mine and that's when I went open downpipe. It was for me all the vibrations and the degree of the bend I had. Over time it broke.
Bluevitz-rsOshawa, Ontario, Canada · Oct 3, 2011#98
The weld doesn't look like it had any penetration. Was this one a custom down pipe or is it part of the zage kit?
Focus_Sh1ftThread starterNew Jersey · Oct 4, 2011#99
It broke at the weld - that's why it looks like a perfect cut. Pretty annoying 🙄

Anyhoo, planning on doing some professional tuning next week. I do still suspect a vacuum leak and would also like to do ignition timing.

Otherwise I'm trying to figure out where to go from here. I'm never going to raise the boost as I need this car to be somewhat reliable. Currently I'm thinking of actually switching to a top mount intercooler(+functional hood scoop) and maybe adding meth injection with like 75% water and 25% meth (since meth is just eh with only 8ish psi).
pimp my yarischicago · Oct 9, 2011#100
This down pipe is definitley repairable. You need to install a stainless mesh flex joint and have it welded in at a exhaust shop. I had one installed on my custom downpipe and never had a problem. Check the bottom of page six on my thread and there is a picture of the one I used. U can make a pressure tester to check 4boost leaks. My friend made one for his 932 hp e85 supra and found 4 boost leaks. Now he has much more torque and less lag. He used a piece of silicon hose attached to the turbo inlet that had a round piece of aluminum to block off the end. Then he installed a 3/8 air hose quick connect fitting by threading it into the aluminum block off plate. Then he used a compressor with a regulator set to 5 psi and charged the intake with the engine off. He then just listened for all the spots where the air leaked out. He could not believe all the leaks he found. He is running 32 psi of boost now with no leaks. He also said all the hose clamps with a T-bolt were leaking. Now he installed screw type hose clamps and they are holding good. Hope this helps.