ViolinOriginal postNew Jersey · Dec 28, 2006#1Along with my HID retrofit, I'm toying with the idea of putting LED eybrows in for additional parking lamps - or even wired to come on all the time like DRLs. They'd look pretty much like
this guy did with his tC. They'd go in the area I've sloppily highlighted in yellow (but they'd be white lights). I already made a set and they're pretty bright.
I don't want my car to look ricey. What do you folks think?
3 attachments not included in this copy
Replies 62
hasher22Australia Sydney · Dec 28, 2006#2thats a yes to me...cuz it looks soo fookin hot on the 1st car
though i dont know how it will blend with the yaris. Anyway try it out, be the 1st one in the world to do it. (Hopefully)
I was thinking of making Angel Eyes for the Hatch but dont know how that could look on de yaris.
ViolinThread starterNew Jersey · Dec 28, 2006#3These might help you visualize it better (subtract the red tape).
2 attachments not included in this copy
vodkalushRochester, NY · Dec 28, 2006#4I'm not too sure how I feel about it...
I think it looks kinda like someone took some rope light and put it in their headlights (in the daytime shot); but in the darker pic it does look pretty hot.
edit: the pic did help, it seems that when they where off you wouldnt/could see or tell that you had them. But still in the daytime I dont think (according the the top post with the pic of installed) if the bulbs/leds are bright enough to have the light blend together to give you a solid light (where as in the case of say elwire... ) but they def will look hot imo at night/in the dark
hasher22Australia Sydney · Dec 28, 2006#5Its really really hard to say. Its one of those things that u gotta see it in full action b 4 u decide if it looks good or not.
U said u already made it right? well why dont u take the next step and finish ur project, hit up the night shots and day time shots and everyone can decide then.
H8SGASSan Diego, CA · Dec 28, 2006#6Looks good, how's the install? If you make them any rough ideas on a price point?
ViolinThread starterNew Jersey · Dec 28, 2006#7 Originally Posted by
H8SGAS ↑ Looks good, how's the install? If you make them any rough ideas on a price point?
$1.97 for a mini-blind adjuster rod, two 60 cent 3mm leds, a 5 cent resistor and some wire/tape/shrink wrap.
ViolinThread starterNew Jersey · Dec 28, 2006#8 Originally Posted by
hasher22 ↑ why dont u take the next step and finish ur project, hit up the night shots and day time shots and everyone can decide then.
I want to decide before I seal the headlamp back up.
H8SGASSan Diego, CA · Dec 28, 2006#9 Originally Posted by
Violin ↑ $1.97 for a mini-blind adjuster rod, two 60 cent 3mm leds, a 5 cent resistor and some wire/tape/shrink wrap.
Sweet then sell them for a killing on ebay! 😆
spkrman2 · Dec 28, 2006#10I'd say no... its kinda cheezy.
KSIbuckyFond du Lac, WI · Dec 28, 2006#11just becareful with water damage
KSIbuckyFond du Lac, WI · Dec 28, 2006#12also would you have a switch to turn them on and off or is is with the your headlights
and you should paint the whitish insert thingy black
it would be really cool to see a DIY for this
TrancosRtS Florida · Dec 28, 2006#13I like how it looks on the TC. I don't know how it would look on the Yaris though. I guess we need a guinea pig :P
What's that "tube" to put the leds on and where did you get it?
I'm trying to do some LED underdash lighting and those "holders" would come in really handy!
AdriaanMontreal · Dec 28, 2006#14Looks good i say use it as the indicator. So the top part of the headlight assemble becomes high beam and the lower part is used for the hid kit. Only thing is you could so something like what he did for the orange side marker would be also good. That stock sidemarker would ruin the beauty is you go ahead with the project.
ViolinThread starterNew Jersey · Dec 28, 2006#15ChinoCharlesOH · Dec 28, 2006#16Thats a no brainer... do it. Then, tell us how you did it. You are going to have the nicest headlights on a Yaris in North America if you finish that projector setup and this.
hasher22Australia Sydney · Dec 28, 2006#17What would be crazy is make those lights orange and make them your blinker lights!! hahaha
now that i wanna see.....
TrancosRtS Florida · Dec 28, 2006#18That's a nice project... Prolly tomorrow I'll head to the nearest home depot for the rods and check if the sale my dad found a few weeks back is still on. He found a pack of 5 White LED flashlights for 5 bucks. I don't care for the flashlights, but I do for the LEDS and maybe a pair of projectos for some small driving markers (until I get the fog lights ;-) )
NutzoidsPhiladelphia · Dec 29, 2006#19 Originally Posted by
Violin ↑
Holy Crap... That was So Cool!
😈
BMGYarisSouth Carolina, USA · Dec 29, 2006#20THAT was the best diy ever
johnnyfiveMilwaukee WI · Dec 30, 2006#21saw a pair of angel eyes pulling up behind me on the freeway the other night, it looked so hot, and then when it pulled up next to me, it was just a BMW station wagon of some sort, but still the headlights were super hot.
hasher22Australia Sydney · Dec 30, 2006#22BMW's are trend setters
static808California · Dec 30, 2006#23looks hot. install them as parking lights or turn signals, but dont leave them on like DRL's...
--B
KSIbuckyFond du Lac, WI · Jan 1, 2007#24 Originally Posted by
static808 ↑ looks hot. install them as parking lights or turn signals, but dont leave them on like DRL's...
--B
or i really wont a switch for all my after market lighting i might make a switch box and show it off a little
eTiMaGoBangkok, Thailand · Jan 2, 2007#25instead of curving the light down toward the front of the car, why not up by the side of the orange reflector thing (refer to the top right picture)?
ViolinThread starterNew Jersey · Jan 2, 2007#26Because this is the piece I'm working with:
1 attachment not included in this copy
acrbillchicago · Jan 2, 2007#27The way I look at it, if they look like crap you can just leave them in there and never turn them on.
Black YarisToledo, OH · Jan 2, 2007#28 Originally Posted by
Violin ↑ Because this is the piece I'm working with:
That piece comes off? Sweet, that will make it easier to paint with out effecting the headlight
Chris07LBNew Jersey · Jan 2, 2007#29ViolinThread starterNew Jersey · Jan 3, 2007#30That might be good if they come in white and an appropriate length. I'll see what he has.
Thanks.
BlenjarCT · Jan 11, 2007#31So how is it? ur done yet?
-- Blen
1 attachment not included in this copy
ViolinThread starterNew Jersey · Jan 11, 2007#32A few more days - I think.
vodkalushRochester, NY · Jan 11, 2007#33 Originally Posted by
Violin ↑ A few more days - I think.
thats not good enough, we need a specific date and time!!
🙄
BlenjarCT · Jan 11, 2007#34 Originally Posted by
vodkalush ↑ thats not good enough, we need a specific date and time!!
🙄
Indeed...give a time..
r u gonna black housing ur headlights while your at it too?
-- Blen
TrancosRtS Florida · Jan 11, 2007#35The closest Home Depot had the LED flashlights but not the clear rods. Now I started my classes so I don't think I'll get to work on the lightning project anytime soon:(.
If anyone is intereted, Home depot has a pack of 5 Husky white LED flashlights for $4. You get 5 white led Flashlights (to obtain 5 bright leds and their driving circuitry and 10 AAA batteries. A small 600ohm resistor will drive the Leds for any need you might have ;)
ViolinThread starterNew Jersey · Jan 12, 2007#36This is a much better place to get LEDs:
http://www.lsdiodes.com/ They have 3mm LEDs that are 5,000 mcd (I think - site is down) and 5mm, 12,000 mcd LEDs. That's really, really bright. They also have a link to a calculator (in the resistor section) that calculates the proper resistor for you.
ViolinThread starterNew Jersey · Jan 25, 2007#37Thanks to all who responded. I was all set to do this - I had them all fabricated, put them in place and tested them out. It really looked pretty good. The problem is - there is a plastic piece inside of the headlight housing that slips in between the two chrome pieces when the headlight is together - right where the eybrow sits. I could have modified it but decided not to.
I see Audi copied me. The new R8 will have a row of 12 LEDs as running lights on the bottom of the light. I should get $10 from each sale.
Picture not included in this copy
Picture not included in this copy
TrancosRtS Florida · Jan 25, 2007#38Bummer... What about placing them in the same place where Audi did: Just under the headlight housing>
ViolinThread starterNew Jersey · Jan 25, 2007#39You need that space for the reflector to move so you can adjust the headlights down.
I thought about a row of LEDs like the R8 will have, but don't really like the look of a bunch of point sources.
BeauFrederick, Maryland. USA · Feb 16, 2007#40Are they installed yet? pics?
BlenjarCT · Feb 17, 2007#41i kno rite..wtf!
-- Blen
Chris07LBNew Jersey · Feb 17, 2007#42Reading is fun when you know how... 😛
Originally Posted by
Violin ↑ Thanks to all who responded. I was all set to do this - I had them all fabricated, put them in place and tested them out. It really looked pretty good. The problem is - there is a plastic piece inside of the headlight housing that slips in between the two chrome pieces when the headlight is together - right where the eybrow sits. I could have modified it but decided not to.
BlenjarCT · Feb 17, 2007#43MOdify it man...i'll pay 5 bux.
-- Blen
Chris07LBNew Jersey · Feb 17, 2007#44🙄 🙄
🤣
BlenjarCT · Apr 23, 2007#45yrsdrgnSF,CA · Apr 23, 2007#46i wish i could get some of that customization done on my car haha
Chris07LBNew Jersey · Apr 23, 2007#47Not a fan of that one..
brickhardmeatInner City, Dallas · Apr 23, 2007#48looks kind of christmas decorationy😁
yrsdrgnSF,CA · Apr 23, 2007#49any recent pics of the install?
evilreignTX · Apr 25, 2007#50Damn, looks alot better than I imagined. Props!