Yarisworld Archive

Poll - LED Eyebrows for the Yaris - Vote Yea or Nay

63 posts · 20,647 views · page 2 of 2

Replies continued

yrsdrgnSF,CA · Apr 25, 2007#51
any updates?
ViolinThread starterNew Jersey · Apr 26, 2007#52
As posted above, I ran into problems and decided not to install them.
yrsdrgnSF,CA · Apr 27, 2007#53
here's a somewhat farfetched idea but maybe you can try drilling some 5mm or 3mm holes into the "eye lashes" of the LB housing and then wiring them up to the parking lights? like i said, it's farfetched

also, aside from the fitting problems what other problems were there?
ViolinThread starterNew Jersey · Apr 27, 2007#54
Oh you could drill and mount individual LEDs all sorts of ways. You'd need to wire it up properly with appropriate resistors of course.

I'm not a fan of the bunch of little point sources of light look like the photo Blenjar posted though. I wanted a look more like the angel eyes around BMW lights. It just couldn't be done without hacking up the housing and I didn't want to do that.
yrsdrgnSF,CA · Apr 27, 2007#55
hold up....so if you were to put angel eyes onto your retrofitted HIDs you'd have to hack away at the shroud or the housing?
ViolinThread starterNew Jersey · Apr 28, 2007#56
If I had put these in, I'd have to modify the interior trim pieces.

Picture not included in this copy
yrsdrgnSF,CA · Apr 28, 2007#57
o i see. interesting food for thought.
ViolinThread starterNew Jersey · Apr 28, 2007#58
The piece that would need to be trimmed is the opaque plastic piece that rides inside the lens.
yrsdrgnSF,CA · Apr 28, 2007#59
o. that shouldn't be that hard to trim (or i don't think it would be) would've been great if you installed them though. maybe you could sell the set you made to someone?
BlenjarCT · Apr 28, 2007#60
Hey do you still have that plastic?

-- Blen
brickhardmeatInner City, Dallas · Apr 28, 2007#61
Originally Posted by Blenjar ↑
Hey do you still have that plastic?

-- Blen
Wait, I thought the set that he did are the retrofitted ones on the car, I think he is just saying he didn't do this led eyebrow because it was gonna look cheeze. Anyway, that's what I am hearing. 🤷
Chris07LBNew Jersey · Apr 28, 2007#62
you hear correct.... i think. 😕
ChinoCharlesOH · Apr 29, 2007#63
I think what he was saying was it would take too much cutting to get them to fit. You'd have to cut part of the headlight cover off, a scary thing when the only two headlights you have are the two you're cutting. This is left to the more adventurous type. Who's calling dibs? For +284,000 put eyebrows in a Yaris.